Setting The Time Code - Canon EOS 5DS Instruction Manual

Hide thumbs Also See for EOS 5DS:

Table of Contents

Setting the Time Code

: The time code counts up only while you are shooting a

movie. The time code will continue in the sequence of the

movie files captured.

: The time code counts up whether you are shooting a

movie or not.

Start Time Setting

You can set the time code's start time.

Manual input setting : You can freely set the hour, minute, second,

Set to camera time : Sets hours, minutes, and seconds to match the

Shooting still photos during movie shooting will cause a discrepancy

between the actual time and time code.

If [Free run] is set and you change the time, zone, or daylight saving

time (p.49), the time code will be affected.

The time code is a time reference

recorded automatically to synchronize

the movie during movie shooting. It is

recorded at all times in the following

units: hours, minutes, seconds, and

frames. It is mainly used during movie

Use [z5: Time code] (the [z3] tab in

<A>) to set the time code.

: The time set with [Manual input setting] and

[Set to camera time] is reset to "00:00:00." or

"00:00:00:" (p.305).

camera's internal clock. "Frames" will be set to