Silent Control - Canon EOS 5DS Instruction Manual

3
Silent ControlN
You can change the settings of the ISO speed, sound-recording level,
etc. without making too much noise while shooting a movie.
If [z5: Silent Control] is set to [Enable h], you cannot change Quick
Control settings with the <5> Quick Control dial during movie shooting.
Even if you change the aperture silently with <h>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on the <h>, the touch operation may not work. In
such a case, use a clean cloth to clean the <h>. If it still does not work,
wait a while and try again.
Before shooting a movie, you can use <h> with the [Rec. level] setting to
adjust the sound-recording level.
302
When [z5: Silent Control] is set to
[Enable h], you can use the touch pad
<h> on the inner ring of the Quick
Control Dial.
You can just touch the top, bottom, left,
or right of <h> for silent operation.
During movie shooting, you can press
the <Q> button to display the Quick
Control screen and change the functions
below with <h>.
Settable Functions
Shutter speed
Aperture
Exposure compensation
ISO speed
2
Recording level*
*1: With Auto ISO set.
*2: With [Sound recording: Manual] set.
Shooting Mode
d/F s f a
k k
- -
k k
- -
k k k k*
k
- - -
k k k k
1