Blaupunkt LS175 Owner's Manual page 15

LS175
- Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it
will re-enter pairing mode automatically.
1. During ON mode, press the
SOURCE button on the remote control to select Bluetooth mode. The
Bluetooth indicator will flash slowly.
2. The system has entered pairing mode.
- Or press the PAIR button on the remote control to be searchable. The
Bluetooth indicator will flash rapidly.
3. Activate your Bluetooth device and select the search mode.
"BLAUPUNKTLS175" will appear on your Bluetooth device list.
4. Select "BLAUPUNKTLS175" in the pairing list. The Bluetooth indicator will
light up solidly while the pairing succeeds.
5. To disconnect the Bluetooth function, switch to another function on the unit
or disable the function from your Bluetooth device.
Tips:
1. Enter 0000 for the password if necessary.
2. If there is an existing connection, press the PAIR button on the remote
control to re-activate the pairing mode, the connection will be interrupted.
3. If no other Bluetooth device pairs with this player within two minutes, the
player will recover its previous connection.
4. The player will also be disconnected when your device is moved beyond the
operational range.
5. If you want to reconnect your device to this player, place it within the
operational range.
6. If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the player.
7. If the connection is lost, follow the instructions above to pair your device to
the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution
Profile (A2DP), you can listen to the music stored on the device through the
player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you
can use the player's remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
- To skip to a track, press the
/SOURCE button repeatedly on the unit or the
button.
/ buttons.
14