Bravo-Btava <fl*»
2000 range (6)
Engine
Fuel feed system
10.
ACCELERATOR PEDAL
POTENTIOMETER
Removing-refitting
-
Disconnect the negative battery terminal.
1. Remove the shield under the dashboard lo
cated by the pedals.
2. Remove the potentiometer idler rod from
the accelerator pedal.
3. Undo the nuts fixing the potentiometer to
the mounting bracket and detach the po
tentiometer after having disconnected the
connector.
ACCELEROMETER ON T I M I N G SIDE
ENGINE SUPPORT
Removing-refitting
-
Disconnect the negative battery terminal.
4. Disconnect the electrical connection (1),
then undo the fixing bolts (2a) and detach
the accelerometer.
Copyright by Fiat Auto
1