Page 1
Make sure that the filtration system fitted to the machine is suitable for the material being collected. HZ 390L-2 HZ 390S-2 HZ 370-2 Owner Instructions CAUTION Read the Instructions before using the machine. HZ 370-2 / HZ 390S-2 / HZ 390L-2 (Kit AA18) www.numatic.co.uk...
Page 5
Changing the bag, cleaning the filter Remove the cloth filter (A) from the drum. Remove the HEPAFLO dust bag and seal the dust bag hole. Place the dust bag inside an impervious plastic bag and seal the bag. Dispose of the plastic bag, depending on contamination, in an appropriate manner.
Replacing the Cartridge Filter 901649 H13 Filter Cartridge...
Page 8
Low Flow Warning Light Lo - Flo Indicator. This appliance is fitted with a low flow indicator to show that air flow has reduced. In the event of the indicator light flashing, check the following:- Cause Solution Dust caps still fitted Remove the caps.
Protection NOTE: A risk assessment should be conducted to determine which PPE should be worn. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268 Safety Critical Components H05VV-F 10m x 3 x 1.0mm²...
Page 11
Replace any worn or damaged parts immediately. • Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualifi ed person using the correct Numatic original part. • Change dust bag frequently.
Page 12
Only use the dust collection bag (NVM-2BH) once. This machine must only be repaired by suitably trained and authorised personnel. Only use genuine Numatic International Ltd spare parts, for repairs. This machine must not be installed as a fi xed extraction system or run unattended.
Regularly examine the supply cord for damage, such as cracking or ageing. If damage is found, replace the cord before further use. All parts of this vacuum are safety critical only replace with the genuine Numatic spare parts. For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to maintenance staff and others.
Sound Pressure (LpA) Cleaning Weight Protection Drum Size Dimensions Range (Ready to work) Class Uncertainty (KpA) HZ 370-2 15 L 11.0 kg 68.0 dB (A) Class I 355 mm x 355 mm x 570mm HZ 390S-2 18 L 26.0 m 11.2 kg 0.5 dB...
Page 16
Tel: 0861 686 284 www.numatic.co.za Numatic International Schweiz AG. Sihlbruggstrasse 3A, 6340 Baar. SCHWEIZ Tel: 0041 (0) 41 76 80 76 - 0 www.numatic.ch Numatic International ULDA. Rua da Boa Viagem, 177 4470.210 Maia. PORTUGAL Tel: +351 220 047 700 www.numatic.pt Numatic International SLU.
Need help?
Do you have a question about the HZ 370-2 and is the answer not in the manual?
Questions and answers