you need is a MicroSD or MicroSDHC memory card. The card may contain other data such as photos from
1. Access the „plug & play" section of the Audiotec
website. Select
2. Transfer
the downloaded setting onto your
MicroSD card. You'll need less than 200 kB of
free memory space. Make sure there's only one
Note:
for operating software updates.
3. Finally, insert the card into the MicroSD slot
of the PP50 DSP. The status LED will blink red
and saved in the PP50 DSP. The status LED
If you're updating the operating software or adju-
LED will show green.
20
-
MicroSD card
MicroSD-Slot PP50 DSP