Table of Contents
Advertisement
1 Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Numeric buttons [1 to 9, 0, S10]
• To select a 2-digit number
>
>
Example: 16: [S10]
[1]
[6]
• To select a 3-digit number
>
>
Example: 124: [S10]
[S10]
3 Delete a programed track
4 Select audio source
On the remote control
[
]: "BLUETOOTH"
(.
[CD/USB]: "CD"
"USB"*
1
------.
[RADIO, EXT-IN]: "FM"
"AUX"
^---
(b
"PC"
On the main unit
[SELECTOR]:
----------.
------------.
"CD"
"BLUETOOTH"
^-----
(---
(---
"PC"
"USB"*
1
5 Basic playback control
6 Select the sound effects
7 Set the play menu item
8 View content information
9 Clock and timer operation
10 Set the program function
11 Adjust the volume of the system
12 Mute the sound of the system
Press the button again to cancel.
"MUTE" is also canceled when you adjust the volume
or when you switch off the system.
13 Enter setup menu
14 Set the radio menu item
15 Select the option
16 Dim the display panel
Press the button again to cancel.
17 Display panel
18 Port for iPhone/iPad/iPod and USB devices
19 Bluetooth
• Press to select "BLUETOOTH" as the audio source.
• Press and hold to enter pairing mode ( 6) or
disconnect a Bluetooth
20 Open or close the disc tray
>
>
[1]
[2]
[4]
21 Headphones jack ( )
• Plug type: 3.5 mm (
• Avoid listening for prolonged periods of time to prevent
hearing damage.
• Excessive sound pressure from earphones and
headphones can cause hearing loss.
• Listening at full volume for long periods may damage
the user's ears.
22 Disc tray
• Do not put any object in front of the disc tray.
23 Remote control sensor
"FM"
(-b
"AUX"
*1: The display will automatically change to "IPOD" when a
compatible iPhone/iPad/iPod is connected to the port for
iPhone/iPad/iPod.
®
-pairing button
device ( 6).
®
/
q) stereo (not supplied)
1
8
About Bluetooth
®
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
Frequency band used
• This system uses the 2.4 GHz frequency band.
Certification of this device
• This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some
countries:
- Taking apart or modifying this system.
- Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
• This system supports Bluetooth
®
security features. But
depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
device.
Range of use
• Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this system is located too close to
other Bluetooth
devices or the devices that use the
®
2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
®
®
5
Advertisement
Table of Contents
