Bluetooth - Panasonic SC-MAX670 Owner's Manual

Bluetooth

®
You can connect and play an audio device wirelessly
through Bluetooth ® .
• Refer to the operating instructions of the Bluetooth
device for details.
• If you intend to use an NFC (Near Field
Communication)-compatible Bluetooth
proceed to "One-Touch Connection (Connecting by
NFC)".
• Decrease the volume before connect the Bluetooth
device.
Pairing a device
Preparation
®
• Turn on the Bluetooth feature of the device and place
the device near this unit.
1
Press and hold [ -PAIRING] on main unit.
2
Select "SC-MAX670" from the Bluetooth
of the device.
The device connects with this system automatically
after pairing is complete.
3
Start playback on the Bluetooth
For other operations on main unit, refer to "Playing disc".
Note:
• You can also operate with the remote control.
1 Press [ ] to select "BLUETOOTH".
2 Press [PLAY MENU] to select "PAIRING".
3 Press [2, 1] to select "OK? YES" and then press [OK].
4 Select "SC-MAX670" from the Bluetooth
device.
• If prompted for a passkey, input "0000".
• A device must be paired to connect.
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
• This system can only connect to one device at a time.
• When "BLUETOOTH" is selected as the source, this
10 system will automatically try and connect to the last
connected device.
One-Touch Connection
(Connecting by NFC)
For NFC-compatible Android
®
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
unit, you can complete all preparations, from registering
® device,
a Bluetooth ® device to establishing a connection.
Preparation
• Turn on the NFC feature of the device.
®
• Android device version lower than 4.1 requires the
installation of the app "Panasonic MAX Juke" (Free of
charge).
1 Enter "Panasonic MAX Juke" in the search box of
Google Play
"Panasonic MAX Juke".
2 Start the app "Panasonic MAX Juke" on the device.
- Follow on-screen instructions on your device.
- Always use the latest version of the app.
1
Touch and hold your device on the NFC touch
® menu
area of this unit [
® device.
• Once the registration and connection of the
Bluetooth
® menu of the
connected device is indicated on the display. Move
the device away from the unit.
• When the connection is not established even if
your device has touched the NFC touch area,
change its touching position."
2
Start playback on the Bluetooth
TM
devices only
®
device by the
TM to search, and then select
].
Bluetooth ® device
® device is complete, the name of the
® device.
Note:
• If you touch another device to this unit, you can update the
Bluetooth ® connection. The previously connected device
will be disconnected automatically.
• If the image and sound are out of sync during playback,
restart the playback app you are using. If the problem
persists, connect the Bluetooth ® device and this unit with
an audio cable (not supplied).
• When the connection is established, the playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth ® standby mode
If you enable this function, even when the main unit is
turned off, it will turn on automatically when a Bluetooth
device sends a connection request.
1
Press [ ] (main unit: [ -PAIRING]) to select
"BLUETOOTH".
2
Press [PLAY MENU] to select "STANDBY
MODE".
3
Press [2, 1] to select "ON STANDBY MODE" or
"OFF STANDBY MODE" and then press [OK].
Viewing available information
You can view the following information on the display
panel:
• Name of the connected device (maximum
16 characters).
• Bluetooth ® profile used.
Press [DISPLAY].
®