Solving Common Problems - Samsung AM18B1B2C09 Instruction & Installation Manual

Table of Contents

Advertisement

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
The air conditioner does not
operate at all
The air conditioner does not
operate with the remote control
No beep is heard when you press
the
(On/Off) on the remote
control
The air conditioner does not cool
The fan speed does not change
when you press the FAN button
The air flow direction does not
change when you press the
SWING button
The timer is not correctly triggered
Odours are permeated in the room
during air conditioning
22
E-
Problem
Check that the breaker used for the air conditioner is switched on.
Check that the 5 Way indicator on the indoor unit is on;
Check whether the TIMER indicator on the indoor unit is switched on.
Check that there are no obstacles between you and the indoor unit.
Check the remote control batteries.
Check that you are close enough to the indoor unit
(seven metres/yards/23ft. or less).
Check that you are pointing the remote control at the remote control
Replace the remote control batteries if necessary.
Check that the correct operating mode has been selected
(AUTO, COOL).
The room temperature may be too low or too high.
Dust may be blocking the air filter guard; refer to page 21 for cleaning
Check that there is no obstacle in front of the outdoor unit.
Check that the operating mode is set to COOL or FAN ;
in the AUTO mode, the fan speed changes automatically and in the
DRY mode, it is set to AUTO.
Check that the air conditioner has been switched on; if necessary,
Check that the timer has been programmed correctly; see pages 16
Air the room.
Explanation/Solution
if necessary press the
(On/Off) button on the remote control.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 16 and 17 for further details)
sensor in the right of the indoor unit.
instructions.
press the
(On/Off) button on the remote control.
and 17.

Advertisement

Table of Contents
loading

Table of Contents