Table of Contents
Advertisement
8. Specifications
Image sensor
Resolution
Minimum scanning speed for
Letter size document
Capacity (Based on 1GB
microSD card. Scan Letter
size file, the quantity of scans
varies depending on the
content complexity)
Scanner photo size
Scan width
Scan length
File format
LCD
Zoom
Dimensions (L×H×W)
Auto power off
Wi-Fi®
USB port
External memory
Standard battery
Battery charge time
9. Minimum System Requirements
Operating System
CPU
RAM
Interface
Color High resolution
Mono High resolution
Color Medium resolution
Mono Medium resolution
Color Low resolution
Mono Low resolution
Color High resolution
Mono High resolution
Color Medium resolution
Mono Medium resolution
Color Low resolution
Mono Low resolution
Windows® XP, Windows® Vista™, Windows® 7, Windows® 8, and Mac OS® 10.5 or
above (direct plug-in, driver installation not required)
Pentium III or above
At least 256MB
USB port
Color Contact Image Sensor
Low resolution : 300x300 dpi
Medium resolution: 600x600 dpi
High resolution: 1200x1200 dpi
A4、A5、5R、4R、3R and smaller
300DPI:130"(max);600DPI:60";(max);1200DPI:55"(max)
Approx 1.5" Class* TFT LCD
11.0"×1.5"×1.8"
802.11 b/g/n
USB 2.0 high speed
microSD/microSDHC card
Built-in 1200mAH Lithium-Polymer
Approx. 1.5 hours
16
10.0 Seconds
8.0 Seconds
5.0 Seconds
4.0 Seconds
5.0 Seconds
4.0 Seconds
200 Scans (Min.)
210 Scans (Min.)
600 Scans (Min.)
620 Scans (Min.)
1600 Scans (Min.)
1650 Scans (Min.)
Approx. 8.5"
JPEG/PDF
4x, 8x
3 Minutes
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Magic InstaScan PRO PDSWF-ST48-VP and is the answer not in the manual?
Questions and answers
After inserting a brand new MicroSD card, the unit states "full" in the screen and will not allow any photos to be scanned.
The VuPoint Magic InstaScan PRO PDSWF-ST48-VP may show "full" after inserting a new microSD card because the card has not been formatted properly. The solution is to format the microSD card by following the instructions in section 4.7 of the user manual.
This answer is automatically generated
Is this scanner portable or does it have to be plugged into a power source.?
The VuPoint Magic InstaScan PRO PDSWF-ST48-VP scanner is portable. It has a built-in battery that can be charged using a USB cable connected to a computer or an AC/DC power adapter.
This answer is automatically generated