Disc - Panasonic SC-MAX670 Owner's Manual

Disc

Playing disc
1
Press [ OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [ OPEN/CLOSE] again to close the disc tray.
2
Press [CD] and then press [1/;] to start
playback.
• Stop playback
Press [∫].
• Pause playback
Press [1/;].
Press again to continue playback.
• Skip album
Press [3, 4].
• Skip track
Press [:] or [9]
(main unit: [:/6] or [5/9]).
• Search through track
Press and hold [6] or [5]
(main unit: [:/6] or [5/9]).
Viewing available information
You can view the available information on the display
panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown:
approximately 32
• This system supports ver. 1.0, ver. 1.1 and ver. 2 ID3 tags.
• Text data that the system does not support can show
differently.
8
Play menu
1
Press [PLAY MENU] to select "PLAYMODE" or
"REPEAT".
2
Press [2, 1] and then press [OK] to select the
desired mode.
PLAYMODE
• OFF PLAYMODE
Play all tracks.
• 1-TRACK
Play one selected track on the disc.
Press the numeric buttons to select the track.
• 1-ALBUM
Play one selected album on the disc.
Press [3, 4] to select the album.
• RANDOM
Play a disc randomly.
• 1-ALBUM RANDOM
Play all tracks in one selected album randomly.
Press [3, 4] to select the album.
REPEAT
• ON REPEAT
Repeat playback.
"`" appears.
• OFF REPEAT
Cancel repeat playback.
Note:
The setting returns to the default "OFF PLAYMODE" when
you open the disc tray.
Program playback
This function allows you to program up to 24 tracks.
1
Press [PROGRAM] in the stop mode.
"PGM" or "PROGRAM" is shown.
2
Press the numeric buttons to select the desired
track.
Do this step again to program other tracks.
1 Press [3, 4] to select the desired album.
2 Press [9] and then press the numeric buttons to
select the desired track.
3 Press [OK].
Do these steps again to program other tracks.
3
Press [1/;] to start playback.
• Cancel program mode
Press [PROGRAM] in the stop mode.
• Check program contents
Press [:] or [9] when "PGM" is shown in the stop
mode.
• Clear the last track
Press [DEL] in the stop mode.
• Clear all programmed tracks
Press [∫] in the stop mode.
"CLR ALL" is shown.
Within 5 seconds, press [∫] again.
Note:
• You cannot use program playback together with "PLAYMODE"
function.
• The program memory is cleared when you open the disc tray.
Note on disc
• This system can play CD-R/RW with CD-DA or MP3 format content.
• Some CD-R/RW cannot be played because of the condition of
the recording.
• MP3 files are defined as tracks and folders are defined as albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
• Recordings will not necessarily be played in the order you
recorded them.