Storing; Recording Errors - Viscount RD-70 Quick Reference Manual

4.3Storing

* Data storage is carried out completely automatically DURING actual
recording. This is the fundamental characteristic of the "direct to disk"
read/write system used by the RD-70 which uses the disk directly as the data
loading and unloading unit since it does not have buffer memory banks (RAM).
* The RD-70 also organizes the recognition of songs on the disk, assigning
automatic progressive numbering to them: each song is identified by a number
higher than that of the last song identified on the disk.

4.4Recording Errors

* As the RD-70 has been designed to essentially read recorded songs, it does
not have any specific functions for correcting material stored on the disk.
Therefore, if there are performance errors the only way to correct them is by
repeating the whole recording procedure after deleting the whole song. See
FLOPPY-DISK 5.3 for the delete function.
RECORDING