Programmed Pause; Chain Operations; General Parameters - Viscount RD-70 Quick Reference Manual

3.4Programmed Pause

* In chain playback, the RD-70 can also set the interval time between one song
and another.
1) While holding ENTER button press also PAUSE.
2) Use the REW and FF buttons to choose the desired interval (in seconds)
which will be shown on the display.
3) Confirm with ENTER.

3.5CHAIN Operations

* In PROGRAM mode (PROG LED on) it is also possible to use the single
playback, random order, repeat, and random repeat functions.
* Press PROG then SINGLE to playback the programmed songs one at a time:
after playback of the first song, the RD-70 will automatically go on STOP and
wait for the go-ahead for playback of the next song - given by pressing PLAY.
* Press PROG then RND for continuous repeated playback of programmed
songs in random order. Press STOP to interrupt.
* Press PROG then RPT for continuous repeated playback of the chain. Press
STOP to interrupt.

3.6General Parameters

* When purchased, the general parameter values determining operation of the
RD-70 are as follows:
AUTOREW (')
AUTOPLAY (')
SONG INTERVAL TIME (")
SOFT-THRU ("')
ACTIVE SENSING ("')
MIDI CLOCK SELECT (")
MIDI CLOCK OUT ("')
MIDI UPDATE ("')
EXCL.SYSTEM DUMP ("')
ON
ON
sec
ON
ON
AUTO
ON
ON
PROGRAMMING
SONG
TEMPO
PROGRAM ENTER RANDOM
SINGLE REPEAT
REW FF STOP PLAY PAUSE
PROGRAM SINGLE
PROGRAM RANDOM
PROGRAM REPEAT
PROGRAM REPEAT RANDOM
ERASE
STANDBY
REC