Page 7
Fitting the hose, Fitting the air seperator 231844 Page 7 of 24 (A10)
Page 8
Moving the machine. 231844 Page 8 of 24 (A10)
Page 9
Changing the bag, cleaning the filter (REF Page 15) 231844 Page 9 of 24 (A10)
Page 10
Low Flow Indicator This appliance is fitted with a low flow indicator to show that air flow has reduced. In the event of the indicator light flashing, check the following:- Cause Solution Dust caps still fitted Remove the caps. Blocked hose Unblock the hose.
Page 11
Changing the cable. 231844 Page 11 of 24 (A10)
Page 12
About the machine Rating Label Vacuum cleaner, accessories and Company Name packaging should be sorted for & Address environmental-friendly recycling. Machine Description Only for EU countries: Do not dispose of Vacuum cleaner into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation Voltage / Frequency...
Page 13
● Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualified person using the correct Numatic original part. ● Change dust bag frequently. ● Keep diffuser filter (where fitted) clean.
Only use the dust collection bag (NVM-4B) once. This machine must only be repaired by suitably trained and authorised personnel. Only use genuine Numatic International Ltd spare parts, for repairs. This machine must not be installed as a fixed extraction system or run unattended.
Regularly examine the supply cord for damage, such as cracking or ageing. If damage is found, replace the cord before further use. All parts of this vacuum are safety critical only replace with the genuine Numatic spare parts. For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to maintenance staff and others.
Page 16
If seals have been damaged, please contact the machine manufacturer to obtain an approved replacement part. DATA Model Motor Airflow Suction Capacity Weight Size Cleaning Range HZQ 190 1200W 42 L/sec = 151 m 2500mm 10Kg 340x340x400 26.8m HZQ 200 1200W 42 L/sec = 151 m 2500mm 10.1Kg 355x355x520 26.8m...
Machine Description: Vacuum cleaner Type: HZQ, HZDQ series Manufactured by: Numatic International Limited This equipment has been designed and manufactured in accordance with the following harmonised European standards: IEC 60335-1 2001 + A1 2004 + A2 2006 + National Deviations IEC 60335- 2-2 2002 + A1 +A2 IEC 60335-2.69 2002 + A2 (including Annex AA)