Polaris 2007 Sportsman 500 EF Service Manual page 327

CHARACTERISTIC MIN TYP MAX UNIT
ECM_MEM OUTPUT
MEM Circuit Limit
Battery Reverse Current
Reverse Bias Voltage
Pull-in Current
Hold Current
TURF MODE Input
TURF MODE Input
Pull Down
Solenoid Speed Limit
STARTER Current
TRANS Park Limits
TRANS Neutral Limits
BRAKE Input
(constant power for ECM and Instrument Cluster)
0.2 1.2 Amp
REVERSE POLARITY PROTECTION
1.8 2 mA
-55 Vdc
DIFFERENTIAL SOLENOID DRIVER (X2 ONLY)
9 A
2 A
0 16 V
5K Ohm
15 MPH
STARTER LOCKOUT
10 A
0.32 1.02 V
1.83 2.53 V
0 16 V
NOTE
Current capability of the output
Max reverse leakage current when connected in reverse
Absolute maximum reverse voltage
before device breakdown.
Max pull-in current when solenoid is energized
Max holding current when solenoid is energized
Input voltage range
Resistance to ground on input pin
Max SPEED input to prevent
differential solenoid engagement
Maximum load current
Voltage range to enable STARTER output
Voltage range to enable STARTER output
Input voltage range
ELECTRICAL
10
10.9