Removing-Refitting Passenger Presence Sensor - Fiat Bravo/Brava Workshop Manual

Bravo- Brava
98 range
Electrical equipment
Air Bag - New features
55.
R E M O V I N G - R E F I T T I N G
PRESENCE S E N S O R ( P P D )
PASSENGER
R e m o v i n g - r e f i t t i n g
Remove the front seat cushion cover as de­
scribed in the pargaph "Removing-refitting front
seat cushion cover" and the cushion heater pad
(if fitted).
1. Cut the sealant, taking great care not to
damage the sensor.
The sea/ant is designed to ensure the
correct operation of the PPD sensor.
The moment the sea/ant is removed,
for any reason, the manufacturer's
guarantee is no longer valid. When re­
fitting, renew the guarantee sealant
with genuine Fiat sealant.
2. Release the passenger presence sensor sup­
ply wiring from the retaining band.
3. Remove the PPD sensor from the cushion
upholstery working carefully to avoid dam­
aging it.
4. Disconnect the connector in the connector
box (shown in the inset), then remove the
passenger presence sensor supply wiring
from the bottom of the seat.
Copyright by Fiat Auto 27