2.1Preliminary Operations
* Check that the included power supply connector is correctly inserted in the
AC Adaptor jack (see rear panel diagram in this manual).
* Check that the power supply plug is firmly inserted in the power socket
(220V/AC).
* Connect a MIDI cable (standard 5 pin DIN) from the MIDI OUT connector of
the RD-70 to the MIDI IN connector of an external sound source.
MIDI OUT
AC ADAPTOR
2.2Playing Back a Song
* Insert the floppy disk containing the song to be played in the disk drive,
making sure that it is not upside down or back to front.
* The display will show the number 01, which refers to the first song on the
disk.
* If the AUTOPLAY parameter (see 2.8 PLAYBACK) is in the ON position,
playback will be performed automatically. Otherwise, press the PLAY button.
* You can pause playback of the song by pressing the PAUSE button.
* You can stop playback and go back to the beginning of the song by pressing
STOP.
5 pin DIN MIDI CABLE
220V/AC
PLAYBACK
MIDI IN
RIPRODU IONE
MIDI OUT
MIDI IN
REW
FF
STOP
PLAY
PAUSE
REC
PLAY
REW
FF
STOP
PLAY
PAUSE
REC
PAUSE
REW
FF
STOP
PLAY
PAUSE
REC
STOP