Tycon Power Systems TP2700WC Operation Manual page 24

In normal mode, press ALARM key you will enter high alarm
mode, press ALARM key again and you will switch to low alarm
mode.

HIGH ALARM SETTING
Press Left/Right key to transfer among the different segments and
press +/- key to adjust the value of the high alarm.
TIME ALARM – Set time alarm
a)
LIGHT HIGH ALARM – Set light high alarm
b)
UVI HIGH ALARM – Set UVI high alarm
c)
In TEMP HIGH ALARM – Set indoor temperature high
d)
alarm
In HUMI HIGH ALARM – Set indoor humidity high alarm
e)
Out TEMP HIGH ALARM – Set outdoor temperature high
f)
alarm
Out HUMI HIGH ALARM – Set outdoor humidity high alarm
g)
ABS BARO HIGH ALARM – Set absolute barometric
h)
pressure high alarm
REL BARO HIGH ALARM – Set relative barometric
i)
pressure high alarm
WIND HIGH ALARM – Set wind speed high alarm
j)
GUST HIGH ALARM – Set gust speed high alarm
k)
DEW POINT HIGH ALARM – Set dew point high alarm
l)
m) HEAT INDEX HIGH ALARM – Set heat index high alarm
RAIN RATE HIGH ALARM – Set rainfall rate high alarm
n)
RAIN DAY HIGH ALARM – Set rainfall day high alarm
o)

LOW ALARM SETTING
In TEMP LOW ALARM – Set indoor temperature low alarm
a)
In HUMI LOW ALARM – Set indoor humidity low alarm
b)
24
8000040 Rev 3