Time Base Selection; Active Sensing Function - Viscount RD-70 Quick Reference Manual

6.4TIME BASE Selection

* This function determines the resolution to be used to record incoming MIDI
messages.
* The RD-70 TIME BASE is usually set to 96, but a value of 240 can be selected
if desired.
* The following table indicates the compatibility of the two values in relation
to the resolution of the songs to be recorded: :
RD-70
192
240
* To set the TIME BASE, proceed as follows:
1) While holding ENTER, press REC (the current value will be displayed).
2) Change the value using REW and FF.
3) Press ENTER to confirm.

6.5ACTIVE SENSING Function

* This MIDI message enables the units forming the system to "sense
connection" with one another.
* Although almost all modern instruments can handle these messages, some
older ones do not interpret the code correctly: in this case, it is advisable to
disable production of this message as follows:
1) While holding ENTER, press SONG > (current status of the function will be
displayed - ON/OFF).
2) Change the status by pressing REW or FF.
3) Press ENTER to confirm.
Other Units
24, 48, 96, 192, 384
30, 60, 120, 240, 480
MIDI