Output Setup Function - Honeywell TUXWIFIS Installation And Setup Manual

To set the NIGHT function, do the following:
Press the Setup > System setup
authorized code.
Select the arming mode to be activated when NIGHT
accepts the setting.
Apply

Output Setup Function

Tuxedo can activate/deactivate up to 18 pre-defined control panel output functions (if programmed in
the control panel). The Output Setup screen displays Output selections. Control these output functions
by enabling/disabling as follows:
Press the Setup , System setup
Authorized Code.
Press the Output Setup
screen; then press Apply
Press to save the setting.
OK
If the Back icon is pressed, a confirmation window appears stating:
you want to save new settings?"
NOTE: This is a local setting for the graphic keypad. If user has the maximum number of keypads on
the system, and wants to disable the same output for all, each Tuxedo needs to be set
individually.
Security (cont'd)
> Advanced Setup
cancels your selection.
Back
and Advanced Setup
icon and select the outputs to display or not display on the Output
. A confirmation window is displayed stating:
Select or
Yes No.
32
icons. If required, enter your
is selected on the "Arming" screen.
icons. If required, enter your
"Information Settings saved"
"Output Settings changed. Do