KLING & FREITAG CA 1515-9 User Manual
  1. Manuals
  2. Brands
  3. KLING & FREITAG Manuals
  4. Speaker System
  5. CA 1215-9
  6. User manual

KLING & FREITAG CA 1515-9 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KLING & FREITAG
CA 1201, CA 1215, CA 1515
User's Manual
Important Information,
Please Read Before Use!
KLING
FREITAG GmbH
&
Junkersstrasse 14
D-30179 Hannover
PHONE 0 (049) 511- 969 97-0
FAX 0 (049) 511- 67 37 94
www.kling-freitag.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CA 1515-9 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KLING & FREITAG CA 1515-9

Summary of Contents for KLING & FREITAG CA 1515-9

  • Page 1 KLING & FREITAG CA 1201, CA 1215, CA 1515 User's Manual Important Information, Please Read Before Use! KLING FREITAG GmbH & Junkersstrasse 14 D-30179 Hannover PHONE 0 (049) 511- 969 97-0 FAX 0 (049) 511- 67 37 94 www.kling-freitag.de...
  • Page 3 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Thank you for your decision to buy a KLING & FREITAG product. To guarantee a trouble-free operating of the equipment and to enable the KLING & FREITAG CA speaker system to achieve its full potential, please read the operating instructions carefully before use.

  • Page 4: Table Of Contents

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Contents Chapter Page General Instructions for Using Speakers Product Descriptions and Versions 2.1 CA 1201 2.2 CA 1215-6 2.3 CA 1215-9 2.4 CA 1515-6 2.5 CA 1515-9 Instructions for Suspending the Speakers 3.1 Using the Ancra Flying Points Coverage Angles of the CA Speakers 4.1 Changing the Coverage Angles...

  • Page 5: Chapter Page

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Chapter Page 10. Crossovers 10.1 Wiring Diagram CA 1201 10.1.1 Version A (old) 10.1.2 Version B (new) 10.2 Wiring Diagram CA 1215-6 and CA 1215 -9 10.2.1 Version A (old) 10.2.2 Version B (new) 10.3 Wiring Diagram CA 1515-6 and CA 1515-9...

  • Page 6: General Instructions For Using Speakers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 1. General Instructions for Using Speakers Mounting the speakers To avoid injury or damage, always be sure to mount the speakers securely so that they do not fall. Speakers, which are stacked, must be secured with safety straps. When laying the connecting cables, make sure that nobody can trip.

  • Page 7: Product Descriptions And Versions

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 2. Product Descriptions and Versions 2.1 CA 1201 Short description: 2-way full-range loudspeaker system with 12" low-mid chassis and 1" high frequency horn on a rotatable 90° x 60° CD horn. Homogeneous coverage and constant direc- tivity starting at 1.2 kHz.

  • Page 8: Ca 1215-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 2.3 CA 1215-9 Short description: 2-way high-power speaker system with 12" low-mid chassis and 1.5" high frequency horn driver on a rotatable 90° x 50° CD horn. Homogeneous coverage and constant directivity starting at 1.0 kHz.

  • Page 9: Ca 1515-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 2.5 CA 1515-9 Short description: 2-way high-power speaker system with 15" low-mid chassis and 1.5" high frequency horn driver on a rotatable 90° x 50° CD horn. Homogeneous coverage and constant directivity starting at 1.0 kHz.

  • Page 10: Instructions For Suspending The Speakers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 3. Instructions for Suspending the Speakers Only trained personnel should suspend speaker systems. Speaker systems, whether single or connected to one another, must always be secured to a second separate point, even if two rigging points are used for suspending the speaker system! Ensure that all connections are secured to prevent their detaching on their own and that only admissible statically tested and sufficiently sized connecting devices, ropes and...

  • Page 11: Using The Ancra Flying Points

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 3.1 Using the Ancra Flying Points Warning Flying Stud Ancra Flying Point Used as fastener to the Ancra Receptacle for special fasteners. Flying Point. Take the flying stud in one hand..

  • Page 12: Coverage Angles Of The Ca Speakers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 4. Coverage Angles of the CA Speakers The mid-high systems can be operated in a vertical or horizontal (i.e. as a stage moni- tor) position. The coverage pattern of the speaker can be adapted to special needs by a 90°...

  • Page 13: Proper Arrangement Of The Loudspeakers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 5. Proper Arrangement of the Loudspeakers Be aware of the fact that the logical targeted alignment of this high quality speaker system can lead to a significant qualitative increase in the acoustic result. It is not possi- ble to make generalities about the alignment of specific systems because the room has a substantial influence on the signal and the audible result.

  • Page 14: Arrayed Speaker Systems (Cluster)

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 5.1 Arrayed Speaker Systems (Cluster) If the loudspeakers are operated through the optional K&F C2 System Controller, we recommend turning on the 'Top Low Cut' switch for clustered operation. Thus the fre- quency response for this application can be optimised (see also K&F C2 User's Manual).

  • Page 15: With Rotated Horn

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 5.1.2 With rotated Horn Angle 2 Important Horn rotated Angle 3 Standing speaker Angle 1 A smaller angle 3 results in a smaller vertical coverage angle but increases the sound power level.

  • Page 16: Wiring

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 6. Wiring The speaker is equipped with two parallel Speakon connectors. Make sure that all units are switched off and all controls are turned down before con- necting your CA systems. −...

  • Page 17: Avoiding Ground Loops

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 6.2 Avoiding Ground Loops 6.2.1 What is a Ground Loop? Every component of a P.A. or Hi-Fi System has its own internal 0 V reference (ground). This point is often connected to the protective earth connector (PE / Ground). If two or more units are connected to one another with a line level audio cable, there may be a ground connection through the ground of the power supply cable (yellow-green) as well as through the shielding of the audio cable.

  • Page 18: Configurations And Connecting Diagrams

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 7. Configurations and Connecting Diagrams 7.1 Operating the Systems without C2 Controller The full-range system can be used alone or in conjunction with a K&F sub-woofer with integrated crossover (e.g. SW 112-XO / SW 115D-XO or SW 118E-XO). In this mode of operation the crossover limits the sub-woofer's frequency range.

  • Page 19: Full Range Mode & Subwoofer With Crossover (Xo)

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 7.1.2 Full Range Mode & Subwoofer with Crossover (XO) In this mode of operation you can easily realise applications, where a higher bass level is needed. Recommended combinations of the CA Systems, as described here, with K&F Bass Sys- tems: 2 CA Systems + 2- 4 x SW 112-XO 2 x SW 115D-XO...

  • Page 20: Operations With C2 Controller

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 7.2 Operations with C2 Controller By using carefully adjusted filters (EQ) on special system cards for the CA Systems, the C2 Controller optimises feedback prevention and the frequency response of the spea- kers.

  • Page 21: Full-Range Mode With K&F C2 Controller

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 7.2.1 Full-Range Mode with K&F C2 Controller LINK, e.g. to next controller ALL SPEAKONS Front View KLING & FULLRANGE FREITAG SYSTEM BOOST LOW CUT MODE MONO CONTROLLER 1+/1- SOUND SYSTEMS INPUT GAIN GAIN CH1 SUB OUT...

  • Page 22: Ca System & Bass With Controller C2 In 2-Way Active Mode

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 7.2.2 CA System & Bass with Controller C2 in 2-Way Active Mode For using Subwoofers with XO, set switch on the back to 'XO OFF' LINK, e.g. to next controller ALL SPEAKONS KLING &...

  • Page 23: Operating The Speakers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 8. Operating the Speakers − To avoid injury or damage, always be sure to mount the speakers securely so that they do not fall. Speakers, which are stacked, must be secured with safety straps. When laying the connecting cables, make sure that nobody can trip.

  • Page 24: Directions For Models With 100V Transformers

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 9. Directions for Models with 100V Transformers The Kling & Freitag Speakers are equipped with very high quality toroidal transformers. This minimises negative impact to the sound. High quality sound results can be achieved with 100 V speakers from Kling &...

  • Page 25: Version B (New)

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 10.1.2 Version B (new) CA 1201 and CA 1201-M from serial number 231 0000 20 30 up (as of the end of October 03) Pin assignment Speakon NL4 / XLR KLING &...

  • Page 26: Wiring Diagram Ca 1215-6 And Ca 1215 -9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 10.2 Wiring Diagram CA 1215-6 and CA 1215 -9 The crossover networks as of the end of 2003 differ from earlier models. Please com- pare the crossover built into your speaker with the figures below and wire accordingly. 10.2.1 Version A (old) CA 1215-6 and CA 1215-6-M up to serial number 23090007055 (before Sept.

  • Page 27: Version B (New)

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 10.2.2 Version B (new) CA 1215-6 and CA 1215-6-M from serial number 23090007056 up (as of Sept. 03) CA 1215-9 and CA 1215-9-M from serial number 23090002676 up (as of Sept. 03) IN + / link to XO 2 IN - / Link to XO 2 XO 1...

  • Page 28: Wiring Diagram Ca 1515-6 And Ca 1515-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 10.3 Wiring Diagram CA 1515-6 and CA 1515-9 The crossover networks as of the end of 2003 differ from earlier models. Please com- pare the crossover built into your speaker with the figures below and wire accordingly. 10.3.1 Version A (old) XO 1 LF +...

  • Page 29: Version B (New)

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 10.3.2 Version B (new) IN + / link to XO 2 IN - / Link to XO 2 Pin assignment Speakon NL4 / XLR − 11. Touching Up Damage to Paint / Changing the Front Foam Although the PU structured paint used by KLING &...

  • Page 30: Technical Specifications

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 12. Technical Specifications 12.1 CA 1201 Design 2-way passive system, bass reflex tuning Frequency range -10 dB 54 Hz - 19 kHz Frequency range ± 3 dB 65 Hz - 18 kHz Coverage angles nominal 90°...

  • Page 31: Ca 1215-6

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 12.2 CA 1215-6 Design 2-way passive system, bass reflex tuning Frequency range -10 dB 62 Hz - 22 kHz Frequency range ± 3 dB 84 Hz - 19 kHz Coverage angles nominal 65°x 50°...

  • Page 32: Ca 1215-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 12.3 CA 1215-9 Design 2-way passive system, bass reflex tuning Frequency range -10 dB 58 Hz - 22 kHz Frequency range ± 3 dB 80 Hz - 19 kHz Coverage angles nominal 90°x 50°...

  • Page 33: Ca 1515-6

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 12.4 CA 1515-6 Design 2-way passive system, bass reflex tuning Frequency range -10 dB 47 Hz - 22 kHz Frequency range ± 3 dB 77 Hz - 19 kHz Coverage angles nominal 65°x 50°...

  • Page 34: Ca 1515-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 12.5 CA 1515-9 Design 2-way passive system, bass reflex tuning Frequency range -10 dB 58 Hz - 22 kHz Frequency range ± 3 dB 75 Hz - 19 kHz Coverage angles nominal 90°x 50°...

  • Page 35: Measuring Charts

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 13. Measuring Charts 13.1 CA 1201 SPL (dB) Frequency response 'on axis' IMPEDANCE (Ohm) 31,6 3,16 1000 10000 20000 Frequency (Hz) Frequency response 'on axis' with K&F Controller C2 Fullrange 2-Way TopLowCut / Fullrange TopLowCut / 2-Way...
  • Page 36 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical frequency response 'off axis down' 0° 10° 20° 30° 40° 1000 10000 20000 Frequency (Hz) Beamwidth vs. frequency Horizontal Vertical 1000 10000 20000 Frequency (Hz) Q-Index 1000 10000 20000 Frequency (Hz) KLING &...
  • Page 37 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Horizontal Polar Diagrams CA 1201 0° 330 ° 30° 300 ° 60° 1.25 kHz 1.6 kHz 270 ° 90° 2 kHz 2.5 kHz 120 ° 240 ° 210 ° 150 ° 180 °...
  • Page 38 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 0 ° 330 ° 30° 300 ° 60° 3.15 kHz 4 kHz 270 ° 90° 5 kHz 6.3 kHz 240 ° 120° 210 ° 150° 180 ° 0 ° 330 ° 30°...
  • Page 39 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical Polar Diagrams CA 1201 90° 120 ° 60° 150 ° 30° 200 Hz 250 Hz 180 ° 0° 315 Hz 400 Hz 210 ° 330° 240 ° 300° 270° 90°...
  • Page 40 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 90 ° 120 ° 60 ° 150 ° 30° 3.15 kHz 4 kHz 180 ° 0° 5 kHz 6.3 kHz 330 ° 210 ° 240 ° 300 ° 270 ° 90 °...
  • Page 41 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 13.2 CA 1215-6 SPL (dB) Frequency response 'on axis' IMPEDANCE (Ohm) 31,6 3,16 1000 10000 20000 Frequency (Hz) Frequency response 'on axis' with K&F Controller C2 Fullrange 2-Weg TopLowCut / Fullrange TopLowCut / 2-Weg High Boost 1000...
  • Page 42 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical frequency response 'off axis down' 0° 10° 20° 30° 40° 1000 10000 20000 Frequency (Hz) Beamwidth vs. frequency Horizontal Vertical 1000 10000 20000 Frequency (Hz) Q-Index 1000 10000 20000 Frequency (Hz) KLING &...

  • Page 43: Ca 1215-6

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Horizontal Polar Diagrams CA 1215-6 0° 330 ° 30° 300° 60° 200 Hz 250 Hz 270 ° 90° 315 Hz 400 Hz 120° 240° 210 ° 150° 180° 0° 330 ° 30°...
  • Page 44 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 0 ° 330 ° 30 ° 300 ° 60° 3.15 kHz 4 kHz 270 ° 90° 5 kHz 6.3 kHz 120 ° 240 ° 210 ° 150 ° 180 ° 0 °...
  • Page 45 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical Polar Diagrams CA 1215-6 90° 120 ° 60° 150° 30° 200 Hz 250 Hz 180 ° 0° 315 Hz 400 Hz 330° 210° 240 ° 300° 270° 90° 120 ° 60°...
  • Page 46 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 90 ° 120 ° 60 ° 150 ° 30° 3.15 kHz 4 kHz 180 ° 0° 5 kHz 6.3 kHz 330 ° 210 ° 240 ° 300 ° 270 ° 90 °...
  • Page 47 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 13.3 CA 1215-9 SPL (dB) Frequency response 'on axis' IMPEDANCE (Ohm) 31,6 3,16 1000 10000 20000 Frequency(Hz) Frequency response 'on axis' with K&F Controller C2 Fullrange 2-Weg TopLowCut / Fullrange TopLowCut / 2-Weg High Boost 1000...
  • Page 48 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical frequency response 'off axis down' 0° 10° 20° 30° 40° 1000 10000 20000 Frequency (Hz) Beamwidth vs. frequency Horizontal Vertical 1000 10000 20000 Frequency (Hz) Q-Index 1000 10000 20000 Frequency (Hz) KLING &...

  • Page 49: Ca 1215-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Horizontal Polar Diagrams CA 1215-9 0° 330 ° 30° 300 ° 60° 200 Hz 250 Hz 270 ° 90° 315 Hz 400 Hz 240 ° 120° 210 ° 150 ° 180 °...
  • Page 50 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 0 ° 330 ° 30° 300 ° 60° 3.15 kHz 4 kHz 270 ° 90° 5 kHz 6.3 kHz 240 ° 120° 210 ° 150° 180 ° 0 ° 330 ° 30°...
  • Page 51 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical Polar Diagrams CA 1215-9 90° 120 ° 60° 150° 30° 200 Hz 250 Hz 180 ° 0° 315 Hz 400 Hz 330° 210° 240 ° 300° 270° 90° 120 ° 60°...
  • Page 52 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 90 ° 120 ° 60 ° 150 ° 30° 3.15 kHz 4 kHz 0 ° 180 ° 5 kHz 6.3 kHz 330 ° 210 ° 240 ° 300 ° 270 ° 90 °...
  • Page 53 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 13.4 CA 1515-6 SPL (dB) Frequency response 'on axis' IMPEDANCE (Ohm) 31,6 3,16 1000 10000 20000 Frequency(Hz) Frequency response 'on axis' with K&F Controller C2 Fullrange 2-Weg TopLowCut / Fullrange TopLowCut / 2-Weg High Boost 1000...
  • Page 54 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical frequency response 'off axis down' 0° 10° 20° 30° 40° 1000 10000 20000 Frequency (Hz) Beamwidth vs. frequency Horizontal Vertikal 1000 10000 20000 Frequency (Hz) Q-Index 1000 10000 20000 Frequency (Hz) KLING &...

  • Page 55: Ca 1515-6

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Horizontal Polar Diagrams CA 1515-6 0° 330 ° 30° 300° 60° 200 Hz 250 Hz 270 ° 90° 315 Hz 400 Hz 120° 240° 210 ° 150° 180° 0° 330 ° 30°...
  • Page 56 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 0 ° 330 ° 30 ° 300 ° 60° 3.15 kHz 4 kHz 270 ° 90° 5 kHz 6.3 kHz 120 ° 240 ° 210 ° 150 ° 180 ° 0 °...
  • Page 57 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical Polar Diagrams CA 1515-6 90° 120 ° 60° 150 ° 30° 200 Hz 250 Hz 180 ° 0° 315 Hz 400 Hz 210 ° 330° 240 ° 300° 270° 90°...
  • Page 58 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 90 ° 120 ° 60 ° 150 ° 30° 3.15 kHz 4 kHz 180 ° 0° 5 kHz 6.3 kHz 330 ° 210 ° 240 ° 300 ° 270 ° 90 °...
  • Page 59 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 13.5 CA 1515-9 SPL (dB) Frequency response 'on axis' IMPEDANCE (Ohm) 31,6 3,16 1000 10000 20000 Frequency(Hz) Frequency response 'on axis' with K&F Controller C2 Fullrange 2-Weg TopLowCut / Fullrange TopLowCut / 2-Weg High Boost 1000...
  • Page 60 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical frequency response ‚off axis down’ 0° 10° 20° 30° 40° 1000 10000 20000 Frequency (Hz) Beamwidth vs. frequency Horizontal Vertikal 1000 10000 20000 Frequency (Hz) Q-Index 1000 10000 20000 Frequency (Hz) KLING &...

  • Page 61: Ca 1515-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Horizontal Polar Diagrams CA 1515-9 0° 330 ° 30° 300° 60° 200 Hz 250 Hz 270 ° 90° 315 Hz 400 Hz 120° 240° 210 ° 150° 180° 0° 330 ° 30°...
  • Page 62 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 0 ° 330 ° 30° 300 ° 60° 3.15 kHz 4 kHz 270 ° 90° 5 kHz 6.3 kHz 240 ° 120° 210 ° 150° 180 ° 0 ° 330 ° 30°...
  • Page 63 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 Vertical Polar Diagrams CA 1515-9 90° 120 ° 60° 150° 30° 200 Hz 250 Hz 180 ° 0° 315 Hz 400 Hz 330° 210° 240 ° 300° 270° 90° 120 ° 60°...
  • Page 64 User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 90 ° 120 ° 60 ° 150 ° 30° 3.15 kHz 4 kHz 180 ° 0° 5 kHz 6.3 kHz 330 ° 210 ° 240 ° 300 ° 270 ° 90 °...

  • Page 65: Dimensions

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 14. Dimensions 14.1 CA 1201, CA 1215-6 and CA 1215-9 189.3 mm [7.451 inch] pole mount K&M 19656 Rigging Points 183.2 mm ANCRA Jungfalk [7.211 inch] 120030-31 378.5 mm 375 mm 189.3 mm [14.903 inch] [14.763 inch]...

  • Page 66: Ca 1515-6 And Ca 1515-9

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 14.3 CA 1515-6 and CA 1515-9 216.8 mm [8.536 inch] Plastic Sliders pole mount Rigging Points K&M 19656 ANCRA Jungfalk 120030-31 433.6 mm 411.3 mm 212.3 mm [17.073 inch] [16.195 inch] [8.358 inch] 73°...

  • Page 67: Accessories For The Ca Systems

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 15. Accessories for the CA Systems Tilt bracket CA 1201/CA 1215 Cradle CA 1201/CA 1215 Tilt bracket CA 1515 Cradle CA 1515 Multi Cradle CA 1201/CA 1215 Wall mount bracket, Multi Cradle CA 1515 adjustable tilt, up to 50 kg Tilt bracket...

  • Page 68: Important Information For The 'Outdoor Installation' Option

    User's Manual CA 1201, CA 1215-6 /-9, CA 1515-6 /-9 16. Important Information for the 'Outdoor Installation' Option Although the series 'Outdoor Installation' is optimised for outdoor fixed installations, the speakers should not be exposed to direct weather influence like rain or direct sunlight. Warning The version ‚Outdoor Installation’...

This manual is also suitable for:

Ca 1201

Table of Contents