Creating Lists Of Songs (Song List Function) - Viscount Cantorum Trio Plus Reference Manual

Hide thumbs

Table Of Contents

Table of Contents

NOTES

When overdubbing tracks with changing tempo, it is impossible to rewind or Fast Forward while

recording. However, it can be done when paused.

Changing the BPM value is only useful during the recording phase, the MIDI sequence will still be saved

with the original BPM.

To stop and quit the recording press [EXIT], the system will ask you to accept the overdubbing. You can choose

one of the following options:

Accept: accept the overdubbing. In case the overdub track is shorter than the

original piece, it will not be shortened.

Trim and Accept: accept the overdubbing. If the overdub track is shorther

than the original piece, this will be trimmed to end together with the

overdubbing.

Play: play the piece with the overdubbing, so as to assess the track. The

changes will not be saved yet.

Play from last Ovd (overdub): plays the piece, starting from the first event of

last overdubbing, so as to assess the track. The changes will not be saved

yet.

Discard: discards the overdubbing.

Selecting ACCEPT or TRIM AND ACCEPT the saving screen will be displayed. Now it is possible to save the

song with a different name.

Selecting PLAY or PLAY FROM LAST OVD will activate the sequencer play mode.

Press [EXIT] to quit the screen. The display will show the message "DISCARD SEQUENCE TAKE?", warning you

that the overdubbing will be lost. Press [MENU/ENTER] to continue – and therefore discard the recording – or

[EXIT] to return to the previous screen.

Creating lists of songs (SONG LIST function)

The function SONG LIST is used to create and save lists of music pieces (MIDI files).

To program a list of songs, select the SONG LIST function inthe SEQUENCER menu; the system asks whether

you wish to create a new one or modify an existing one.

Select the [NEW LIST] field to create a new list, or select an .LST file to modify the list it contains.

In both cases, to create / edit a list follow this procedure:

1. the first operation is to select the song you wish to include in the list. Use the

[ ] and [ ] buttons to select the MIDI file, [+] to add it to the list and [-] to

remove it. Its position within the list appears beside the name of the file.

2. now press [MENU/ENTER] to continue the programming or [EXIT] to abort, in

this case the system requests a confirm to proceed with the quit showing the

message "DISCARD SONG LIST?".

Playing and recording of musical sequences (Sequencer)