Tycon Power Systems TP2700WC Operation Manual page 43

This section is used to set up PC software display and Base
Station unit of measure, time zone and other settings. Once you
made your choice, press Save to make the settings effective.
4.1.2 Select Alarm to enter the Alarm page
This section is used to set the desired time alarm, high or low
alarm values for the Base Station, as well as enable or disable the
corresponding alarm functions. Once you made your choice,
choose Save to make the setting effective. If you don't want to
make any change, just press Cancel and exit without change.
4.1.3 Max / Min Data
Select Max / Min Day to open the Max / Min Day page
8000040 Rev 3
43