Tycon Power Systems TP2700WC Operation Manual page 15

Base Station / Display Console Operation
Program mode
The screen is divided into 10 segments for selection and there is
a message display panel on the bottom.
There are six program modes: normal, setting mode, history
mode, alarm mode, max/min mode and calibrated mode. All the
modes can be exited at any time by pressing the HISTORY key, or
waiting for a 30 second timeout to take effect.
Normally, if the segment selected has multiple parts, press SET
key to choose a different part. Example: the current section is
RAIN, you can press SET key to select among RAIN RATE, RAIN
EVENT, DAY, WEEK, MONTH, YEAR and TOTAL.
1. Quick Display Mode (Updates every 5 Seconds)
In the normal mode and once a segment is selected (Different
segments can be chosen by pressing" Left " or " Right" key. The
default selected segment is time and date), there will be different
messages that show on the message panel. If any alarms
occurred, the alarm information will be displayed in real time as
well. The messages will rotate automatically or you can transfer
between messages manually by pressing "+" or "-" button.
8000040 Rev 3
15