Scanning In Hands-Free Mode - Motorola Symbol DS6708 Product Reference Manual

2 - 6 Symbol DS6708 Digital Scanner Product Reference Guide

Scanning in Hands-Free Mode

The optional Intellistand adds greater flexibility to scanning operation. When the digital scanner is seated in the
stand's "cup," the digital scanner's built-in sensor places the digital scanner in hands-free mode. When the digital
scanner is removed from the stand it operates in its normal hand-held mode.
Scanner
Holder (Cup)
Inserting the Digital Scanner in the Intellistand
Figure 2-13
To operate the digital scanner in the IntelliStand:
Ensure the digital scanner is properly connected to the host (see the appropriate host chapter for information
1.
on host connections).
Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand's "cup" (see
2.
Figure 2-13).
Use the Intellistand's adjustment knobs to adjust the height and angle of the digital scanner.
3.
Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
4.
Upon successful decode, the digital scanner beeps and the LED turns green. For more information on beeper
5.
and LED definitions, see
Angle Adjustment Knob
Height Adjustment Knob
Table 2-1 and Table 2-2.