Beat Number; Repeat Function - Viscount RD-70 Quick Reference Manual

N.B. The functions described in section 2.4 can only be actuated if the RD-70
is in PLAY, PAUSE or STOP mode.

2.6Beat Number

* The RD-70 features a function for displaying the beat number. This is very
useful as it allows the user to see exactly what point of the song is being
played. To actuate this function, press FF and REW simultaneously.
2.7REPEAT Functions
* The RD-70 can repeat a whole disk, a single song or a specific section of a
song
* To repeat a whole disk, simply press REPEAT (the LED under the button will
light up) before or after starting palyback. It will be played through to the end
of the last song recorded on the disk, then the device will go back to the first
song and start all over again.
To exit this funcion press STOP (playback will be stopped) and press REPEAT
again (LED under button will go off)
* To repeat a single song, proceed as follows:
1) Press the SINGLE button and REPEAT button (the relative LEDs will light up)
2) Select the desidered song with the SONG < and > buttons and start
playback.
The song selected will be repeated until the stop button is pressed.
* To repeat a specific section of a song:
1) Select the song containing the block to be repeated
2) Turn on the single function
3) While olding ENTER, press REPEAT. The relative LED will start to flash
slowly.
4) Use the REW and FF buttons to move the start of the block that is to be
repeated and press ENTER ( the REPEAT button LED will start to Flash quickly).
5) Use the REW and FF buttons to move the end of the block that is to be
repeated and press ENTER
6) At this point the block has been defined: The REPEAT button Led will stay on
and the playback can be started by pressing PLAY
* It is possible to alternately position the device at the start or the end of the
set block. To do this, while holding STOP press REPEAT
* If the AUTOREW function has been actuated (see section 2.10), if the STOP
button is pressed during block repeat, the RD-70 will automatically go back to
the start of the song being played.
* To delete the block from the divice's memory, stop playback then, while
holding ERASE, press repeat
PLAYBACK
REW FF STOP PLAY
FF REW
SONG
TEMPO
PROGRAM RANDOM
ENTER
SINGLE REPEAT
SINGLE REPEAT
SONG TEMPO
PROGRAM RANDOM
ENTER
SINGLE REPEAT
REPEAT
SONG
TEMPO
PROGRAM ENTER RANDOM
SINGLE REPEAT
REW FF STOP PLAY PAUSE
SONG TEMPO
PROGRAM ENTER RANDOM
REPEAT
SINGLE
REW FF STOP PLAY PAUSE
PAUSE REC
ERASE
STANDBY
ERASE
STANDBY
ERASE
STANDBY
REC
ERASE
STANDBY
REC