Solving Common Problems - Samsung APV48Q0AN User Manual

Floor stand type air conditioner ( cooling and heating )
Hide thumbs Also See for APV48Q0AN:
Table of Contents

Advertisement

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
The air conditioner does not
operate at all
The air conditioner does not
operate with the remote control
No beep is heard when you press
the
remote control
The air conditioner does not cool
or heat
The fan speed does not change
when you press the
The air flow direction does not
change when you press the
The Timer is not correctly triggered
Odour is permeated in the room
during air conditioning
26
E-
141 Kinderkamack Rd, Park Ridge, NJ 07656 Tel: 201-782-1782 Fax: 201-782-1783 Web: www.amgair.com Email: info@amgair.com
Problem
(On/Off) button on the
button
or
button
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the indoor unit is turned on;
if necessary press the
◆ Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically.
- Cancel the Timer (see page 21 for further details).
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit (7 meters/ yards
or less).
◆ Check that you are pointing the remote control at the remote control
sensor of the indoor unit.
◆ Replace the remote control batteries if necessary.
◆ Check that the correct operating mode has been selected
(Cool, Auto, Heat).
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 25 for cleaning
instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
◆ Check that the operating mode is set to Cool, Heat or Fan;
in the Auto, Turbo, Long and Dry mode, the fan speed is
controlled automatically.
◆ Check that the air conditioner has been switched on; if necessary,
press the
(On/Off) button on the remote control.
◆ Check that the timer has been programmed correctly;
see page 21.
◆ Air the room.
Air Marketing Group LLC
Explanation/Solution
(On/Off) button on the remote control.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents