Connecting To The Scanner Via Wi-Fi; View Files From An Internet Via Wi-Fi - VuPoint Magic InstaScan PRO PDSWF-ST48-VP User Manual


Calibration cannot be performed while using Wi-Fi®.
7.2 Connecting to the Scanner via Wi-Fi®
1. Turn on the Wi-Fi® by pressing and holding
2. Go to the network setting on the computer/smart device and turn on the Wi-Fi®
3. When "Ready" indication is displayed on the scanner's screen, search for the
"WIFISCAN" network in the computer/smart device setting
4. Enter "123456789" as the password to connect to the scanner
5. "Connected" will be display on the scanner's screen once Wi-Fi® is connected on
the device.
6. Open an Internet browser and enter "192.168.1.2" or "wifi.scan/" in the address bar to enter the
navigation page.
In the navigation page, all the scanned images will be shown on the browser in thumbnails. You can view and
delete files stored in the scanner or change the scanner Wi-Fi® settings.
Note: If a new Wi-Fi® password is forgotten, it can be reset by using the Reset Wi-Fi® option in the Scanner
settings. Refer to section 6.4
View files from an Internet Browser via Wi-Fi®
Click the "View" button to preview a single file.
Note: If a JPG format file exceeds 4MB, a notification "Image is too large" will be presented
and the file cannot be previewed.
Delete files from Internet Browser via Wi-Fi®
Delete your selected files.
1. Click the "Delete" icon and a "Selected File(s)" window will appear.
button.
13