Blaupunkt LS175 Owner's Manual page 11

Bluetooth soundbar
Table of Contents

Advertisement

Available languages

Available languages

LS175
Replace the Remote Control Battery
1. Pull out the battery tray and remove the old battery.
2. Place a new CR2025 battery into the battery tray with correct polarity (+/-)
as indicated.
3. Insert the battery tray back into the slot.
Precautions Concerning Batteries
1. When the Remote Control is not to be used for a long time (more than a
month), remove the battery from the Remote Control to prevent it from
leaking.
2. If the batteries leak, wipe away the leakage inside the battery compartment
and replace the batteries with new ones.
3. Do not use any batteries other than those specified.
4 . Do not heat or disassemble batteries. Never throw them in fire or water.
5. Do not carry or store batteries with other metallic objects. Doing so could
cause batteries to short circuit, leak or explode.
6. Never recharge a battery unless it is confirmed to be a rechargeable type.
CONNECTIONS
Use the OPTICAL Socket
- Remove the protective cap of the OPTICAL socket, then connect an OPTICAL
cable (not included) to the TV's OPTICAL OUT socket and the OPTICAL socket
on the unit.
Tip: If there is no sound come out of the soundbar and the indicator light flash
fast. Make sure the audio setting of your s ource player (e.g. DVD player, game
player, TV) is setted to PCM with optical input.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents