Related Manuals for Numatic HZ 570S
Summary of Contents for Numatic HZ 570S
- Page 1 Owner Instructions Original Instructions Warning! Read instructions before using the machine HZ 570S / HZ 570D HZ 750S / HZ 750D HZ 900S / HZ 900D www.numatic.com...
- Page 2 HZ Kits 32 mm 902243 AA19 (570 Type) 902244 AA20 (750 / 900 Type) HZD Kits 38mm 607349 BB19 (570 Type) 607350 BB20 (750 / 900 Type)
- Page 3 900 Handle Assembly...
- Page 4 Fitting the Hose, Fitting the Air Seperator...
-
Page 5: Moving The Machine
Moving the Machine... -
Page 6: Warning Light
Warning Light Low Flow Indicator Slow Repeated Flash This indicates that your filter bag has become full. Please change the bag. If the fault persists check the following:- Cause Solution Dust caps still fitted Remove the caps. Blocked hose Unblock the hose. Bag full Remove and replace Cloth filter clogged... - Page 7 HZ 570, HZ 750, HZ 900 Auxiliary Power Socket Simplex type 2000W Maximum Output Load Duplex type 1000W Maximum Output Load The operating switch controls the vacuum motor. The auxiliary socket to the rear of the machine is a per- manent live source of power for your secondary appliance.
- Page 8 Changing the Bag, Cleaning the Filter...
-
Page 9: Changing The Cable
Changing the cable... -
Page 10: Rating Label
About the Machine Rating Label Company Name & Address Safety Critical Components Machine Description Voltage Frequency Mains Lead Power rating HO5VV-F 10m x 3 x 1.5 mm² Weight (ready to use) IPX Rating Dust Class WEEE Logo 604125 Filter for H CE Mark Cartridge machines... - Page 11 Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualified person. Only replace the power cord with the correct Numatic approved replacement part. DON’T: Pull on the cable to unplug the machine from the power supply.
-
Page 12: Important User Information
Only use the dust collection bag once. This machine must only be repaired by suitably trained and authorised personnel. Only use genuine Numatic International Ltd spare parts, for repairs. This machine must not be installed as a fixed extraction system or run unattended. - Page 13 If damage is found, replace the cord before further use. All parts of this vacuum are safety critical only replace with the genuine Numatic spare parts. For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reason- ably practicable, without causing risk to maintenance staff and others.
- Page 14 Replacing HEPA filters process: Unclip the top two toggle clamps, removing the security split pins in advance. Remove the Head assembly and place in a safe area. Unclip the lower two toggle clamps and remove the Interceptor assembly from the drum assembly, and place the Interceptor on a good level working surface.
-
Page 15: Spare Parts
Cartridge Fuse 604125 Filter for H machines Sundries 629445 Roll of 10 white bags 604151 Air Diffuser Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268... - Page 16 Data Variant Simplex Duplex HZ 570S, HZ 750S, HZ 900S HZ 570D, HZ 750D, HZ 900D Model Classification TYPE H TYPE H Voltage 230V 230V Frequency 50 - 60Hz 50 - 60Hz 1200W MAX 2400W MAX Power rating 1000 IEC...
-
Page 18: Eu Declaration Of Conformity
RoHS Directive 2011/65/EU Machine Description: Vacuum Cleaner Type: HZ, MDS, HZD, MDD series Manufactured by: Numatic International Limited Relevant standards upon which conformity is declared include: IEC 60335-1 2001 + A1 2004 + A2 2006 + National Deviations IEC 60335- 2-2 2002 + A1 +A2 IEC 60335-2.69 2002 + A2 (including Annex AA) - Page 20 Distributed by Numatic International Limited, Chard, Somerset, TA20 2GB ENGLAND Telephone: 01460 68600 Fax: 01460 68458 Specification subject to change without prior notice. www. numatic.co.uk © Numatic International Limited 244144 11/15 (A08)