Creating A Chain; Programming; Deleting A Chain - Viscount RD-70 Quick Reference Manual

3.1Creating a CHAIN

* The RD-70 can be programmed to automatically playback a series of songs
in the order selected by the user (CHAIN).
The procedure is described below:
1) While holding ENTER, press the PROG button (the relative LED will start
flashing).
2) Press the SONG < or > buttons to set the number of the song that you want
to include.
3) Confirm with ENTER.
4) Repeat points 2) and 3) for each song that you want to program in sequence
(max possible number is 99).
5) At the end of selection, press STOP (the PROG LED will remain on,
indicating that the programming has been stored in the memory).
6) Press PLAY to start chain playback. The chain can be stopped at any time by
pressing STOP or PAUSE.

3.2Deleting a CHAIN

* The chain programming remains stored in the memory even when the unit is
turned off.
As subsequent programmings will be added onto previous ones, it is advisable
to delete any chain already existing in the memory before programming
another.
Check the PROG LED in order to see whether the memory is free - the LED
should not be illuminated.
If the LED is on, while holding ERASE press PROG to clear.
N.B. The chain will not be able to work if a floppy disk other than the one
containing the songs programmed in the chain is inserted in the drive.
If the chain is called up with the PROG button during normal playback of a
song, the chain will begin after the end of the song.
3.3Random Playback
* It is possible to playback all the songs on a disk, or all the songs included in a
chain, in random order.
1) Press RND (the relative LED will light up), then PLAY.
Random playback of the songs on the disk will begin and can be interrupted by
pressing STOP.
2) Actuate the PROG function (LED will light up) then follow procedure 1).
Random playback of the programmed songs will begin and can be interrupted
by pressing STOP.

PROGRAMMING

SONG TEMPO
PROGRAM ENTER RANDOM
SINGLE REPEAT
PROGRAM
REW FF STOP PLAY PAUSE
PROGRAM
SONG TEMPO
PROGRAM ENTER RANDOM
SINGLE REPEAT
SONG TEMPO
PROGRAM ENTER RANDOM
SINGLE REPEAT
REW FF STOP PLAY PAUSE
ERASE
STANDBY
REC
ERASE
STANDBY
ERASE
STANDBY
REC