1. Manuals
  2. Brands
  3. KLING & FREITAG Manuals
  4. Speaker System
  5. SEQUENZA 5
  6. User manual

KLING & FREITAG SEQUENZA 5 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
K&F SEQUENZA 5 incl. accessories
Version 4.1
User's Manual
Released: 01.07.2015
Important Information,
Please Read Before Use!
KLING & FREITAG GmbH
Junkersstraße 14
D-30179 Hannover
TEL +49 (0) 511 96 99 70
FAX +49 (0) 511 67 37 94
www.kling-freitag.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEQUENZA 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KLING & FREITAG SEQUENZA 5

Summary of Contents for KLING & FREITAG SEQUENZA 5

  • Page 1 K&F SEQUENZA 5 incl. accessories Version 4.1 User's Manual Released: 01.07.2015 Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße 14 D-30179 Hannover TEL +49 (0) 511 96 99 70 FAX +49 (0) 511 67 37 94 www.kling-freitag.de...

  • Page 3: Table Of Contents

    Scope of Delivery Scope of Delivery SEQUENZA 5 W Scope of Delivery SEQUENZA 5 B Scope of Delivery SEQUENZA 5 Flying Frame Scope of Delivery SEQUENZA 5 VariMount Adapter Scope of Delivery SEQUENZA 5 Downfill Adapter Scope of Delivery SEQUENZA 5 Transport Case...
  • Page 4 Installation of a Load Adapter 9.3.2.2 Installing the TV Spigot 9.3.3 Mounting SEQUENZA 5 B to SEQUENZA 5 Flying Frame, Flown 9.3.4 Mounting SEQUENZA 5 B to SEQUENZA 5 B 9.3.5 Mounting SEQUENZA 5 W to SEQUENZA 5 Flying Frame, Flown 9.3.6...
  • Page 5 Accessories 18.1 General Accessories for SEQUENZA 5 18.2 Accessories for SEQUENZA 5 W 18.3 Accessories for SEQUENZA 5 B 18.4 Acccessories for SEQUENZA 5 Flying Frame Disposal 19.1 Regulations for Disposal 19.1.1 Germany 19.1.2 EU, Norway, Iceland, and Liechtenstein 19.1.3...

  • Page 6: Introduction

    As the owner of a SEQUENZA 5 system, you now have a versatile and highly professional tool that will satisfy the full range of highest demands on sound quality.

  • Page 7: Scope Of Delivery

    Scope of Delivery SEQUENZA 5 Flying Frame • Flying frame for flying and stacking speakers SEQUENZA 5 W and SEQUENZA 5 B, incl. ball lock pin. • 1 x 3.25t shackle (for optional safety chain) •...

  • Page 8: Product Description

    User's manual K&F SEQUENZA 5 incl. accessories Product Description Overview SEQUENZA 5 W Parts speaker enclosure handle Rear connecting plates (with park position connector) Quick Release Pin spring bolt Joint bar (with bolt) Safety latch 'Safelock' Joint bar Connector KLING & FREITAG GMBH © 2015 Version 4.1...

  • Page 9: Overview Sequenza 5 B Parts

    User's manual K&F SEQUENZA 5 incl. accessories Overview SEQUENZA 5 B Parts Housing connector brackets Quick Release Pin Joint bar (with bolt) L connector Safety latch 'Safelock' Joint bar Transport cover KLING & FREITAG GMBH © 2015 Version 4.1 Page 9 of 88...

  • Page 10: Overview Components Sequenza 5 Flying Frame

    K&F SEQUENZA 5 incl. accessories Overview Components SEQUENZA 5 Flying Frame This flying frame was designed for flying or stacking KLING & FREITAG speakers SEQUENZA 5 W and SEQUENZA 5 B. SEQUENZA 5 flying frame TV spigot (in park position)

  • Page 11: Overview Components Sequenza 5 Transport Case

    User's manual K&F SEQUENZA 5 incl. accessories Overview Components SEQUENZA 5 Transport Case The SEQUENZA 5 transport case was specially designed for transporting three SEQUENZA 5 W speakers. Case cover Front cover Castor base KLING & FREITAG GMBH © 2015 Version 4.1...

  • Page 12: Overview Components Sequenza 5 Varimount Adapter

    User's manual K&F SEQUENZA 5 incl. accessories Overview Components SEQUENZA 5 VariMount Adapter The VariMount adapter was designed for stacking KLING & FREITAG speakers SEQUENZA 5 W on speaker stands. VariMount adapter Adapter clamp Vari connector Joint bar 'Stand adapter M10' with clamping screw TV spigot KLING &...

  • Page 13: Übersicht Bauteile Downfill Adapter Sequenza 10 To

    User's manual K&F SEQUENZA 5 incl. accessories Übersicht Bauteile Downfill Adapter SEQUENZA 10 to 5 This downfill adapter was designed for combining SEQUENZA 5 W with SEQUENZA 10 N/W speakers. Downfill adapter Joint bar SEQUENZA 10 Joint bar SEQ 5 Rear connector SEQUENZA 5 KLING &...

  • Page 14: System Requirements For Use

    User's manual K&F SEQUENZA 5 incl. accessories System Requirements for Use System Requirements K&F TOPAS-system amp Lab.gruppen IPD 2400 Lab.gruppen PLM+ K&F CD 44 Digital System Controller: LAB.GRUPPEN FP 10000Q: These components are referred to as 'K&F SystemRack'. Optional: Connector Panel CP 4: KLING &...

  • Page 15: Safety Instructions

    Der Flugrahmen darf ausschließlich für den professionellen Einsatz und nur zum Aufhängen, bzw. Aufstellen von KLING & FREITAG Lautsprechern der Typen SEQUENZA 5 W und SEQUENZA 5 B sowie in der hier beschriebenen Art und Weise verwendet werden.

  • Page 16: Safety Instructions For Stacked Setups

    If a BGV (government safety organisation) C1 or a D8+ motor is used, the SEQUENZA 5 system is intrinsically safe and does not require any secondary securing. If the SEQUENZA 5 system is, however, to be hung on another motor, then secondary securing is necessary.

  • Page 17: Wind Loading

    User's manual K&F SEQUENZA 5 incl. accessories For the stability inspection, you must always factor in an imperfection (tilt) of +/-15° and destabilising loads. A planned tilt of the flying frame ist not permissible. In calculations, the tilted setup serves the purpose of levelling out unevenness.
  • Page 18 User's manual K&F SEQUENZA 5 incl. accessories felt in walking against wind 17.2-20.7 Gale Twigs and small branches broken off trees For outdoor uses, we recommend using at least a BGV D8+ hoisting device to avoid wind causing the release of the secondary safety device.

  • Page 19: Preventing Hearing Damage

    Caution Protecting the Speakers / Operating Safety SEQUENZA 5 speakers may only be used in combination with a K&F SystemRack. In general, audio signals must not be overdriven. This may be caused by mixing consoles, equalizers, effect equipment, etc. and should be indicated on this equipment. When a power amplifier is overloaded at the output (clipping), then the amplifier activates a clipping warning signal.

  • Page 20: Opening The Transport Case

    K&F SEQUENZA 5 incl. accessories Opening the Transport Case In the SEQUENZA 5 transport case three SEQUENZA 5 W speakers are safely packed. When dismantling the speakers, you can leave them connected in any given tilt angle. You need not remove or loosen the rear connectors. This makes them easier to dismount and faster to disassemble.

  • Page 21: Safe Connecting And Disconnecting Of The Products

    The safety latch is always on the speaker. In general, all SEQUENZA 5 speakers can be safely connected to one another and with the SEQUENZA 5 adapters this way.
  • Page 22 User's manual K&F SEQUENZA 5 incl. accessories Place the speaker, flying frame or adapter onto a standing speaker so that the joint bars are next to one another. Ensure that the safety latch of the standing speaker is pushed into the enclosure by the joint bars of the adjoining device.
  • Page 23 User's manual K&F SEQUENZA 5 incl. accessories In general, all SEQUENZA 5 speakers and SEQUENZA 5 adapters can be safely disconnected this way. To avoid injury, it is forbidden to separate speakers from one another while they are still suspended or strapped.

  • Page 24: Sequenza 5 Setup

    9.1.1 Setup variations, flown If a BGV (government safety organisation) C1 or a D8+ motor is used, the SEQUENZA 5 system is intrinsically safe and does not require any secondary securing. If the SEQUENZA 5 system is, however, to be hung on another motor, then secondary securing is necessary. This can be attached to the 3.5t shackles and must be implemented with zero drop height.
  • Page 25 During setup, always make sure to use the correct connectors. When connecting the SEQUENZA 5 flying frame with a SEQUENZA 5 W speaker, you must always use the flying frame connector. Using a wrong connector or incorrectly installing a connector can result in certain tilt angles being impossible or the array tipping because of a shifted centre of gravity.
  • Page 26 • General Preparation • Preparing SEQUENZA 5 Flying Frame, Flown, page 30 • Mounting SEQUENZA 5 B to Flying Frame, page 35 • Mounting SEQUENZA 5 W to SEQUENZA 5 B, Flown, page 38 • Mounting SEQUENZA 5 W to...

  • Page 27: Mounting Variations, Stacked

    • Mounting SEQUENZA 5 W to SEQUENZA 5 Flying Frame, Stacked, page 53 • Mounting SEQUENZA 5 W to SEQUENZA 5 W, Flown, page 36 see following chapter: • General Preparation • Preparing SEQUENZA 5 Flying Frame, Flown, page 36 •...

  • Page 28: Mounting Variation: Stand

    You may only mount a maximum of three speakers on a stand. It is forbidden to mount a SEQUENZA 5 B speaker on a stand. Before setup, make sure that there is a stable and even surface and the stand has a sufficient Warning load capacity.
  • Page 29 User's manual K&F SEQUENZA 5 incl. accessories see following chapter: • General Preparation • Preparing the SEQUENZA 5 VariMount adapter and the speaker stand, page 59 • Mounting SEQUENZA 5 W to SEQUENZA 5 Flying Frame, Stacked, page 53 •...

  • Page 30: General Preparation

    9.3.2 SEQUENZA 5 Flying Frame Preparation, Flown Setup If a BGV (government safety organisation) C1 or a D8+ motor is used, the SEQUENZA 5 system is intrinsically safe and does not require any secondary securing. If the SEQUENZA 5 system is, however, to be hung on another motor, then secondary securing is necessary.
  • Page 31 User's manual K&F SEQUENZA 5 incl. accessories You can set the position of the load adapters in 1/2-steps because they are usable on both sides. In doing so, the number of drill holes in the flying frame and, thus, the adjustment possibilities, is doubled.

  • Page 32: Installation Of A Load Adapter

    User's manual K&F SEQUENZA 5 incl. accessories 9.3.2.1 Installation of a Load Adapter Take the load adapter (1) out of its park position and place it onto the drill hole on the flying frame, as determined by the simulation software CON:SEQUENZA+.

  • Page 33: Installing The Tv Spigot

    Always fasten the TV spigot with two ball lock pins. Keep in mind the safe maximum load for the TV spigot is limited to 116 kg (BGV C1 / Factor of Safety 10:1). (e.g. 6 SEQUENZA 5-tops) Warning KLING & FREITAG GMBH © 2015 Version 4.1...
  • Page 34 User's manual K&F SEQUENZA 5 incl. accessories Check the TV spigot (1) and the two ball lock pins (2) to make sure they are secured in place. KLING & FREITAG GMBH © 2015 Version 4.1 Page 34 of 88...

  • Page 35: Mounting Sequenza 5 B To Sequenza 5 Flying Frame, Flown

    K&F SEQUENZA 5 incl. accessories 9.3.3 Mounting SEQUENZA 5 B to SEQUENZA 5 Flying Frame, Flown Prepare the flying frame for flying mode. (see chap. 'Preparing the Sequenza 5 Flying Frame' on page 30) Connect the SEQUENZA 5 flying frame with the...

  • Page 36: Mounting Sequenza 5 B To Sequenza 5 B

    The speaker is now completely assembled and secured. If necessary, repeat the procedure for the next SEQUENZA 5 B speaker. If you don't want to mount any more speakers, then you can now wire the speakers.

  • Page 37: Mounting Sequenza 5 W To Sequenza 5 Flying Frame, Flown

    Prepare the flying frame for flying mode. (see chap. 'Preparing the SEQUENZA 5 Flying Frame, Flown' on page 30) Open the transport case of the SEQUENZA 5 W triple by turning the catches 180° and removing the lid. Connect the SEQUENZA 5...
  • Page 38 User's manual K&F SEQUENZA 5 incl. accessories Make sure you can see the red dot on the safety latch. Fasten the flying frame connector onto the flying frame with a ball lock pin. Fold the flying frame's connector (that was...

  • Page 39: Mounting Sequenza 5 W To Sequenza 5 B, Flown

    We recommend setting up a triple directly from a vertically standing transport case, as described in Chapter 'Mounting SEQUENZA 5 W to SEQUENZA 5 W, Flown' on page 40. If you also disassemble the speakers using a vertically standing transport case, you can be certain that the speakers are in the transport case the right way for the next assembly.

  • Page 40: Mounting Sequenza 5 W To Sequenza 5 W, Flown

    Detailed information for connecting the speakers and configuring the K&F system amplifier TOPAS or the K&F SystemRack is in the hardware manuals. 9.3.7 Mounting SEQUENZA 5 W to SEQUENZA 5 W, Flown When mounting a SEQUENZA 5 W speaker with another SEQUENZA 5 W speaker, you must use the provided connector on the speaker.
  • Page 41 User's manual K&F SEQUENZA 5 incl. accessories Vertical setup: Stand the transport case vertically and remove the lid. Insert the flying frame connector into the SEQUENZA 5 flying frame and secure it with a ball lock pin. The magnet fitted on the...
  • Page 42 K&F SEQUENZA 5 incl. accessories Release the flying frame connector from the magnet and fold it downwards between the connecting plates of the SEQUENZA 5 W speaker. Align the drill hole of the connector with the drill hole that has been determined for the calculated tilt angle.
  • Page 43 User's manual K&F SEQUENZA 5 incl. accessories Compare the drill hole to which the connector is attached with the print-out of the simulation. Correct the position if necessary: Pull the spring bolt outwards as far as it will go (release position), hold onto it, and fold the connector out.
  • Page 44 User's manual K&F SEQUENZA 5 incl. accessories Horizontal setup: Line up all required transport cases next to one another. You can completely set up all three speakers from one transport case without having to separate the speakers from one another.
  • Page 45 User's manual K&F SEQUENZA 5 incl. accessories Adjust every speaker to the tilt angle calculated by the simulation software: Align the drill hole of the connector with the drill hole that is marked with the desired angular degree. Fasten the connector with the ball lock pin.

  • Page 46: Mounting Sequenza 5 W And Sequenza 10 With Downfill Adapter

    TOPAS or the K&F SystemRack is in the hardware manuals. Read more in chapter 'Lifting the Array' on page 48. 9.3.8 Mounting SEQUENZA 5 W and SEQUENZA 10 with Downfill Adapter Using the downfill adapter, you may hang a maximum of three speakers under a SEQUENZA 10 N/W speaker.
  • Page 47 User's manual K&F SEQUENZA 5 incl. accessories Make sure you can see the red dot on the safety latch. Use a ball lock pin to fasten the connector of the adapter in the desired drill hole on the speaker. Lower the SEQUENZA 10 N/...

  • Page 48: Lifting The Array

    TOPAS or the K&F SystemRack is in the hardware manuals. Lifting the Array If a BGV (government safety organisation) C1 or a D8+ motor is used, the SEQUENZA 5 system is intrinsically safe and does not require any secondary securing. If the SEQUENZA 5 system is, however, to be hung on another motor, then secondary securing is necessary.
  • Page 49 User's manual K&F SEQUENZA 5 incl. accessories At a 0° position, the spring bolt should already click into place on the ground. When the ground is uneven, the spring bolts may not correctly click into place. To ensure that it has...

  • Page 50: Stacked Setup

    Make sure that the speaker cables do not get crimped or get caught. Stacked Setup SEQUENZA 5 W speakers may only be stacked on a flying frame, on a SEQUENZA 5 B speaker, or with a SEQUENZA 5 VariMount adapter on a stand. If a SEQUENZA 5 W speaker is to be mounted on a SEQUENZA 5 B speaker, a SEQUENZA 5 flying frame does not have to be mounted as a support.
  • Page 51 User's manual K&F SEQUENZA 5 incl. accessories 9.5.1 Preparing the Flying Frame To compensate for minimal ground unevenness, you can adjust the integrated rubber padded feet by a few centimetres. This prevents the mounted flying frame from sliding and/or causing damaging scratches to the floor.

  • Page 52: Mounting Sequenza 5 B To Sequenza 5 Flying Frame, Stacked

    User's manual K&F SEQUENZA 5 incl. accessories 9.5.2 Mounting SEQUENZA 5 B to SEQUENZA 5 Flying Frame, Stacked Connect the speaker with the flying frame as described in chapter 'Safe Connecting and Disconnecting of the Products' on page 21. If the array is set up on a stage edge and tilted downwards, then the SEQUENZA 5 B speakers must also be tilted accordingly.
  • Page 53 User's manual K&F SEQUENZA 5 incl. accessories During setup, be sure to use the long side of the L- bracket and the inner drill hole on the leg for a 5° downtilt. Align the L-bracket so that you can insert the ball lock pin.

  • Page 54: Mounting Sequenza 5 W To Sequenza 5 Flying Frame, Stacked

    User's manual K&F SEQUENZA 5 incl. accessories 9.5.3 Mounting SEQUENZA 5 W to SEQUENZA 5 Flying Frame, Stacked When mounting a SEQUENZA 5 W speaker with a SEQUENZA 5 flying frame, you must use the flying frame connector that is provided with the flying frame.

  • Page 55: Mounting Sequenza 5 B To Sequenza 5 B, Stacked

    K&F system amplifier TOPAS or the K&F SystemRack is in the hardware manuals. 9.5.4 Mounting SEQUENZA 5 B to SEQUENZA 5 B, Stacked To setup a SEQUENZA 5 B speaker with a further SEQUENZA 5 B speaker, you must use the L-bracket provided with the speaker.

  • Page 56: Mounting Sequenza 5 W To Sequenza 5 B, Stacked

    9.5.5 Mounting SEQUENZA 5 W to SEQUENZA 5 B, Stacked The setup for stacked use only differs from flown use in the alignment of the speakers. Please note that the speakers must be turned upside down for a stacked setup. In order to avoid detracting from the speakers' appearance, the logos should be turned by 180°...

  • Page 57: Mounting Sequenza 5 W To Sequenza 5 W, Stacked

    CON:SEQUENZA+. 9.5.6 Mounting SEQUENZA 5 W to SEQUENZA 5 W, Stacked For weight reasons, you may only lift, set up and mount max. one speaker. Caution Connect the SEQUENZA 5 W...
  • Page 58 User's manual K&F SEQUENZA 5 incl. accessories Make sure you can see the red dot on the safety latch. Position the lower speaker's spring bolt into its original starting position. (See chapter 'Using the Spring Bolt' on page 20) Using a further ball lock pin,...

  • Page 59: Mounting Sequenza 5 W To Sequenza 5 Varimount Adapter

    The VariMount adapter can be used for stand mounting as well as flown mounting. Flown mounting requires the TV spigot and the appropriate accessories. Please note that the SEQUENZA 5 VariMount adapter is designed for a maximum of three SEQUENZA 5 W speakers. Make sure that the stand is designed for the total weight.
  • Page 60 6a to 8a. • If you have mounted the SEQUENZA 5 VariMount adapter with the TV spigot because you want to hang the array with a pipe clamp, please read sections 6b bis 8b.
  • Page 61 Pipe clamp alternative: If your configuration provides for it, you can mount up to two further SEQUENZA 5 W speakers, as described in chapter 'Safe Connecting and Disconnecting of the Products' on page 21. KLING & FREITAG GMBH © 2015 Version 4.1...

  • Page 62: Disassembly

    User's manual K&F SEQUENZA 5 incl. accessories Place a pipe clamp onto the TV spigot. Lift the triple with an approved hoist and hang it from a suitable support. The speakers are now completely assembled and secured. You can now wire the speakers.

  • Page 63: Flown Disassembly

    User's manual K&F SEQUENZA 5 incl. accessories Completely remove the SEQUENZA 5 speaker cable split adapter out of the wiring. When the connection is relieved, loosen the spring bolt on the fourth speaker. Grasp to the right and left on the speaker's connecting joints and push the safety catch into the enclosure.

  • Page 64: Disassembling An Array

    K&F SEQUENZA 5 incl. accessories 10.1.1 Disassembling an Array Disassemble the array as described in the previous chapters. Prepare the SEQUENZA 5 system for transport: • Fold the connectors back into their parking position. • Dismantle all used components so that they do not protrude and cannot be damaged during transport.

  • Page 65: Disassambling The Stacked Array

    User's manual K&F SEQUENZA 5 incl. accessories 10.2 Disassambling the Stacked Array Basically, you disassemble the array in the reverse order of assembly. 11. Wiring The operating safety and the highest-possible performance is only guaranteed in conjunction with the K&F Topas or K&F SystemRack.

  • Page 66: Connecting The Sequenza 5 Speakers

    User's manual K&F SEQUENZA 5 incl. accessories 11.2 Connecting the SEQUENZA 5 Speakers Connecting arrays that only consist of SEQUENZA 5 W speakers: KLING & FREITAG GMBH © 2015 Version 4.1 Page 66 of 88...
  • Page 67 User's manual K&F SEQUENZA 5 incl. accessories Connecting SEQUENZA 5 W speakers with SEQUENZA 5 B speakers: KLING & FREITAG GMBH © 2015 Version 4.1 Page 67 of 88...

  • Page 68: Transport And Storage

    13.1 Inspection Intervals and Items The SEQUENZA 5 system can exhibit signs of wear over the years, i.e. from mechanical strain, transport damage, corrosion, or improper handling. In general, this always indicates an increased accident risk.

  • Page 69: Optional Bgv C1 Certification

    DIRECTIONS HAVE TO BE FOLLOWED STRICTLY! PWR: IMP: SER.-NO.: all pins parallel to out WT: 23,5 kg Seal of approval box on the SEQUENZA 5 'CON:SEQUENZA+' . ITS flying frame SAFETY DIRECTIONS HAVE TO BE FOLLOWEDE STRICTLY! ANGLE BETWEEN FRAME PWR:...

  • Page 70: Technical Specifications Of Loudspeakers

    User's manual K&F SEQUENZA 5 incl. accessories 15. Technical Specifications of Loudspeakers 15.1 Technical Specifications SEQUENZA 5 W Design 2-way passive system, bass reflex tuning (operation with K&F SystemRack or K&F TOPAS) Frequency range -10 dB 59 Hz - 22 kHz in 'FR mode' 74 Hz - 22 kHz in 'LCut mode' Frequency range ±3 dB...

  • Page 71: Technical Specifications Sequenza 5 B

    User's manual K&F SEQUENZA 5 incl. accessories 15.2 Technical Specifications SEQUENZA 5 B Design bass reflex tuning (operation via K&F SystemRack or K&F TOPAS) Frequency range -10 dB 36 Hz - 147 Hz Frequency range ±3 dB 40 Hz - 100 Hz...

  • Page 72: Measuring Diagrams

    User's manual K&F SEQUENZA 5 incl. accessories 16. Measuring Diagrams 16.1 SEQUENZA 5 W diagrams Horizontal coverage pattern Vertical coverage pattern KLING & FREITAG GMBH © 2015 Version 4.1 Page 72 of 88...
  • Page 73 User's manual K&F SEQUENZA 5 incl. accessories vertical coverage, 0 deg. tilt vertical coverage, 3 deg. tilt vertical coverage, 6 deg. tilt KLING & FREITAG GMBH © 2015 Version 4.1 Page 73 of 88...
  • Page 74 User's manual K&F SEQUENZA 5 incl. accessories vertical coverage, 9 deg. tilt vertical coverage, 12 deg. tilt vertical coverage, 15 deg. tilt KLING & FREITAG GMBH © 2015 Version 4.1 Page 74 of 88...
  • Page 75 User's manual K&F SEQUENZA 5 incl. accessories Frequency response 'on axis' Impedance max. SPL at 10% THD KLING & FREITAG GMBH © 2015 Version 4.1 Page 75 of 88...

  • Page 76: Dimensions Speaker

    User's manual K&F SEQUENZA 5 incl. accessories 17. Dimensions speaker 17.1 Dimensions SEQUENZA 5 W Weight: 16.3 kg R1130 KLING & FREITAG GMBH © 2015 Version 4.1 Page 76 of 88...

  • Page 77: Dimensions Sequenza 5 B

    User's manual K&F SEQUENZA 5 incl. accessories 17.2 Dimensions SEQUENZA 5 B Weight: 23.6 kg KLING & FREITAG GMBH © 2015 Version 4.1 Page 77 of 88...

  • Page 78: Dimensions Sequenza 5 Flying Frame

    User's manual K&F SEQUENZA 5 incl. accessories 17.3 Dimensions SEQUENZA 5 flying frame Weight: 17.4 kg KLING & FREITAG GMBH © 2015 Version 4.1 Page 78 of 88...

  • Page 79: Dimensions Sequenza 5 Transportation Case

    User's manual K&F SEQUENZA 5 incl. accessories 17.4 dimensions SEQUENZA 5 transportation case Weight: 36.5 kg KLING & FREITAG GMBH © 2015 Version 4.1 Page 79 of 88...

  • Page 80: Dimensions Sequenza 5 Varimount Adapter

    User's manual K&F SEQUENZA 5 incl. accessories 17.5 dimensions SEQUENZA 5 VariMount adapter Weight: 2.8 kg KLING & FREITAG GMBH © 2015 Version 4.1 Page 80 of 88...

  • Page 81: Dimensions Sequenza 5 Downfill Adapter

    User's manual K&F SEQUENZA 5 incl. accessories 17.6 Dimensions SEQUENZA 5 downfill adapter Weight: 3.0 kg KLING & FREITAG GMBH © 2015 Version 4.1 Page 81 of 88...

  • Page 82: Accessories

    Neutrik® NLT4FX Speaker Patch Cable NLT-425, 1 m 100 cm patch cable for connections between SEQUENZA 5 B elements, high- grade halogen-free cable, 4 conductors with 2.5 mm cross section each, water proof metal connectors Neutrik® NLT4FX KLING &...

  • Page 83: Accessories For Sequenza 5 W

    18.2 Accessories for SEQUENZA 5 W Downfill adapter SEQUENZA 10 to 5, downfill adapter for flown configurations of max. 3 SEQUENZA 5 W elements under SEQUENZA 10 N/W VariMount adapter SEQUENZA 5 W for stacking or suspending of 3 elements...

  • Page 84: Accessories For Sequenza 5 B

    User's manual K&F SEQUENZA 5 incl. accessories 18.3 Accessories for SEQUENZA 5 B Transport cover SEQUENZA 5 B Transport Cover SEQUENZA 5 B KLING & FREITAG GMBH © 2015 Version 4.1 Page 84 of 88...

  • Page 85: Acccessories For Sequenza 5 Flying Frame

    User's manual K&F SEQUENZA 5 incl. accessories 18.4 Acccessories for SEQUENZA 5 Flying Frame SEQUENZA 5 Flying frame outrigger for increased stability Rain protection SEQUENZA 5 rigging frame Rain protection while the speakers are in Colour: blac KLING & FREITAG GMBH © 2015 Version 4.1...

  • Page 86: Disposal

    User's manual K&F SEQUENZA 5 incl. accessories 19. Disposal 19.1 Regulations for Disposal 19.1.1 Germany It is not allowed to dispose of used electrical equipment as domestic waste. But please do not dispose of them at official collecting points for recycling either! All KLING &...

  • Page 87: Ec Declaration Of Conformity

    User's manual K&F SEQUENZA 5 incl. accessories 20. EC Declaration of Conformity for the products mentioned hereafter including model variants from KLING & FREITAG GmbH provided the products have not been altered subsequently. Loudspeaker systems: ACCESS B5 E 90 MK II...
  • Page 88 User's manual K&F SEQUENZA 5 incl. accessories Hannover, 30 March 2015 Jürgen Freitag (Managing Director / CEO) KLING & FREITAG GMBH © 2015 Version 4.1 Page 88 of 88...

Table of Contents