Page 1 INSTRUCTION This manual is for the EOS 5D Mark II installed with MANUAL firmware Version 2.0.0 or later.
Page 2 If the camera or memory card is faulty and the images cannot be recorded or downloaded to a personal computer, Canon cannot be held liable for any loss or inconvenience caused. Copyrights Copyright laws in your country may prohibit the use of your recorded images of people and certain subjects for anything but private enjoyment.
Page 3: Item Check List
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Wide Strap EW-EOS5DMKII EOS DIGITAL Solution Disk (Software) * Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a power cord.) If you purchased a Lens Kit, check that the lens is included.
Page 4: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> : Indicates the Multi-controller. <0> : Indicates the setting button. , 8: Indicates that the respective function remains 0, 9, * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the...
Page 5: Table Of Contents
Chapters For first-time DSLR users, chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Camera basics. Getting Started Basic Shooting Fully automatic shooting. Image Settings Setting the AF and Drive Modes Advanced Operations Shooting features for specific types of subjects. Live View Shooting Shoot still photos while viewing the LCD monitor.
Page 6 Contents Introduction Item Check List... 3 Conventions Used in this Manual ... 4 Chapters ... 5 Index to Features ... 10 Handling Precautions ... 12 Quick Start Guide ... 14 Nomenclature ... 16 Getting Started Charging the Battery ... 24 Installing and Removing the Battery...
Page 7 Image Settings Setting the Image-recording Quality...54 i: Setting the ISO Speed...57 A Selecting a Picture Style ...59 A Customizing a Picture Style ...61 A Registering a Picture Style...63 B: Setting the White Balance ...65 O Custom White Balance ...66 P Setting the Color Temperature ...67 u White Balance Correction ...68 Lens Peripheral Illumination Correction ...70 Creating and Selecting a Folder...72...
Page 8 Contents R Remote Control Shooting ... 102 D Flash Photography ... 103 Setting the Flash ... 105 Live View Shooting A Preparing for Live View Shooting... 108 A Live View Shooting... 110 Shooting Function Settings ... 112 Menu Function Settings... 113 Using AF to Focus ...
Page 9 Sensor Cleaning f Automatic Sensor Cleaning ...166 Appending Dust Delete Data...167 Manual Sensor Cleaning...169 Printing Images and Transferring Images to a Computer 171 Preparing to Print ...172 wPrinting...174 Trimming the Image ...179 W Digital Print Order Format (DPOF) ...181 Direct Printing with DPOF ...184 d Transferring Images to a Personal Computer...185 Customizing the Camera Setting Custom Functions ...190...
Page 10: Index To Features
Index to Features Power Battery • Charging • Battery check • Battery information check Power outlet Auto power off Lens Attaching/Detaching Zoom Image Stabilizer Basic Settings (Menu Functions) Language Date/Time LCD brightness adjustment Beeper Shoot w/o card Recording Images Format Create/select a folder File No.
Page 11 Manual exposure Bulb Mirror lockup Quick Control screen Self-timer Remote control Exposure adjustment Exposure compensation AE lock Exposure level increments Flash External flash Flash control Flash Custom Functions Live View shooting Still photo shooting • AF • Manual focusing • Exposure simulation •...
Page 12: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Page 13 LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded.
Page 14: Quick Start Guide
Quick Start Guide Insert the battery. To charge the battery, see page 24. Attach the lens. (p.31) Align the red dot. Set the lens focus mode switch to <AF>. (p.31) Open the slot cover and insert a card. Face the label side toward you and insert the end with the small holes into the camera.
Page 15 To view the images captured so far, see “Image Playback” (p.144). To delete an image, see “Erasing Images” (p.160). Set the Mode Dial to <1> (Full Auto). (p.48) All the necessary camera settings will be set automatically. Focus the subject. Look through the viewfinder and aim the viewfinder center over the subject.
Page 16: Nomenclature
Nomenclature For detailed information, reference page numbers are provided in parentheses (p.**). <o> AF mode selection/Drive mode selection button (p.78/85) <m> ISO speed setting/Flash exposure compensation button (p.57/103) LCD panel illumination button (p.99) <6> Main Dial (p.36) Shutter button (p.35) Remote control sensor (p.102)
Page 17 <9> Multi-controller (p.36) Dioptric adjustment knob (p.34) Speaker (p.153) Eyecup (p.100) Viewfinder eyepiece <A/l> Live View shooting/Print/Share button (p.109/177,186) <M> Menu button (p.40) <A> Picture Style selection button (p.59) Info/ Trimming orientation button (p.111,135,210/179) <x> Playback button (p.144) <L> Erase button (p.160) Extension system terminal LCD monitor (p.40, 162)
Page 18: Lcd Panel
Nomenclature LCD Panel Shutter speed Busy (buSY) Image-recording quality (p.54) Large/Fine Large/Normal Medium/Fine Medium/Normal Small/Fine Small/Normal 1 RAW D Small RAW White balance (p.65) Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom P Color temperature...
Page 19: Viewfinder Information
Viewfinder Information Focusing screen < > Battery check <A> AE lock/ AEB in-progress <D> Flash-ready Improper FE lock warning <e> High-speed sync (FP flash) <d> FE lock/ FEB in-progress <y> Flash exposure compensation Shutter speed FE lock (FEL) Busy (buSY) Aperture The display will show only the settings currently applied.
Page 20 Nomenclature Mode Dial Camera User Settings Most camera settings can be registered under w, x, or y (p.206). F : Bulb (p.99) a : Manual exposure (p.94) f : Aperture-priority AE (p.92) s : Shutter-priority AE (p.90) d : Program AE (p.88) Fully-Automatic Modes All you do is press the shutter button.
Page 21 EF24-105mm f/4L IS USM lens Focus mode switch (p.31) Hood mount (p.32) 77 mm filter thread (front of lens) Focusing ring (p.84,122) Image Stabilizer switch (p.33) Nomenclature Distance scale Infrared index Zoom ring (p.32) Zoom position index (p.32) Contacts (p.13) Lens mount index (p.31)
Page 22 Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6 (p.24). Battery pack slot Charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Page 23: Getting Started
Getting Started This chapter explains preparatory steps and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 24: Charging The Battery
Charging the Battery LC-E6 LC-E6E Charge Level 0 - 50% 50 - 75% 75% or higher Fully charged It takes about 2.5 hours to fully recharge a completely exhausted battery at 23°C / 73°F. The time required to recharge the battery depends on the ambient temperature and battery’s charge level.
Page 25 Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power. After recharging the battery, detach it and unplug the power cord or prongs from the power outlet.
Page 26: Installing And Removing The Battery
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack LP-E6 into the camera. Only the Battery Pack LP-E6 can be used. Removing the Battery After opening the battery compartment cover, be careful not to swing it back further.
Page 27: Turning On The Power
Turning on the Power About the Automatic Self-Cleaning Sensor Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display <f>. Even during the sensor cleaning, you can still shoot by pressing the shutter button halfway (p.35) to stop the sensor cleaning and take a picture.
Page 28: Checking The Battery Level
Turning on the Power Checking the Battery Level When the power switch is set to <1> or <J>, the battery level will be indicated in one of six levels: Battery Life Temperature Possible shots The figures above are based on a fully-charged Battery Pack LP-E6, no Live View shooting, and CIPA (Camera &...
Page 29: Installing And Removing The Cf Card
Installing and Removing the CF Card Although the thickness is different between the two types of CF (CompactFlash) cards, either one can be inserted into the camera. Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used. Installing the Card Label side Card ejection button Possible shots...
Page 30: Removing The Card
Installing and Removing the CF Card Removing the Card Access lamp Card ejection button The access lamp lights or blinks while the picture is taken, when data is being transferred to the card and when data is being recorded, read, or erased on the card. While the access lamp is lit or blinking, never do any of the following.
Page 31: Attaching And Detaching A Lens
Attaching and Detaching a Lens Attaching a Lens Do not look at the sun directly through any lens. Doing so may cause loss of vision. The camera cannot be used with EF-S lenses. Minimizing Dust When changing lenses, do it in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera.
Page 32: Zoom
Attaching and Detaching a Lens About Zooming Detaching the Lens Attaching a Hood When the dedicated EW-83H hood is attached to the EF24-105mm f/4L IS USM lens, it can block unwanted light and also protect the front of the lens from rain, snow, dust, etc. When storing the lens in a bag, etc., you can also attach the hood in reverse.
Page 33: About The Lens Image Stabilizer
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based on the EF24-105mm f/4L IS USM lens as an example. * IS stands for Image Stabilizer.
Page 34: Basic Operation
Basic Operation Adjusting the Viewfinder Clarity If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake.
Page 35: Shutter Button
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Preventing Camera Shake Camera movement during the moment of exposure is called camera shake. Camera shake can cause blurred pictures. To prevent camera shake, note the following: •...
Page 36 Basic Operation Using the Main Dial for Selecting Operating the Multi-controller After pressing a button, turn the <6> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <6> dial to set the desired setting.
Page 37 Using the Quick Control Dial for Selecting Before using the < > dial, set the power switch to <J>. You can also do step (1) when the power switch is set to <1>. After pressing a button, turn the <5> dial. When you press a button, its function remains selected for 6 seconds (9).
Page 38: Using The Quick Control Screen
9 Using the Quick Control Screen The shooting settings are displayed on the LCD monitor where you can quickly select and set the functions. This is called the Quick Control screen. 1 (Full Auto) d/s/f/a/F If [8C.Fn III -3: AF point selection method] is set to [1: Multi-controller direct], the Quick Control screen cannot be displayed (p.198).
Page 39 Quick Control Screen Nomenclature Aperture (p.92) Shutter speed (p.90) Exposure compensation/ AEB setting (p.97) Shooting mode (p.20) AF point (p.81) Image-recording quality (p.54) AF mode (p.78) Function Setting Display <0> Highlight tone priority <A> cannot be set with the Quick Control screen. 9 Using the Quick Control Screen Picture Style (p.59) ISO speed (p.57)
Page 40: Menu Operations
Menu Operations You can set various functions with the menus such as the image- recording quality, date/time, etc. While looking at the LCD monitor, you use the <M> button on the camera back and the <6> < <M> button LCD monitor Fully-Automatic Modes (1/C) Menu Screen *The [2/8/9] tabs are not displayed in the fully-automatic modes.
Page 41 Menu Setting Procedure The explanation of menu functions hereinafter assumes that you have pressed the <M> button to display the menu screen. You can also use <9> to set menu settings. (Except for [3 Erase images] and [5 Format].) Display the menu. Press the <M>...
Page 42: Before You Start
Before You Start 3 Setting the Interface Language 3 Setting the Date and Time Check if the camera’s date and time are set correctly. If necessary, set the correct date and time. It is important to set the correct date/time because it will be recorded together with each captured image.
Page 43: Formatting The Card
3 Formatting the Card If the card is new or was previously formatted by another camera or personal computer, formatting the card with the camera is recommended. When the card is formatted, all images and data in the card will be erased.
Page 44: Set The Power-Off Time/Auto Power Off
Before You Start 3 Set the Power-off Time/Auto Power Off You can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.
Page 45 Shooting Settings AF mode One-Shot AF AF point Automatic selection selection q (Evaluative Metering mode metering) Drive mode u (Single shooting) Exposure 0 (Zero) compensation Canceled Flash exposure 0 (Zero) compensation External No changes Speedlite control Camera Settings Auto power off 1 min.
Page 46: About Copyright Information
Before You Start 3 About Copyright InformationN If you use EOS Utility (provided software) to set your copyright information, the copyright information will be added to the image’s Exif information. With the camera, the copyright information can only be viewed or deleted. If your copyright information has not been set, it will be grayed out on the screen and unusable.
Page 47: Basic Shooting
Basic Shooting This chapter explains how to use the fully-automatic modes (1/C) on the Mode Dial for best results. With the fully-automatic modes (1/C), all you do is point and shoot and the camera sets everything automatically (p.218). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in the fully-automatic modes.
Page 48: Fully Automatic Shooting
1 Fully Automatic Shooting AF point Focus confirmation light Set the Mode Dial to <1>. Aim any AF point over the subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier.
Page 49 1 Fully Automatic Shooting The focus confirmation light <o> blinks and focus is not achieved. Aim the AF point over an area having good contrast between light and dark, then press the shutter button halfway (p.84). If you are too close to the subject, move away and try again.
Page 50: Full Auto Techniques
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture.
Page 51: C Creative Auto Shooting
C Creative Auto Shooting The <1> Full Auto mode takes care of everything, whereas the <C> Creative Auto mode enables you to easily change the picture’s brightness, depth of field, color tone (Picture Style), etc. The default settings are the same as the <1> (Full Auto) mode. * CA stands for Creative Auto.
Page 52: Battery Check
C Creative Auto Shooting Shutter speed and aperture Battery check (1) Blurring/sharpening the background If you move the index mark toward the left, the background will look more blurred. If you move it toward the right, the background will look more in focus. (2) Adjusting the picture brightness If you move the index mark toward the left, the picture will look darker.
Page 53: Image Settings
This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Styles, white balance, color space, etc. In the fully-automatic modes (1/C), only the image- recording quality, lens peripheral illumination correction, and file numbering method can be set as explained in this chapter.
Page 54: Setting The Image-Recording Quality
Setting the Image-recording Quality You can select the pixel count and the image quality. There are six JPEG recording quality settings: 73, 83, 74, 84, 76, and 86. There are three RAW recording quality settings: 1, D1, and D2. RAW images must be processed with the provided software (p.56).
Page 55 Approx. 21.0 Figures for the file size, possible shots, and maximum burst during continuous shooting are based on Canon’s testing standards (ISO 100 and Standard Picture Style) using a 2GB card. These figures will vary depending on the subject, card brand, ISO speed, Picture Style, Custom Functions, etc.
Page 56: Maximum Burst
3 Setting the Image-recording Quality About RAW The RAW image is the data output by the image sensor, converted to digital data and recorded on the card as is. You can select it from among 1, D1, or D2. “RAW” written in the text will refer to all three RAW settings: 1, D1, and D2.
Page 57: I: Setting The Iso Speed
The maximum burst is displayed even when a card is not in the camera. Make sure that a card is loaded before taking a picture. If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong], the maximum burst will be greatly reduced (p.195). If the viewfinder displays “99”...
Page 58 i: Setting the ISO SpeedN ISO Speed Guide ISO Speed L, 100 - 200 400 - 800 1600 - 6400, H1, H2 If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], “L” (equivalent to ISO 50), ISO 100/125/160, “H1” (equivalent to ISO 12800) and “H2”...
Page 59: A Selecting A Picture Style
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. In the <1> (Full Auto) mode, you cannot select the Picture Style. You can also use the [2 Picture Style] menu to select the Picture Style. Picture Style Effects P Standard (C: Standard) The image looks vivid, sharp, and crisp.
Page 60: About The Symbols
A Selecting a Picture StyleN S Neutral This Picture Style is for users who prefer to process images with their personal computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their personal computer.
Page 61: A Customizing A Picture Style
A Customizing a Picture StyleN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see the next page. Parameter Settings and Effects g Sharpness h Contrast i Saturation j Color tone...
Page 62 A Customizing a Picture StyleN By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the modified Picture Style and then shoot. Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding...
Page 63: A Registering A Picture Style
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different.
Page 64 A Registering a Picture StyleN If a Picture Style has already been registered under [User Def. *], changing the base Picture Style in step 4 will nullify the parameter settings of the registered Picture Style. To shoot with the registered Picture Style, follow step 2 on the preceding page to select [User Def.
Page 65: B: Setting The White Balance
B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the white balance for each light source or set it manually by shooting a white object.
Page 66: O Custom White Balance
B: Setting the White BalanceN Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do this procedure under the actual light source to be used. Spot metering circle Photograph a white object.
Page 67: P Setting The Color Temperature
If the exposure obtained in step 1 is way off, a correct white balance might not be obtained. If the image was captured while the Picture Style was set to [Monochrome] (p.60), it cannot be selected in step 3. Instead of a white object, an 18% gray card (commercially available) can produce a more accurate white balance.
Page 68: White Balance Correction
u White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters.
Page 69: Wb Bracketing
White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Page 70: Lens Peripheral Illumination Correction
Lens Peripheral Illumination Correction Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. This can be corrected. For JPEG images, lens light fall-off is corrected when the image is captured.
Page 71 About the Lens Correction Data The camera already contains lens peripheral light correction data for about 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With the EOS Utility (provided software), you can check which lenses have their correction data registered in the camera.
Page 72: Creating And Selecting A Folder
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder Select [Select folder]. Under the [5] tab, select [Select folder], then press <0>.
Page 73: Selecting A Folder
Selecting a Folder Lowest file number Quantity of images in folder Folder name Highest file number About Folders As with “100EOS5D” for example, the folder name starts with three digits (folder number) followed by five alphanumeric characters. A folder can contain up to 9999 images (file No.
Page 74: File Numbering Methods
File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on a personal computer in this format: IMG_0001.JPG.
Page 75: Auto Reset
Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders.
Page 76: Setting The Color Space
Setting the Color SpaceN The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the fully-automatic modes (1/C), sRGB is set automatically. About Adobe RGB This color space is mainly used for commercial printing and other industrial uses.
Page 77: Setting The Af And Drive Modes
Setting the AF and You can also select the AF mode and drive mode best matching the shooting conditions and subject. The M icon on the right of the page title indicates that the function can be used when the Mode Dial is set to <d/s/ f/a/F>.
Page 78: F: Selecting The Af Mode
f: Selecting the AF ModeN Select the AF mode suiting the shooting conditions or subject. In the fully-automatic modes (1/C), “AI Focus AF” is set automatically. On the lens, set the focus mode switch to <AF>. Press the <o> button. Select the AF mode.
Page 79: Ai Servo Af For Moving Subjects
One-Shot AF for Still Subjects AF point Focus confirmation light In the d/s/f/a/F shooting modes, AF is also possible by pressing the button. If focus cannot be achieved, the focus confirmation light <o> in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely.
Page 80: Assist Af Points
f: Selecting the AF ModeN When the AF point selection (p.81) is automatic, the camera first uses the center AF point to focus. Within the spot metering circle, there are six invisible Assist AF points ( in diagram) that function in the AI SERVO AF mode.
Page 81: S Selecting The Af Point
S Selecting the AF PointN Select one of the nine AF points to autofocus. Manual selection enables you to select one of the nine AF points. And automatic selection has the camera automatically select one of the nine AF points. In the fully-automatic modes (1/C), automatic AF point selection will be set automatically.
Page 82 S Selecting the AF PointN Selecting with the Dial When looking at the LCD panel to select the AF point, note the following: Automatic selection right If focus cannot be achieved with the external, EOS-dedicated Speedlite’s AF-assist beam, select the center AF point. When you turn the <6>...
Page 83 Lens’ Maximum Aperture and AF Sensitivity With lenses whose maximum aperture is larger than f/5.6 With the center AF point, cross-type AF (sensitive to both vertical and horizontal lines) is possible. The remaining eight AF points are horizontal-line sensitive or vertical-line sensitive. With lenses whose maximum aperture is larger than f/2.8 With the center AF point, high-precision, cross-type AF sensitive to both vertical and horizontal lines is possible.
Page 84: When Autofocus Fails
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following: Subjects difficult to focus Low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in low light Extremely backlit or reflective subjects (Example: Car with a reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.)
Page 85: Selecting The Drive Mode
i Selecting the Drive ModeN Single and continuous drive modes are provided. In the <1> (Full Auto) mode, single shooting is set automatically. u : Single shooting When you press the shutter button completely, one shot will be taken. i : Continuous shooting (Max. 3.9 shots per sec.) While you press the shutter button completely, shots will be taken continuously.
Page 86: Self-Timer Operation
j Self-timer Operation Use the self-timer when you want to be in the picture. The <Q> (10 sec. timer) can be used in all shooting modes. After taking self-timer shots, you should check the image for proper focus and exposure (p.144). If you will not look through the viewfinder when you press the shutter button, attach the eyepiece cover (p.100).
Page 87: Advanced Operations
Advanced Operations The M icon on the right of the page title indicates that the function can be used when the Mode Dial is set to <d/s/ f/a/F>. After you press the shutter button halfway and let go, the LCD panel and viewfinder information will remain displayed for about 4 sec.
Page 88: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * <d> stands for Program. * AE stands for Auto Exposure. Set the Mode Dial to <d>. Focus the subject. Look through the viewfinder and aim the selected AF point over the subject.
Page 89 If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Page 90: S: Shutter-Priority Ae
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion.
Page 91 If the maximum aperture blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed.
Page 92: F: Aperture-Priority Ae
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 93: Depth Of Field Preview
If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (smaller f/number) until the blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (larger f/number) until the blinking stops or set a lower ISO speed.
Page 94: A: Manual Exposure
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available handheld exposure meter. This method is called manual exposure. * <a>...
Page 95: Selecting The Metering Mode
q Selecting the Metering ModeN You can select one of four methods to measure the subject brightness. In the fully-automatic modes (1/C), evaluative metering is set automatically. This is an all-around metering mode suited for portraits and even backlit subjects. The camera sets the exposure automatically to suit the scene.
Page 96: Setting Exposure Compensation
Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments. Increased exposure for a brighter image Decreased exposure for a...
Page 97: Auto Exposure Bracketing (Aeb)
h Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±2 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. AEB amount When you exit the menu, <h>...
Page 98: A Ae Lock
A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot.
Page 99: F: Bulb Exposures
F: Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
Page 100: Using The Eyepiece Cover
F: Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. Connecting the Remote Switch You can connect the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it.
Page 101: Mirror Lockup
Mirror LockupN Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups. When [8C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.199), shooting with mirror lockup will be possible.
Page 102: R Remote Control Shooting
R Remote Control Shooting RC-1 RC-6/RC-5 Remote control sensor Camera misoperation may occur near certain types of fluorescent lights. During wireless remote control, try to keep the camera away from fluorescent light. With Remote Controller RC-6, RC-1, or RC- 5 (all sold separately), you can shoot remotely up to about 5 meters/16.4 feet from the camera.
Page 103: D Flash Photography
Press the camera’s <m> button, then turn the <5> dial while looking at the LCD panel or LCD monitor. Using Non-EX-series Canon Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL autoflash mode, the flash can be fired at full output only.
Page 104 PC Terminal Cautions for Live View shooting When using a non-Canon flash unit for Live View shooting, set the [6 Live View/Movie func. set.] menu’s [Silent shoot.] to [Disable] (p.113). The flash will not fire if it is set to [Mode 1] or [Mode 2].
Page 105: Setting The Flash
Setting the FlashN When an EX-series Speedlite (such as the 580EX II, 430EX II, and 270EX) settable by the camera is attached, you can use the camera’s menu screen to set the Speedlite’s flash function settings and Custom Functions. First attach the Speedlite to the camera and turn on the Speedlite. For details on Speedlite functions, refer to the Speedlite’s instruction manual.
Page 106 3 Setting the FlashN About E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Flash exposure compensation may be necessary depending on the scene, so this setting is for advanced users.
Page 107: Live View Shooting
Live View Shooting (Still photo shooting with the LCD monitor) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images.
Page 108: A Preparing For Live View Shooting
A Preparing for Live View ShootingN This sets the camera for Live View shooting of still photos. To shoot movies, see page 125. Set the shooting mode. Select one of the following modes: d/ s/f/a/F. Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func.
Page 109: Exposure Simulation
About [Screen settings] You can select the LCD monitor’s image brightness. Stills displayh Geared for still photos, the image is displayed at the standard brightness to make it easy to see. Exposure simulationg Geared for still photos, the Live View image will closely reflect the brightness level of the image you capture.
Page 110: A Live View Shooting
A Live View ShootingN During Live View shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Cautions for using Live View shooting are on pages 123-124. The image’s field of view is approx. 100%. When you press the shutter button completely, the shutter will sound like it took two shots.
Page 111 B About the Information Display Each time you press the button, the information display will change. White balance Screen settings · h: Stills display · g: Exposure simulation · e: Movie display Picture Style AF mode · : Quick mode ·...
Page 112: Shooting Function Settings
Shooting Function SettingsN As with normal shooting through the viewfinder, while the Live View image is displayed, you can still use the camera buttons to change settings and playback images. The metering mode is fixed to evaluative metering for Live View shooting.
Page 113: Menu Function Settings
Menu Function SettingsN During the Live View display, you can still set the menu options. Live View functions are listed below. Grid display With [Grid 1 ] or [Grid 2 check the camera tilt before shooting. Silent shooting • Mode 1 The shooting operation noise is quieter than with normal shooting through the viewfinder.
Page 114: Movie Recording Size
If you use flash, the same operation as the setting [Disable] will take effect even if you had set it to [Mode 1] or [Mode 2]. When using a non-Canon flash unit, set it to [Disable]. The flash will not fire if it is set to [Mode 1] or [Mode 2].
Page 115: Using Af To Focus
Using AF to Focus Selecting the AF Mode The AF modes available are [Quick mode], [Live mode] (p.117), and [Liveu mode] (face detection, p.118). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.122).
Page 116: Take The Picture
Using AF to Focus AF point Magnifying frame You cannot take a picture during autofocusing. Take the picture while the Live View image is displayed. Autofocus will not work with the release button on Remote Switch RS- 80N3 nor Timer Remote Controller TC-80N3 (both sold separately). Focus the subject.
Page 117: Live Mode
Live Mode: The image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode. Also, achieving focus may be more difficult than with the Quick mode. AF point Move the AF point.
Page 118 Using AF to Focus Liveu (Face Detection) Mode: With the same AF method as the Live mode, human faces are detected and focused. Have the target person face the camera. Point the camera toward the subject. When a face is detected, a frame will appear over the face to be focused.
Page 119: Manual Focusing
Using AF to Focus If the focus is way off, face detection will not be possible. If the lens enables manual focusing even while the lens focus mode switch is set to <f>, turn the focusing ring to attain rough focus. The face will then be detected and ...
Page 120 Using AF to Focus Live Mode and Liveu (Face Detection) Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the button will focus again. The image brightness may change during and after the AF operation.
Page 121 Using AF to Focus Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing.
Page 122: Focusing Manually
Focusing Manually You can magnify the image and focus precisely manually. Magnifying frame AE lock Magnified area position Magnification Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Move the magnifying frame. Use <9> to move the magnifying frame to the position where you want to focus.
Page 123 Live View Shooting Cautions Notes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used.
Page 124 Live View Shooting Cautions Notes About the Shooting Results When you shoot with the Live View function at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality.
Page 125: Shooting Movies
Shooting Movies The Live View image can be recorded to the card as a movie. You can shoot a movie with auto exposure, shutter-priority AE, aperture-priority AE, or manual exposure. The movie recording format will be MOV. Cards which can record movies When shooting movies, use a large-capacity card having a read/write speed of at least 8 MB/sec.
Page 126: Preparing To Shoot Movies
k Preparing to Shoot Movies Set the camera to record the Live View image as a movie. To shoot still photos, see pages 107 and 136. Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func. set.], then press <0>. Enable movie shooting.
Page 127 About [Screen settings] You can select the LCD monitor’s image brightness. Stills displayh / Exposure simulationg Set this for shooting still photos. See page 109. Movie displaye Geared for movies, the Live View image will closely reflect the brightness level of the image you capture. The shooting coverage will also correspond to the aspect ratio of the movie-recording size which was set.
Page 128: Shooting Movies
k Shooting Movies Auto Exposure Shooting When the shooting mode is set to <1>, <C>, <d>, or <F>, auto exposure control will take effect to suit the scene’s brightness. Auto exposure control will be the same for all shooting modes. Recording movie Movie microphone Set the Mode Dial to <1>, <C>,...
Page 129: Shutter-Priority Ae Shooting
Shutter-priority AE Shooting When the shooting mode is set to <s>, you can manually set the shutter speed for movie shooting. The ISO speed and aperture will be set automatically to obtain a correct exposure. Shutter speed Changing the shutter speed during movie shooting is not recommended since variations in the exposure will be recorded.
Page 130: Aperture-Priority Ae Shooting
k Shooting Movies Aperture-priority AE Shooting When the shooting mode is set to <f>, you can manually set the aperture for movie shooting. The ISO speed and shutter speed will be set automatically to obtain a correct exposure. Aperture Changing the aperture during movie shooting is not recommended since changes in the exposure will be recorded.
Page 131: Manual Exposure Shooting
Notes for auto exposure, shutter-priority AE, and aperture-priority AE shooting During movie shooting, you can lock the exposure (AE lock) by pressing the <A> button (p.98). When applying AE lock during movie shooting, you can cancel it by pressing the <S> button (except in 1/C modes).
Page 132 k Shooting Movies With manual exposure shooting, AE lock and exposure compensation cannot be set. Changing the shutter speed or aperture during movie shooting is not recommended since variations in the exposure will be recorded. When shooting a movie of a moving subject, a shutter speed of 1/30 sec. to 1/125 sec.
Page 133 About the ISO speed during manual exposure The ISO speed can be set to [Auto] (A) or set within ISO 100-6400 in 1/3-stop increments. If the ISO speed is set to [Auto] (A), the ISO speed will be set automatically within ISO 100-6400. ([8C.Fn I -3: ISO expansion] (p.193) setting will not take effect.) With [8C.Fn I -3: ISO expansion] set to [1: On], you can manually set the ISO speed within ISO 100-12800 (H1).
Page 134 k Shooting Movies Notes for movie shooting A single movie file will be recorded for each movie shot. During movie shooting, the top, bottom, left, and right parts of the screen will have a semi-transparent mask. The image area surrounded by the mask is what will be recorded in the movie.
Page 135 B About the Information Display Each time you press the button, the information display will change. White balance Screen settings · h: Stills display · g: Exposure simulation · e: Movie display Picture Style AF mode · : Quick mode ·...
Page 136 k Shooting Movies Taking Still Photos During Movie Shooting The still photo will record the entire screen including the semi- transparent mask. The still photo will be taken at the exposure setting displayed when you press the shutter button halfway. If the still photo is shot during movie shooting in shutter-priority AE, aperture-priority AE, or manual exposure mode, the still photo will be taken with the exposure setting set for the movie.
Page 137: Shooting Function Settings
ISO speed for still photos during movie shooting Shooting Mode ISO Speed Auto 1, C, d, F Auto s, f Auto Manual Regarding [8C.Fn I -3: ISO expansion], see page 193. Shooting Function Settings As with normal shooting through the viewfinder, during movie shooting, you can still use the camera buttons to change function settings and execute playback.
Page 138: Menu Function Settings
Menu Function Settings During movie shooting, you can still set the menu options. Movie shooting functions are listed below. Grid display With [Grid 1 ] or [Grid 2 check for any camera tilt before shooting. Silent shootingN Set when shooting a still photo. See page 113. This will also work with still photo shooting during movie shooting (p.136).
Page 139: Recording Size
Movie recording size You can select the movie’s image size [****x****] and frame rate [ (frames recorded per second). The automatically depending on the [6 Video system] setting. • Image size [1920x1080] : Full HD (Full High-Definition) recording quality. [640x480] : Standard-definition recording quality.
Page 140: Sound Recording
3 Menu Function Settings Sound recording Level meter [Auto] : The sound recording level will be adjusted automatically. The auto level control will work automatically to suit the sound volume. [Manual] : For advanced users. You can adjust the sound recording level to one of 64 levels.
Page 141 Movie Shooting Cautions Recording and Image Quality When you shoot movies at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. The Image Stabilizer may cause the total movie shooting time or the number of possible shots to decrease.
Page 142 Movie Shooting Cautions About the <E> icon and camera’s internal temperature increase When you shoot movies continuously for a long period or in high temperatures, the camera’s internal temperature may increase and the <E> icon may appear on the screen. Note that if you shoot movies for a long period in high temperatures, the <E>...
Page 143: Image Playback
Image Playback This chapter explains how to playback and erase photos and movies, how to display images on a TV screen, and other playback-related functions. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.
Page 144: Image Playback
x Image Playback Single Image Display Single image display Histogram display Playback the image. Press the <x> button. The last captured image or last image viewed will appear. Select the image. To playback images starting with the last image, turn the <5> dial counterclockwise.
Page 145: B Shooting Information Display
B Shooting Information Display Exposure compensation amount Flash exposure compensation amount Aperture Shutter speed/ Recording time Metering mode Shooting mode/ Movie Color temperature if is set Image-recording quality/ Movie-recording format Movie-recording size Frame rate Playback number/ Total images recorded White balance * When you shoot in the RAW+JPEG mode, the JPEG image file size will be displayed.
Page 146: About The Histogram
x Image Playback About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [4 Histogram] menu. [Brightness] Display This histogram is a graph showing the distribution of the image’s brightness level.
Page 147: Hi Searching For Images Quickly
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. Turn on the index display. During image playback, press the ...
Page 148 x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, index display, and magnified view, you can turn the <6> dial to jump through the images. Jump method Image location Select the jump method. In the [4 Image jump w/6] menu, select the desired jump method from [1 image/10 images/100 images/...
Page 149: U/Y Magnified View
u/y Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. Magnified area position During the magnified view, you can turn the <5> (or <6>) dial to view another image at the same magnification and position (the display jumps according to the selected jump method).
Page 150: Rotating The Image
b Rotating the Image You can rotate the displayed image to the desired orientation. If you have set [5 Auto rotate] to [OnzD] (p.164) before taking vertical shots, you need not rotate the image as described above. If the rotated image is not displayed in the rotated orientation during image playback, set the [5 Auto rotate] menu to [OnzD].
Page 151: Enjoying Movies
k Enjoying Movies Basically, there are the following three ways to playback the movies you shot. Playback on a TV set Movies on a card can be played only by devices compatible with MOV files. Since hard disk recorders do not have an HDMI IN terminal, the camera cannot be connected with an HDMI cable.
Page 152 k Enjoying Movies Playback and Editing with a Personal Computer (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser) To have the movie playback smoothly on a personal computer, the personal computer must be a high-performance model. Regarding the hardware requirements for ZoomBrowser EX/ImageBrowser, see the PDF file instruction manual.
Page 153: Playing Movies
k Playing Movies Speaker Playback the image. Press the <x> button to display the image. Select a movie. Turn the <5> dial to select the image. During the single-image display, the <1s> icon displayed on the upper left indicates that it is a movie. During the index display, the perforation on the left edge of the image indicates that it is a movie.
Page 154 k Playing Movies Item Exit Returns to the single-image display. Play Pressing <0> toggles between play and stop. Adjust the slow motion speed by turning the <5> dial. The Slow motion slow-motion speed is indicated on the upper right. First frame Displays the movie’s first frame.
Page 155: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. Quantity of images for playback Item All images All the still photos and movies in the card will be played back. Still photos and movies in the selected folder will be played nFolder back.
Page 156: Start The Slide Show
3 Slide Show (Auto Playback) Play time During pause, you can turn the <5> or <6> dial to view another image. During the slide show, auto power off will not work. The display time may vary depending on the image. To view the slide show on a TV set, see page 157-158.
Page 157: Viewing The Images On Tv
Viewing the Images on TV You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV set, part of the image displayed might be cut off.
Page 158 Viewing the Images on TV Viewing on HD (High-Definition) TV Sets The HDMI Cable HTC-100 (sold separately) is required. * By pressing the button, you can change the display format. Do not connect any other device to the camera’s <D> terminal.
Page 159: K Protecting Images
K Protecting Images Protecting the image prevents it from being erased accidentally. Image protect icon If you format the card (p.43), the protected images will also be erased. Once an image is protected, it cannot be erased by the camera’s erase function.
Page 160: L Erasing Images
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.159) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect it.
Page 161 3 Erasing All Images in a Folder or Card You can erase all the images in a folder or card at one time. When the [3 Erase images] menu is set to [All images in folder] or [All images on card], all the images in the folder or card will be erased. Select [Select and erase images].
Page 162: Changing Image Playback Settings
Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness The LCD monitor’s brightness is adjusted automatically for optimum viewing. You can set the automatic adjustment’s brightness level (brighter or darker) or adjust the brightness manually. Automatic adjustment While [Auto] is set, be careful not to obstruct the round, external light sensor (left of the power switch) with your finger, etc.
Page 163: Setting The Image Review Time
3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off]. If [Hold] is set, the image will be displayed until the auto power off time elapses.
Page 164: Auto Rotation Of Vertical Images
Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed. OnzD The vertical image is automatically rotated on both the camera’s LCD monitor and on the personal computer.
Page 165: Sensor Cleaning
In case visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately.
Page 166: Automatic Sensor Cleaning
f Automatic Sensor Cleaning Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not be aware of this operation.
Page 167: Appending Dust Delete Data
Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots.
Page 168: Photograph A Solid-White Object
3 Appending Dust Delete DataN About the Dust Delete Data After the Dust Delete Data is obtained, it is appended to all the JPEG and RAW images captured thereafter. Before an important shoot, you should update the Dust Delete Data by obtaining it again. To erase dust spots automatically with the bundled software, see the Software Instruction Manual in the CD-ROM.
Page 169: Manual Sensor Cleaning
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera.
Page 170 Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor. If smear that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 171: Printing Images And Transferring Images To A Computer
Printing Images and Transferring Images to a Computer Printing (p.172) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. Digital Print Order Format (DPOF) (p.181) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing...
Page 172: Preparing To Print
Preparing to Print The direct printing procedure is done entirely with the camera while looking at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power switch to <2>. Set up the printer. For details, see the printer’s instruction manual.
Page 173 PictBridge Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer.
Page 174: Wprinting
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon Print setting screen The paper size, type, and layout you have set are displayed. * Depending on the printer, settings such as the date and file number imprinting and trimming might not be available.
Page 175 The paper type screen will appear. Select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used.
Page 176: Set The Printing Effects
wPrinting Item The image will be printed according to the printer’s standard colors. The image’s Exif data is used to make automatic corrections. EOff No automatic correction will be performed. The image will be printed with higher saturation to produce EVivid more vivid blues and greens.
Page 177: Start Printing
With Easy printing, you can print another image with the same settings. Just select the image and press the < printing, the number of copies will always be 1. (You cannot set the number of copies.) Also, any trimming (p.179) will not be applied. The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer.
Page 178 wPrinting e Adjustment of Printing Effects Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast. With the Adjust levels screen displayed, press the button to change the position of the <...
Page 179: Trimming The Image
Trimming the Image Tilt correction On the print setting screen, select [Trimming]. Set the trimming frame size, position, and proportion. The image area within the trimming frame will be printed. The trimming frame’s vertical-to-horizontal proportion can be changed with [Paper settings]. Changing the trimming frame size When you press the ...
Page 180: Error Messages
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately.
Page 181: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Print type Select [Print order].
Page 182 W Digital Print Order Format (DPOF) Standard Prints one image on one sheet. Index Print type Both Date [On] imprints the recorded date on the print. File number [On] imprints the file No. on the print. Even if [Date] and [File No.] are set to [On], the date or file No. might not be imprinted depending on the print type setting and printer model.
Page 183: Print Ordering
Print Ordering Sel.Image Quantity Total images selected Check mark Index icon Select [Byn] and select the folder. A print order for 1 copy of all the images in the folder will be placed. If you select Clear all and a folder, the print order for all the images in the folder will be canceled.
Page 184: Direct Printing With Dpof
WDirect Printing with DPOF Preparing to print. See page 172. Follow the “Connecting the Camera to a Printer” procedure up to step 5. Under the [ ] tab, select [Print order]. Select [Print]. [Print] will be displayed only if the camera is connected to the printer and printing is possible.
Page 185: Transferring Images To A Personal Computer
d Transferring Images to a Personal Computer By connecting the camera to a personal computer, you can transfer images from the camera’s card by operating the camera. This feature is called direct image transfer. Before connecting the camera to a personal computer, be sure to install the provided software (EOS DIGITAL Solution Disk on CD-ROM) in the personal computer.
Page 186: Transferring Images To A Personal Computer
d Transferring Images to a Personal Computer If the [EOS Utility] screen does not appear, see Software Instruction Manual in the CD-ROM. Before disconnecting the cable, turn off the camera. Pull out the cable by grasping the plug (instead of the cord). Transferring Images to a Personal Computer The images sent to the personal computer will be saved in the [My Pictures] folder or [Pictures] folder in subfolders organized according...
Page 187 Options other than [All images] are explained below. To start the image transfer, press the <l> button. New images Images which have not yet been transferred to the personal computer will be selected by the camera automatically and transferred. Transfer order images You select the images and they are transferred to the personal computer in a batch.
Page 188: Selecting The Images To Be Transferred
d Transferring Images to a Personal Computer 3 Selecting the Images to be Transferred Sel.Image Select [Byn] and select the folder. All the images in the folder will then be included in the transfer order. If you select Clear all and a folder, the transfer order for all the images in the folder will be canceled.
Page 189: Customizing The Camera
Customizing the Camera With Custom Functions, you can change the camera functions according to your preference. Also, the current camera settings can be saved under the Mode Dial’s <w>, <x>, and <y> positions. The features explained in this chapter can be set and used in the following shooting modes: d, s, f, a,...
Page 190: Setting Custom Functions
Setting Custom FunctionsN Custom Function No. Clearing All Custom Functions In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the Custom Function settings. Even after all the Custom Functions are cleared, the setting for [8C.Fn IV - 5: Focusing Screen] will remain unchanged.
Page 191: Custom Functions
Custom FunctionsN C.Fn I: Exposure Exposure level increments ISO speed setting increments ISO expansion Bracketing auto cancel Bracketing sequence Safety shift Flash sync. speed in Av mode C.Fn II: Image Long exposure noise reduction High ISO speed noise reduction Highlight tone priority Auto Lighting Optimizer The [z LV shooting] column assumes that [Screen settings] has been set to [Stills display/Exposure simulation].
Page 192 3 Custom FunctionsN C.Fn III: Autofocus/Drive Lens drive when AF impossible Lens AF stop button function AF point selection method Superimposed display AF-assist beam firing Mirror lockup AF point area expansion AF Microadjustment C.Fn IV: Operation/Others Shutter button/AF-ON button AF-ON/AE lock button switch Assign SET button Dial direction during Tv/Av Focusing screen...
Page 193: Custom Function Settings
Custom Function SettingsN C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
Page 194 3 Custom Function SettingsN C.Fn I -5 Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 0, -, + 1: -, 0, + 0 : Standard exposure - : Decreased exposure - : Blue bias + : Increased exposure + : Amber bias C.Fn I -6 Safety shift...
Page 195: C.fn Ii: Image
C.Fn II: Image C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec.
Page 196: Auto Lighting Optimizer
3 Custom Function SettingsN C.Fn II -3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, noise in the shadow areas may be slightly more than usual.
Page 197: C.fn Iii: Autofocus/Drive
C.Fn III: Autofocus/Drive C.Fn III -1 Lens drive when AF impossible If autofocus is executed, but focus cannot be achieved, the camera can either keep trying to focus or stop. 0: Focus search on 1: Focus search off Prevents the camera from becoming grossly out of focus as it attempts to focus again.
Page 198 3 Custom Function SettingsN C.Fn III -3 AF point selection method 0: Normal Press the <S> button, then use <9> or <6/5> dial to select an AF point. 1: Multi-controller direct Without pressing the <S> button first, you can just use the <9> to select the desired AF point.
Page 199 C.Fn III -6 Mirror lockup 0: Disable 1: Enable Prevents camera vibrations caused by the reflex mirror action which can disturb shooting with super telephoto lenses or close-up (macro) shooting. See page 101 for the mirror lockup procedure. C.Fn III -7 AF point area expansion 0: Disable 1: Enable...
Page 200 3 Custom Function SettingsN C.Fn III -8 AF Microadjustment Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved. AF adjustment cannot be done during Live View shooting in Live and Liveu modes. With setting 1 or 2 selected, press the ...
Page 201: C.fn Iv: Operation/Others
C.Fn IV: Operation/Others C.Fn IV -1 Shutter button/AF-ON button 0: Metering + AF start 1: Metering + AF start/AF stop During autofocusing, you can press the button to stop the autofocusing. 2: Metering start/Metering + AF start This is useful for subjects which keep moving and stopping repeatedly. In the AI Servo AF mode, you can press the ...
Page 202 3 Custom Function SettingsN C.Fn IV -3 Assign SET button You can assign a frequently-used function to <0>. When the camera is ready to shoot, you can press <0>. 0: Normal (disabled) 1: Image quality Press <0> to display the image-recording quality setting screen on the LCD monitor.
Page 203 C.Fn IV -5 Focusing Screen If you change the focusing screen, change this setting to match the focusing screen type. This is to obtain the correct exposures. 0: Eg-A 1: Eg-D 2: Eg-S About focusing screen characteristics Eg-A: Standard Precision Matte Standard focusing screen that comes with the camera.
Page 204 3 Custom Function SettingsN C.Fn IV -6 Add original decision data 0: Off 1: On Data for verifying whether the image is original or not is appended to the image automatically. When the shooting information of an image appended with the verification data is displayed (p.145), the <L> icon will appear.
Page 205: Registering My Menu
Registering My MenuN For faster access, you can register up to six menus and Custom Functions whose settings you change frequently. About My Menu settings Sort You can change the order of the registered menu items in My Menu. Select [Sort] and select the menu item whose order you want to change.
Page 206: Register Camera User Settings
w Register Camera User SettingsN Under the Mode Dial’s <w>, <x>, and <y> positions, you can register most of the current camera settings including your preferred shooting mode, menus, Custom Function settings, etc. About Camera user setting’s [Clear settings] In step 2, if you select [Clear settings], the respective Mode Dial position will revert to the default setting effective before you registered the camera settings.
Page 207: Shooting Functions
Settings Registered Shooting functions Shooting mode + setting, ISO speed, AF mode, AF point, Metering mode, Drive mode, Exposure compensation amount, Flash exposure compensation amount Menu Functions Quality, Beep, Shoot w/o card, Review time, Peripheral illumination correction Exposure compensation/AEB, White balance, Custom WB, WB SHIFT/BKT, Color space, Picture Style Highlight alert, AF point display, Histogram, Slide show, Image jump w/6...
Page 209: Reference
Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
Page 210: B Checking Camera Settings
B Checking Camera Settings When the camera is ready to shoot, press the button and “Camera settings” and “Shooting functions” screens will appear. When “Shooting functions” is displayed, you can set the shooting functions while looking at the LCD monitor. Camera Settings Auto power off (p.44) * This icon is displayed only when the transfer of some images failed while using...
Page 211 Shooting Functions Aperture Shutter speed Exposure level/ AEB range Shooting mode AF point Image-recording quality Quick Control icon Battery check White balance correction When you press <9> straight down, the Quick Control screen appears (p.38). If you press the <m>, <o>, <n>, or <S> button, the setting screen will appear on the LCD monitor and you can turn the <6>...
Page 212: Checking The Battery Information
Checking the Battery Information You can check the battery’s condition on the LCD monitor. The Battery Pack LP-E6 has a unique serial No., and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remaining capacity and operation history.
Page 213: Registration
Registering the Battery to the Camera You can register up to six Battery Pack LP-E6’s to the camera. To register multiple battery packs to the camera, do the procedure below for each battery pack. Battery registration is not possible if size-AA/LR6 batteries are in the Battery Grip BG-E6 or if you use the AC Adapter Kit ACK-E6.
Page 214 3 Checking the Battery Information Labeling the Serial No. on the Battery Affixing the serial No. onto all the registered Battery Pack LP-E6’s with a label makes it convenient. Serial No. Do not affix the label on any part other than as shown in the illustration in step 2.
Page 215 Checking the Remaining Capacity of a Registered Battery Pack You can check the remaining capacity of any battery pack (even while not installed) and also when it was last used. Serial No. Date last used Remaining capacity Deleting the Registered Battery Pack Information Select [Delete battery info.].
Page 216: Using A Household Power Outlet
Using a Household Power Outlet With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. DC coupler cord hole Do not connect or disconnect the power cord while the camera’s power switch is set to <1>...
Page 217: Replacing The Date/Time Battery
Replacing the Date/Time Battery The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If you turn on the power and the date/ time is reset, replace the back-up battery with a new CR1616 lithium battery as described below.
Page 218: Function Availability Table
Function Availability Table o: Set automatically k: User selectable Function JPEG Quality RAW+JPEG Auto ISO speed Manual Standard Portrait Landscape Picture Neutral Style Faithful Monochrome User Defined Auto WB Preset WB Custom WB White Color temperature balance setting WB correction WB bracketing sRGB Color...
Page 219: External Flash
o: Set automatically k: User selectable Function One-Shot AI Servo AI Focus Auto AF point selection Manual Quick mode Live mode Live mode Evaluative Partial Metering mode Spot Center-weighted average Program shift Exposure compensation Exposure AE lock Depth-of-field preview Single shooting Continuous shooting 10 sec.
Page 220: Menu Settings
Menu Settings 1 Shooting 1 (Red) Quality Beep Shoot w/o card Review time Peripheral illumination correction 2 Shooting 2 (Red) Exposure compensation/AEB White balance Custom WB WB SHIFT/BKT Color space Picture Style Dust Delete Data 3 Playback 1 (Blue) Protect images Rotate Erase images Print order...
Page 221 4 Playback 2 (Blue) Highlight alert AF point display Histogram Slide show Image jump w/6 5 Set-up 1 (Yellow) Auto power off Auto rotate Format File numbering Select folder WFT settings Recording function+ media select 6 Set-up 2 (Yellow) LCD brightness Date/Time Language Video system...
Page 222: Custom Function (C.fn)
Menu Settings 7 Set-up 3 (Yellow) Battery info. INFO. button External Speedlite control Camera user setting Clear settings Firmware Ver. 8 Custom Functions (Orange) C.Fn I : Exposure C.Fn II : Image C.Fn III : Autofocus/ Drive C.Fn IV : Operation/ Others Clear all Custom Functions (C.Fn)
Page 223: Troubleshooting Guide
Canon Service Center. Power-Related Problems The battery cannot be recharged with the battery charger provided. Do not recharge any battery pack other than genuine Canon Battery Pack LP-E6. The charger’s lamp blinks at high speed. If there is a problem with the battery charger or battery pack or if...
Page 224 Troubleshooting Guide The access lamp still blinks even when the power switch is set to <2>. If the power is cut off while an image is being recorded to the card, the access lamp will light/blink for a few sec. When the image recording is completed, the power will turn off automatically.
Page 225 No images can be shot or recorded. The card is not properly inserted (p.29). If the card is full, replace the card or delete unnecessary images to make room (p.29, 160). If you try to focus in One-Shot AF mode while the focus confirmation light <o>...
Page 226 The flash does not fire. Make sure the flash (or PC sync cord) is securely attached to the camera. If you use a non-Canon flash with Live View shooting, set [Silent shoot.] to [Disable] (p.104). The flash always fires at full output.
Page 227 Live View shooting is not possible. For Live View shooting, use a memory card (a hard disk-type card is not recommended). A hard disk-type card requires a lower temperature range for operation than normal memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card’s hard disk.
Page 228 Troubleshooting Guide During movie shooting, the exposure becomes bright momentarily. Changing the aperture during movie shooting is not recommended since changes in the exposure, due to the drive of the lens aperture, will be recorded. If you use a lens whose aperture changes while you zoom, you should not zoom while shooting a movie.
Page 229 Display & Operation Problems The LCD monitor does not display a clear image. If dust is adhering to the LCD monitor, wipe its surface with a lens cloth or soft cloth. In low or high temperatures, the LCD monitor display may seem slow or might look black.
Page 230 Troubleshooting Guide No image appears on the TV screen. Make sure the stereo video cable or HDMI cable’s plug is connected all the way in (p.157,158). Set the video OUT format (NTSC/PAL) to the same video format as the TV (p.221). Use the stereo video cable that came with the camera (p.157).
Page 231: Error Codes
Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or have the camera or lens checked or repaired. (p.13,16) There is a problem with the card. Replace the card.
Page 232: System Map
System Map Eyepiece Extender EP-EX15 ST-E2 Rubber Frame Eb Bundled E-series Dioptric Accessories Adjustment Lenses Eyecup Eb Wide Strap EW-EOS5DMKII Angle Finder C Battery Charger LC-E6 or LC-E6E Focusing Screen Eg-D Eg-S Car Battery Cable CB-570 Car Battery Charger CBC-E6 270EX 430EX II 580EX II Macro Ring Lite Focusing...
Page 233 Timer Remote Remote Controller Switch Controller TC-80N3 RS-80N3 Stereo Video Cable STV-250N EOS DIGITAL Software Instruction Solution Disk Manual Interface Cable IFC-200U Interface Cable IFC-500U Original Data Security Kit Card reader OSK-E3 CF card PCMCIA adapter Wireless Remote Remote Controller Controller LC-5 RC-6/RC-5...
Page 234: Specifications
Digital, single-lens reflex, AF/AE camera Type I or II CF card, UDMA-compatible Approx. 36 x 24 mm Canon EF lenses (except EF-S lenses) (The effective lens focal length is the same as indicated on the lens) Canon EF mount CMOS sensor Approx.
Page 235 • Viewfinder Type: Eye-level pentaprism Coverage: Vertical/Horizontal approx. 98% Magnification: Approx. 0.71x (-1 m Eye point: Approx. 21 mm (From eyepiece lens center at -1 m Built-in dioptric adjustment: -3.0 - +1.0 m Focusing screen: Interchangeable (2 types sold separately), Eg-A standard focusing screen provided Mirror: Quick-return type...
Page 236 RAW: Approx. 13 shots (Approx. 14 shots), RAW+JPEG Large/Fine: Approx. 8 shots (Approx. 8 shots) * Figures are based on Canon’s testing standards (ISO 100 and Standard Picture Style) using a 2GB card. * Figures in parentheses apply to an Ultra DMA (UDMA) 2GB card based on Canon’s testing standards.
Page 237 • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 640x480 (SD) * 30p: 29.97 fps, 25p: 25.0 fps, 24p: 23.976 fps File size: 1920x1080 (30p/25p/24p): Approx.
Page 238 Specifications • Image Playback Image display formats: Single, Single + Info (Image-recording quality, shooting Zoom magnification: Image browsing methods: Highlight alert: Movie playback: • Direct Printing Compatible printers: Printable images: Print ordering: • Customization Custom Functions: Camera user settings: My Menu registration: •...
Page 239 Battery information: Remaining capacity, Shutter count, and Recharge performance displayed Battery life: With viewfinder shooting: (Based on CIPA At 23°C/73°F, approx. 850 shots. At 0°C/32°F, approx. testing standards) 750 shots. With Live View shooting: At 23°C/73°F, approx. 200 shots. At 0°C/32°F, approx. 180 shots.
Page 240 All specifications above are based on Canon’s testing standards. The camera’s specifications and exterior are subject to change without notice. If a problem occurs with a non-Canon lens attached to the camera, consult the respective lens maker. Charger dedicated to the Battery Pack LP-E6 Approx.
Page 241 Trademarks Adobe is a trademark of Adobe Systems Incorporated. CompactFlash is a trademark of SanDisk Corporation. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other countries.
Page 242 Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet.
Page 243 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
Page 244 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600 This Class B digital apparatus complies with Canadian ICES-003.
Page 245 4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury. 6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.
Page 246 Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery...
Page 247 MEMO...
Page 248 MEMO...
Page 249 MEMO...
Page 250 MEMO...
Page 251 MEMO...
Page 252 MEMO...
Page 253 MEMO...
Page 254: Index
Index Index 10-sec. or 2-sec. delay ...86 1920x1080 ...139 1st-curtain sync...105 ...139 4- or 9-image index display...147 640x480 ...139 AC Adapter Kit ...216 Access lamp ...30 Adobe RGB...76 AE lock...98 AEB...97, 193, 194 Focusing AF Microadjustment...200 AF point expansion ...199 AF stop button ...197 AF-ON (AF start) button...35, 201 AI FOCUS (AI Focus AF)...80...
Page 255: Flash Control
FE lock ... 103 Flash control ... 105 Flash exposure compensation ... 103 Flash sync (1st/2nd curtain)... 105 Flash-sync speed... 104, 194 Non-Canon flash units ... 104 Flash exposure compensation ... 103, 193, 211 Flash mode... 105 Flash-sync contacts... 16 Focus confirmation light ...
Page 256 Index Focusing AF mode...78, 211 AF point display...145 AF point selection...81, 198, 211 AF-assist beam ...198 Beeper...48, 79, 220 Difficult-to-focus subjects...84, 121 Live View shooting ...115, 122 Manual focusing ...84, 122 Out of focus ...49, 84, 121 Recompose ...50 Focusing screen ...203 Folder Create/Select...72 Format (CF card initialization)...43 Frame rate ...139...
Page 257: Attaching/Detaching
LCD monitor...13 Brightness adjustment ...162 Image playback ...143 Menu settings ...40, 220 Shooting functions ...211 LCD panel ...18 Illumination ...99 Lens ...21, 31 Attaching/Detaching ...31, 32 Lock release ...32 Peripheral illumination correction...70 Live View shooting ...107 Grid display...113 Information display ...111 Live face detection mode...118 Live mode ...117 Manual focusing ...122...
Page 258 Index Natural/M (printing) ...176 Neutral ...60 Noise reduction...195 Nomenclature ...16 Non-Canon flash units ...104 Normal (Image-recording quality) ...55 NR (printing) ...176 NTSC ...139, 221 Number ...74 ONE SHOT (One-Shot AF)...79 One-Shot AF...79 Original decision (image verification) data ...204 P (Program AE) ...88 PAL ...139, 221...
Page 259 Safety shift ...194 Safety warnings ...242 Saturation...61, 178 Self-timer...86 Sensor cleaning ...165 Sepia (Monochrome) ...62 SET button ...40 Sharpness...61 Shoot w/o card ...29 Shooting information display...111, 135, 145 Shooting mode...20 Aperture-priority AE ...92, 130 Bulb ...99 Creative Auto...51 Full Auto ...48 Manual exposure ...94, 131 Program AE ...88 Shutter-priority AE ...90, 129...
Page 260 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. U.S.A. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON CANADA INC. HEADQUARTERS CANADA 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC.

This manual is also suitable for:

5d mark ii

Canon EOS 5D Mark II Instruction Manual

Getting Started

Basic Shooting

Image Settings

Advanced Operations

Shooting Movies

Sensor Cleaning

Printing Images and Transferring Images to a Computer

Customizing the Camera

Reference

Quick Links

Related Manuals for Canon EOS 5D Mark II

Summary of Contents for Canon EOS 5D Mark II