Table of Contents
Advertisement
4.4 How to Scan
1.
Adjust the Guiding tab to the appropriate spot in accordance to the size of the document
2.
Smooth the edge of the document(s) before scanning.
3.
Insert the document gently into the slot and the scanner will automatically start scanning.
During scanning, the scanning status icon will be displayed on the LCD screen to indicate scanning is in
progress.
4.
If the scanner is connected to the computer, press the
to view the scanned files on the computer.
Notes:
When scanning and connected to an external power, the scanner will enter
charging mode if no scanning action is detected within 1 minute.
If "Scan error" icon appears on the LCD screen, original memory card needs to be
replaced with a higher call microSD card (Class 6 or above is recommended). The
error image will still be saved after the scan completes.
once to enter USB mode, then you are able
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Magic InstaScan PRO PDSWF-ST48-VP and is the answer not in the manual?
Questions and answers
After inserting a brand new MicroSD card, the unit states "full" in the screen and will not allow any photos to be scanned.
The VuPoint Magic InstaScan PRO PDSWF-ST48-VP may show "full" after inserting a new microSD card because the card has not been formatted properly. The solution is to format the microSD card by following the instructions in section 4.7 of the user manual.
This answer is automatically generated
Is this scanner portable or does it have to be plugged into a power source.?
The VuPoint Magic InstaScan PRO PDSWF-ST48-VP scanner is portable. It has a built-in battery that can be charged using a USB cable connected to a computer or an AC/DC power adapter.
This answer is automatically generated