Usb; Radio - Panasonic SC-MAX670 Owner's Manual

USB

You can connect and play music tracks from your USB
device.
Connecting a USB device
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The system cannot
recognize USB device connected through a cable.
ILLUMINATION
A
B
USB status indicator
USB device
(not supplied)
Decrease the volume and connect the USB device to
the USB port.
Hold the main unit when connecting or disconnecting the
USB device.
Note:
USB status indicator lights up when selected.
Playback
1
Press [USB] to select "USB B" or "USB A".
2
Press [1/;] to start playback.
• Stop playback
Press [∫]. "RESUME" is shown.
Press [1/;] to continue playback.
OR
Press [∫] two times to stop the playback fully.
For other operations, refer to "Disc".
Viewing available information
You can view the available information on the display
panel.
Press [DISPLAY].

Radio

Manual tuning
1
Press [RADIO/EXT-IN] to select "FM".
2
Press [6] or [5] to select the frequency of
the required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
"STEREO" is shown when a stereo broadcast is
being received.
Using the main unit
1
Press [RADIO/EXT-IN] to select "FM".
2
Press [TUNE MODE] to select "MANUAL".
3
Press [:/6] or [5/9] to select the
frequency of the required station.
Improving the sound quality
In situations where the station's signal is weak, sound quality
may be improved by manually selecting Mono reception.
1
Press [PLAY MENU] to select "FM MODE".
2
Press [2, 1] to select "MONO" and then press [OK].
To cancel, select "STEREO".
"MONO" is also canceled when you change the
frequency.
Memory presetting
30 FM stations can be preset.
Automatic presetting
1
Press [OK] to select "LOWEST" or "CURRENT"
frequency.
2
Press [PLAY MENU] to select "A.PRESET" and
then press [OK].
"START?" is shown.
3
Press [OK] to start presetting.
To cancel, press [∫].
Manual presetting
1
Press [6] or [5] to tune in to the station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select "PRESET".
2
Press [:/6] or [5/9] to select the preset
station.
9