Turbo Pressure Control Solenoid - Fiat Bravo/Brava Workshop Manual

Engine
Fuel feed system
10.
Bravo- Btava @ ™
2000 range
1. Unscrew retaining nuts (1) and remove the
vacuum tank.
TURBO PRESSURE
CONTROL SOLENOID
Removing-refitting
- Position the vehicle on a lift and discon­
nect the negative battery lead. .
2. Working from below the car, disconnect
electrical connector (1) and pipes (2).
3. Press the retaining tab on the rear of the
bracket and withdraw the solenoid.
FUEL FILTER
Removing-refitting
4. Disconnect electrical connections (1) and
tank inlet and outlet and pump delivery
pipes (2) on the fuel filter, then undo nuts
(3) securing the fuel filter mount. Lift the
filter and disconnect electrical connection
(4) to the sensor for detecting the presence
of water in diesel.
34
Print n 506.670/22