Room Setup; Group Setup - Honeywell TUXWIFIS Installation And Setup Manual

Set the Zones: In the Trigger/Condition box, press Add. Press the ZONES button and select a zone
from the drop-down menu. Select Restore, Alarm or Fault.
NOTE: Do not use 24 hr silent zone restore/fault in the pre-condition and trigger fields on
commercial panels.
Set Lights (on/off): In the Action box, press Add. Press the LIGHT button and select a Light
Device from the drop-down menu; set the action to ON, OFF; or select ON FOR TIME and press
on the "Hour/Minutes" displayed and enter an amount time.
NOTE: ON FOR TIME allows you to activate the scene for a specified period of time.
Set the Recording: In the Action box, press Recording and select the camera for recording. Select
Save when done.

Room Setup

A room is a defined collection of different types of Z-Wave devices (such as light modules, door locks,
thermostat, etc.). Up to 50 rooms can be created. Follow the procedure below to create a Room.
From the "Home" screen, press the Automation
Enter a room name on the "Data Entry" keyboard and press GO.
Check the box next to the device(s) that you want to be controlled in this Room and press the Save
icon.
Select the Edit icon to make changes to existing Rooms; use the Delete
If settings were changed, a pop-up confirmation window displays:
Select Yes or No.
save?."

Group Setup

A group is a defined collection of the same type of Z-Wave devices (such as only light modules, or only
door locks, etc.) that can be used in scenes. When used in a scene and the scene activates, all devices
assigned to that group activate. Up to 20 groups can be created with up to 10 of the same type devices in
each group, such as 10 door locks, etc. Follow the procedure below to create a Group.
From the "Home" screen, press the Automation
Highlight the "Group Name" field and enter a room name on the "Data Entry" keyboard and press GO.
Select the Group Type (Binary Light, Door Lock, Thermostat, Multilevel Switch, Shades, Other) from
the drop-down list.
Highlight the device(s) from the drop-down list that you want to add to this "Group" and press Save
A confirmation message is displayed:
Select the Edit icon to make changes to existing Groups; use the Delete
Z-Wave Setup (cont'd)
Room Setup
!
Group Setup
!
"Z-Wave device group settings saved."
37
> Add icons.
icon to delete a Room.
"Settings changed. Do you want to
> Add icons.
icon to delete a Group.
.