Page 1 INSTRUCTION This manual is for the EOS 5D Mark II installed with MANUAL firmware Version 2.0.0 or later.
Page 2 Thank you for purchasing a Canon product. The EOS 5D Mark II is a high-performance, digital SLR camera with a full-frame (approx. 36mm x 24mm) CMOS sensor with 21.10 effective megapixels. Other features include DIGIC 4, high-precision and high- speed, 9-point AF (plus six Assist AF points); approx. 3.9 fps continuous shooting;...
Page 3: Item Check List
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack LP-E6 Battery Charger Camera (with protective cover) LC-E6/LC-E6E* (with eyecup and body cap) Wide Strap Interface Cable Stereo Video Cable EW-EOS5DMKII...
Page 4: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> : Indicates the Multi-controller. <0> : Indicates the setting button. , 8: Indicates that the respective function remains 0, 9, active for 4 sec., 6 sec., 10 sec., or 16 sec.
Page 5: Table Of Contents
Chapters For first-time DSLR users, chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Camera basics. Getting Started Basic Shooting Fully automatic shooting. Image Settings Setting the AF and Drive Modes Advanced Operations Shooting features for specific types of subjects. Live View Shooting Shoot still photos while viewing the LCD monitor.
Page 6 Contents Introduction Item Check List....................3 Conventions Used in this Manual ..............4 Chapters ......................5 Index to Features .................... 10 Handling Precautions ..................12 Quick Start Guide .................... 14 Nomenclature ....................16 Getting Started Charging the Battery ..................24 Installing and Removing the Battery..............
Page 7 Contents Image Settings Setting the Image-recording Quality..............54 i: Setting the ISO Speed................57 A Selecting a Picture Style ................59 A Customizing a Picture Style ..............61 A Registering a Picture Style...............63 B: Setting the White Balance ...............65 O Custom White Balance .................66 P Setting the Color Temperature ...............67 u White Balance Correction ................68 Lens Peripheral Illumination Correction ............70...
Page 8 Contents R Remote Control Shooting ................102 D Flash Photography ..................103 Setting the Flash ................... 105 Live View Shooting (Still photo shooting with the LCD monitor) A Preparing for Live View Shooting............108 A Live View Shooting.................. 110 Shooting Function Settings ................112 Menu Function Settings.................
Page 9 Contents Sensor Cleaning f Automatic Sensor Cleaning ..............166 Appending Dust Delete Data................167 Manual Sensor Cleaning................169 Printing Images and Transferring Images to a Computer 171 Preparing to Print ...................172 wPrinting......................174 Trimming the Image ..................179 W Digital Print Order Format (DPOF) ............181 Direct Printing with DPOF ................184 d Transferring Images to a Personal Computer..........185 Customizing the Camera...
Page 10: Index To Features
Index to Features Power Image improvement features • Auto Lighting Optimizer p.196 Battery • Lens peripheral illumination • Charging p.24 correction p.70 • Battery check p.28 • Noise reduction • Battery information check p.212 for long exposures p.195 Power outlet p.216 •...
Page 11 Index to Features Image playback Manual exposure p.94 Bulb p.99 Image review time p.163 Mirror lockup p.101 Single image display p.144 Quick Control screen p.38 • Shooting information Self-timer p.86 display p.145 Remote control p.102 Movie playback p.153 Index display p.147 Exposure adjustment Image browsing...
Page 12: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Page 13 Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction.
Page 14: Quick Start Guide
Quick Start Guide Insert the battery. (p.26) To charge the battery, see page 24. Attach the lens. (p.31) Align the red dot. Set the lens focus mode switch to <AF>. (p.31) Open the slot cover and insert a card. (p.29) Face the label side toward you and insert the end with the small holes into the camera.
Page 15 Quick Start Guide Set the Mode Dial to <1> (Full Auto). (p.48) All the necessary camera settings will be set automatically. Focus the subject. (p.35) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject.
Page 16: Nomenclature
Nomenclature For detailed information, reference page numbers are provided in parentheses (p.**). <o> AF mode <n> Metering mode selection/ selection/Drive mode White balance selection button (p.95/65) selection button (p.78/85) LCD panel (p.18) <m> ISO speed setting/Flash exposure EF lens mount index (p.31) compensation button (p.57/103) Flash-sync contacts (p.103)
Page 17 Nomenclature AF start button <9> Multi-controller (p.36) (p.35,79,110) Dioptric adjustment knob (p.34) <A/I> AE lock/ Speaker (p.153) FE lock button/Index/ Reduce button Eyecup (p.100) (p.98/103/147/149,179) Viewfinder eyepiece <S/u> <A/l> Live View AF point selection/ shooting/Print/Share button Magnify button (p.109/177,186) (p.81/149,179) <M>...
Page 18: Lcd Panel
Nomenclature LCD Panel AF point selection ([ - - - ]) Shutter speed Card full warning (FuLL CF) Busy (buSY) Card error warning (Err CF) Image-recording quality (p.54) No card warning (no CF) Large/Fine Error code (Err) Large/Normal Cleaning image sensor (CLn) Medium/Fine Medium/Normal Aperture...
Page 19: Viewfinder Information
Nomenclature Viewfinder Information Spot metering circle Focusing screen AF points (Superimposed display) <g> ISO speed White balance correction <o> Focus < > Battery check confirmation light <A> AE lock/ Max. burst AEB in-progress <0> Monochrome <D> Flash-ready shooting Improper FE lock warning ISO speed <A>...
Page 20 Nomenclature Mode Dial Camera User Settings Most camera settings can be registered under w, x, or y (p.206). F : Bulb (p.99) a : Manual exposure (p.94) f : Aperture-priority AE (p.92) s : Shutter-priority AE (p.90) d : Program AE (p.88) Fully-Automatic Modes All you do is press the shutter button.
Page 21 Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery...
Page 22 Nomenclature Battery Charger LC-E6 Charger for Battery Pack LP-E6 (p.24). Power plug Battery pack slot Charge lamp This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
Page 23: Getting Started
Getting Started This chapter explains preparatory steps and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 24: Charging The Battery
Charging the Battery Remove the protective cover. Attach the battery. As shown in the illustration, attach the battery securely. To detach the battery, follow the above procedure in reverse. Recharge the battery. LC-E6 For LC-E6 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Page 25 Purchase a new battery. The charger cannot charge any battery other than Battery Pack LP-E6. Battery Pack LP-E6 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
Page 26: Installing And Removing The Battery
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack LP-E6 into the camera. Open the battery compartment cover. Slide the lever as shown by the arrow and open the cover. Insert the battery. Insert the end with the battery contacts.
Page 27: Turning On The Power
Turning on the Power <2> : The camera is turned off and does not operate. Set to this position when not using the camera. <1> : The camera turns on. <J> : The camera and <5> operate (p.37). About the Automatic Self-Cleaning Sensor Whenever you set the power switch to <1/J>...
Page 28: Checking The Battery Level
Turning on the Power Checking the Battery Level When the power switch is set to <1> or <J>, the battery level will be indicated in one of six levels: Icon Level (%) Indication 100 - 70 Sufficient battery level 69 - 50 Battery level exceeds 50% 49 - 20 Battery level below 50% 19 - 10 Battery level is low 9 - 1...
Page 29: Installing And Removing The Cf Card
Installing and Removing the CF Card Although the thickness is different between the two types of CF (CompactFlash) cards, either one can be inserted into the camera. Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used. Installing the Card Open the cover.
Page 30: Removing The Card
Installing and Removing the CF Card Removing the Card Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover. Access lamp Remove the card. Press the card ejection button. The card will come out. Close the cover.
Page 31: Attaching And Detaching A Lens
Attaching and Detaching a Lens Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. Attach the lens. Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place.
Page 32: Zoom
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by...
Page 33: About The Lens Image Stabilizer
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based on the EF24-105mm f/4L IS USM lens as an example. * IS stands for Image Stabilizer.
Page 34: Basic Operation
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended.
Page 35: Shutter Button
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the LCD panel and in the viewfinder (0).
Page 36 Basic Operation Using the Main Dial for Selecting After pressing a button, turn the <6> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <6> dial to set the desired setting. When the function turns off or if you press the shutter button halfway, the camera will be ready to shoot.
Page 37 Basic Operation Using the Quick Control Dial for Selecting Before using the < > dial, set the power switch to <J>. After pressing a button, turn the <5> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <...
Page 38: Using The Quick Control Screen
9 Using the Quick Control Screen The shooting settings are displayed on the LCD monitor where you can quickly select and set the functions. This is called the Quick Control screen. Display the Quick Control screen. Press <9> straight down. The Quick Control screen will appear.
Page 39 9 Using the Quick Control Screen Quick Control Screen Nomenclature Picture Style (p.59) Aperture (p.92) ISO speed (p.57) Highlight tone priority Shutter speed (p.90) (p.196) Exposure compensation/ AEB setting (p.97) Flash exposure compensation (p.103) Shooting mode (p.20) Metering mode (p.95) AF point (p.81) Image-recording Drive mode (p.85)
Page 40: Menu Operations
Menu Operations You can set various functions with the menus such as the image- recording quality, date/time, etc. While looking at the LCD monitor, you use the <M> button on the camera back and the <6> < > dials. <M> button LCD monitor <6>...
Page 41 3 Menu Operations Menu Setting Procedure Display the menu. Press the <M> button to display the menu. Select a tab. Turn the < > dial to select a tab. Select the desired item. Turn the < > dial to select the item, then press <...
Page 42: Before You Start
Before You Start 3 Setting the Interface Language Select [Language]. Under the [6] tab, select [Language] (the third item from the top), then press <0>. Set the desired language. Turn the <5> or <6> dial to select the language, then press <0>. The language will change.
Page 43: Formatting The Card
Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or personal computer, formatting the card with the camera is recommended. When the card is formatted, all images and data in the card will be erased.
Page 44: Set The Power-Off Time/Auto Power Off
Before You Start 3 Set the Power-off Time/Auto Power Off You can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.
Page 45 Before You Start Shooting Settings Image-Recording Settings AF mode One-Shot AF Quality ISO speed Auto AF point Automatic selection selection Picture Style Standard Color space sRGB q (Evaluative Metering mode metering) White balance Q (Auto) Drive mode u (Single shooting) WB correction Canceled WB-BKT...
Page 46: About Copyright Information
Before You Start 3 About Copyright InformationN If you use EOS Utility (provided software) to set your copyright information, the copyright information will be added to the image’s Exif information. With the camera, the copyright information can only be viewed or deleted. If your copyright information has not been set, it will be grayed out on the screen and unusable.
Page 47: Basic Shooting
Basic Shooting This chapter explains how to use the fully-automatic modes (1/C) on the Mode Dial for best results. With the fully-automatic modes (1/C), all you do is point and shoot and the camera sets everything automatically (p.218). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in the fully-automatic modes.
Page 48: Fully Automatic Shooting
1 Fully Automatic Shooting Set the Mode Dial to <1>. Aim any AF point over the AF point subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier.
Page 49 1 Fully Automatic Shooting The focus confirmation light <o> blinks and focus is not achieved. Aim the AF point over an area having good contrast between light and dark, then press the shutter button halfway (p.84). If you are too close to the subject, move away and try again.
Page 50: Full Auto Techniques
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture.
Page 51: C Creative Auto Shooting
C Creative Auto Shooting The <1> Full Auto mode takes care of everything, whereas the <C> Creative Auto mode enables you to easily change the picture’s brightness, depth of field, color tone (Picture Style), etc. The default settings are the same as the <1> (Full Auto) mode. * CA stands for Creative Auto.
Page 52: Battery Check
C Creative Auto Shooting Shutter speed and aperture ISO speed Possible shots Battery check Maximum burst (1) Blurring/sharpening the background If you move the index mark toward the left, the background will look more blurred. If you move it toward the right, the background will look more in focus.
Page 53: Image Settings
Image Settings This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Styles, white balance, color space, etc. In the fully-automatic modes (1/C), only the image- recording quality, lens peripheral illumination correction, and file numbering method can be set as explained in this chapter.
Page 54: Setting The Image-Recording Quality
Setting the Image-recording Quality You can select the pixel count and the image quality. There are six JPEG recording quality settings: 73, 83, 74, 84, 76, and 86. There are three RAW recording quality settings: 1, D1, and D2. RAW images must be processed with the provided software (p.56).
Page 55 A2 or larger Figures for the file size, possible shots, and maximum burst during continuous shooting are based on Canon’s testing standards (ISO 100 and Standard Picture Style) using a 2GB card. These figures will vary depending on the subject, card brand, ISO speed, Picture Style, Custom Functions, etc.
Page 56: Maximum Burst
3 Setting the Image-recording Quality About RAW The RAW image is the data output by the image sensor, converted to digital data and recorded on the card as is. You can select it from among 1, D1, or D2. “RAW” written in the text will refer to all three RAW settings: 1, D1, and D2.
Page 57: I: Setting The Iso Speed
3 Setting the Image-recording Quality The maximum burst is displayed even when a card is not in the camera. Make sure that a card is loaded before taking a picture. If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong], the maximum burst will be greatly reduced (p.195).
Page 58 i: Setting the ISO SpeedN ISO Speed Guide Shooting Situation ISO Speed Flash Range (No flash) L, 100 - 200 Sunny outdoors The higher the ISO speed, 400 - 800 Overcast skies, evening the farther the flash range will be. 1600 - 6400, H1, H2 Dark indoors or night If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the...
Page 59: A Selecting A Picture Style
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. In the <1> (Full Auto) mode, you cannot select the Picture Style. Press the <A> button. When the camera is ready to shoot, press the <A>...
Page 60: About The Symbols
A Selecting a Picture StyleN S Neutral This Picture Style is for users who prefer to process images with their personal computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their personal computer.
Page 61: A Customizing A Picture Style
A Customizing a Picture StyleN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see the next page. Press the <A> button. Select a Picture Style. Turn the <6>...
Page 62 A Customizing a Picture StyleN By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the modified Picture Style and then shoot. Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding...
Page 63: A Registering A Picture Style
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different.
Page 64 A Registering a Picture StyleN Set the parameter. Turn the <5> dial to adjust the parameter as desired, then press <0>. For details, see “Customizing a Picture Style” on pages 61-62. Press the <M> button to register the new Picture Style. The Picture Style selection screen will then reappear.
Page 65: B: Setting The White Balance
B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the white balance for each light source or set it manually by shooting a white object.
Page 66: O Custom White Balance
B: Setting the White BalanceN Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do this procedure under the actual light source to be used. Photograph a white object. The plain, white object should fill the spot metering circle.
Page 67: P Setting The Color Temperature
B: Setting the White BalanceN If the exposure obtained in step 1 is way off, a correct white balance might not be obtained. If the image was captured while the Picture Style was set to [Monochrome] (p.60), it cannot be selected in step 3. Instead of a white object, an 18% gray card (commercially available) can produce a more accurate white balance.
Page 68: White Balance Correction
u White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters.
Page 69: Wb Bracketing
u White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Page 70: Lens Peripheral Illumination Correction
Lens Peripheral Illumination Correction Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. This can be corrected. For JPEG images, lens light fall-off is corrected when the image is captured.
Page 71 3 Lens Peripheral Illumination Correction About the Lens Correction Data The camera already contains lens peripheral light correction data for about 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera.
Page 72: Creating And Selecting A Folder
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder Select [Select folder]. Under the [5] tab, select [Select folder], then press <0>.
Page 73: Selecting A Folder
3 Creating and Selecting a Folder Selecting a Folder With the Select folder screen Lowest file number displayed, turn the <5> dial to select Quantity of images in folder the desired folder, then press <0>. The folder where the captured images will be saved will be selected.
Page 74: File Numbering Methods
File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on a personal computer in this format: IMG_0001.JPG.
Page 75: Auto Reset
3 File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders.
Page 76: Setting The Color Space
Setting the Color SpaceN The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the fully-automatic modes (1/C), sRGB is set automatically. Select [Color space].
Page 77: Setting The Af And Drive Modes
Setting the AF and Drive Modes The viewfinder has 9 AF points. By selecting a suitable AF point, you can shoot with autofocus while framing the subject as desired. You can also select the AF mode and drive mode best matching the shooting conditions and subject.
Page 78: F: Selecting The Af Mode
f: Selecting the AF ModeN Select the AF mode suiting the shooting conditions or subject. In the fully-automatic modes (1/C), “AI Focus AF” is set automatically. On the lens, set the focus mode switch to <AF>. Press the <o> button. Select the AF mode.
Page 79: Ai Servo Af For Moving Subjects
f: Selecting the AF ModeN One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point which achieved focus will flash in red, and the focus confirmation light <o>...
Page 80: Assist Af Points
f: Selecting the AF ModeN When the AF point selection (p.81) is automatic, the camera first uses the center AF point to focus. Within the spot metering circle, there are six invisible Assist AF points ( in diagram) that function in the AI SERVO AF mode.
Page 81: S Selecting The Af Point
S Selecting the AF PointN Select one of the nine AF points to autofocus. Manual selection enables you to select one of the nine AF points. And automatic selection has the camera automatically select one of the nine AF points. In the fully-automatic modes (1/C), automatic AF point selection will be set automatically.
Page 82 S Selecting the AF PointN Selecting with the Dial When you turn the <6> or <5> dial, the AF point selection will change in the respective direction. When all AF points light up, automatic AF point selection will be set. When looking at the LCD panel to select the AF point, note the following: Automatic selection , center...
Page 83 S Selecting the AF PointN Lens’ Maximum Aperture and AF Sensitivity With lenses whose maximum aperture is larger than f/5.6 With the center AF point, cross-type AF (sensitive to both vertical and horizontal lines) is possible. The remaining eight AF points are horizontal-line sensitive or vertical-line sensitive.
Page 84: When Autofocus Fails
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following: Subjects difficult to focus Low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in low light Extremely backlit or reflective subjects (Example: Car with a reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.)
Page 85: Selecting The Drive Mode
i Selecting the Drive ModeN Single and continuous drive modes are provided. In the <1> (Full Auto) mode, single shooting is set automatically. Press the <o> button. Select the drive mode. While looking at the LCD panel, turn the <5> dial. u : Single shooting When you press the shutter button completely, one shot will be taken.
Page 86: Self-Timer Operation
j Self-timer Operation Use the self-timer when you want to be in the picture. The <Q> (10 sec. timer) can be used in all shooting modes. Press the <o> button. Select the self-timer. Look at the LCD panel and turn the <5>...
Page 87: Advanced Operations
Advanced Operations In the d/s/f/a/F shooting modes, you can select the shutter speed, aperture, and other camera settings to change the exposure and obtain various effects. The M icon on the right of the page title indicates that the function can be used when the Mode Dial is set to <d/s/ f/a/F>.
Page 88: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * <d> stands for Program. * AE stands for Auto Exposure. Set the Mode Dial to <d>. Focus the subject. Look through the viewfinder and aim the selected AF point over the subject.
Page 89 d: Program AE If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Page 90: S: Shutter-Priority Ae
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion.
Page 91 s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure. Turn the <6>...
Page 92: F: Aperture-Priority Ae
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 93: Depth Of Field Preview
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (smaller f/number) until the blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure.
Page 94: A: Manual Exposure
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available handheld exposure meter. This method is called manual exposure. * <a>...
Page 95: Selecting The Metering Mode
q Selecting the Metering ModeN You can select one of four methods to measure the subject brightness. In the fully-automatic modes (1/C), evaluative metering is set automatically. Press the <n> button. Select the metering mode. While looking at the LCD panel, turn the <6>...
Page 96: Setting Exposure Compensation
Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments. Set the Mode Dial to <d>, <s>, or <f>.
Page 97: Auto Exposure Bracketing (Aeb)
h Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±2 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. Select [Expo.
Page 98: A Ae Lock
A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot.
Page 99: F: Bulb Exposures
F: Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
Page 100: Using The Eyepiece Cover
F: Bulb Exposures Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. Remove the eyecup. Push the bottom of the eyecup upward.
Page 101: Mirror Lockup
Mirror LockupN Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups. When [8C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.199), shooting with mirror lockup will be possible.
Page 102: R Remote Control Shooting
R Remote Control Shooting With Remote Controller RC-6, RC-1, or RC- 5 (all sold separately), you can shoot remotely up to about 5 meters/16.4 feet from the camera. RC-6/RC-1 enables you to shoot immediately or have a 2-sec. delay, and RC-5 has a 2-sec. delay. RC-1 RC-6/RC-5 Focus the subject.
Page 103: D Flash Photography
Press the camera’s <m> button, then turn the <5> dial while looking at the LCD panel or LCD monitor. Using Non-EX-series Canon Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL autoflash mode, the flash can be fired at full output only.
Page 104 Cautions for Live View shooting When using a non-Canon flash unit for Live View shooting, set the [6 Live View/Movie func. set.] menu’s [Silent shoot.] to [Disable] (p.113). The flash will not fire if it is set to [Mode 1] or [Mode 2].
Page 105: Setting The Flash
Setting the FlashN When an EX-series Speedlite (such as the 580EX II, 430EX II, and 270EX) settable by the camera is attached, you can use the camera’s menu screen to set the Speedlite’s flash function settings and Custom Functions. First attach the Speedlite to the camera and turn on the Speedlite. For details on Speedlite functions, refer to the Speedlite’s instruction manual.
Page 106 3 Setting the FlashN About E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Flash exposure compensation may be necessary depending on the scene, so this setting is for advanced users.
Page 107: Live View Shooting
Live View Shooting (Still photo shooting with the LCD monitor) You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting”. Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images.
Page 108: A Preparing For Live View Shooting
A Preparing for Live View ShootingN This sets the camera for Live View shooting of still photos. To shoot movies, see page 125. Set the shooting mode. Select one of the following modes: d/ s/f/a/F. Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func.
Page 109: Exposure Simulation
A Preparing for Live View ShootingN Display the Live View image. Press the <A> button. The Live View image will appear on the LCD monitor. Press the <A> button again to turn off the LCD monitor and end Live View shooting. About [Screen settings] You can select the LCD monitor’s image brightness.
Page 110: A Live View Shooting
A Live View ShootingN Focus the subject. Before shooting, focus with AF or manual focus (p.115-122). Press the button to focus in the current AF mode. Take the picture. Press the shutter button completely. The picture will be taken and the captured image is displayed on the LCD monitor.
Page 111 A Live View ShootingN B About the Information Display Each time you press the button, the information display will change. White balance AF point ( Screen settings · h: Stills display · g: Exposure simulation Magnifying frame · e: Movie display Histogram Picture Style AF mode...
Page 112: Shooting Function Settings
Shooting Function SettingsN As with normal shooting through the viewfinder, while the Live View image is displayed, you can still use the camera buttons to change settings and playback images. Pressing the <m>, <o >, <n> or <A> button will display the respective setting screen on the LCD monitor.
Page 113: Menu Function Settings
Menu Function SettingsN During the Live View display, you can still set the menu options. Live View functions are listed below. Under the [6] tab and [Live View/Movie func. set.] menu, you can set the following functions. The functions settable in this menu screen only apply during Live View shooting and Movie shooting.
Page 114: Movie Recording Size
If you use flash, the same operation as the setting [Disable] will take effect even if you had set it to [Mode 1] or [Mode 2]. When using a non-Canon flash unit, set it to [Disable]. The flash will not fire if it is set to [Mode 1] or [Mode 2].
Page 115: Using Af To Focus
Using AF to Focus Selecting the AF Mode The AF modes available are [Quick mode], [Live mode] (p.117), and [Liveu mode] (face detection, p.118). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.122).
Page 116: Take The Picture
Using AF to Focus Focus the subject. Aim the AF point over the subject, and hold down the button. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. AF point When focus is achieved, the beeper will sound and the AF point will be displayed in red.
Page 117: Live Mode
Using AF to Focus Live Mode: The image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode. Also, achieving focus may be more difficult than with the Quick mode.
Page 118 Using AF to Focus Liveu (Face Detection) Mode: With the same AF method as the Live mode, human faces are detected and focused. Have the target person face the camera. Point the camera toward the subject. When a face is detected, a frame will appear over the face to be focused.
Page 119: Manual Focusing
Using AF to Focus If the focus is way off, face detection will not be possible. If the lens enables manual focusing even while the lens focus mode switch is set to <f>, turn the focusing ring to attain rough focus. The face will then be detected and ...
Page 120 Using AF to Focus Live Mode and Liveu (Face Detection) Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the button will focus again. The image brightness may change during and after the AF operation.
Page 121 Using AF to Focus Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing.
Page 122: Focusing Manually
Focusing Manually You can magnify the image and focus precisely manually. Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. Move the magnifying frame. Use <9> to move the magnifying frame to the position where you want to focus.
Page 123 Live View Shooting Cautions Notes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used.
Page 124 Live View Shooting Cautions Notes About the Shooting Results When you shoot with the Live View function at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality.
Page 125: Shooting Movies
Shooting Movies The Live View image can be recorded to the card as a movie. You can shoot a movie with auto exposure, shutter-priority AE, aperture-priority AE, or manual exposure. The movie recording format will be MOV. Cards which can record movies When shooting movies, use a large-capacity card having a read/write speed of at least 8 MB/sec.
Page 126: Preparing To Shoot Movies
k Preparing to Shoot Movies Set the camera to record the Live View image as a movie. To shoot still photos, see pages 107 and 136. Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func. set.], then press <0>. Enable movie shooting.
Page 127 k Preparing to Shoot Movies Set the movie recording size. For details on [Movie rec. size], see page 139. Display the Live View image. Press the <A> button. The Live View image will appear on the LCD monitor. Press the <A> button again to turn off the LCD monitor and end Live View display.
Page 128: Shooting Movies
k Shooting Movies Auto Exposure Shooting When the shooting mode is set to <1>, <C>, <d>, or <F>, auto exposure control will take effect to suit the scene’s brightness. Auto exposure control will be the same for all shooting modes. Set the Mode Dial to <1>, <C>, <d>, or <F>.
Page 129: Shutter-Priority Ae Shooting
k Shooting Movies Shutter-priority AE Shooting When the shooting mode is set to <s>, you can manually set the shutter speed for movie shooting. The ISO speed and aperture will be set automatically to obtain a correct exposure. Set the Mode Dial to <s>. Set the desired shutter speed.
Page 130: Aperture-Priority Ae Shooting
k Shooting Movies Aperture-priority AE Shooting When the shooting mode is set to <f>, you can manually set the aperture for movie shooting. The ISO speed and shutter speed will be set automatically to obtain a correct exposure. Set the Mode Dial to <f>. Set the desired aperture.
Page 131: Manual Exposure Shooting
k Shooting Movies Notes for auto exposure, shutter-priority AE, and aperture-priority AE shooting During movie shooting, you can lock the exposure (AE lock) by pressing the <A> button (p.98). When applying AE lock during movie shooting, you can cancel it by pressing the <S> button (except in 1/C modes).
Page 132 k Shooting Movies Set the shutter speed and aperture. Press the shutter button halfway and check the exposure level indicator. Turn the <6> dial to set the shutter speed within 1/30 sec. to 1/4000 sec. If you set the power switch to <J> and turn the <5>...
Page 133 k Shooting Movies About the ISO speed during manual exposure The ISO speed can be set to [Auto] (A) or set within ISO 100-6400 in 1/3-stop increments. If the ISO speed is set to [Auto] (A), the ISO speed will be set automatically within ISO 100-6400.
Page 134 k Shooting Movies Notes for movie shooting A single movie file will be recorded for each movie shot. During movie shooting, the top, bottom, left, and right parts of the screen will have a semi-transparent mask. The image area surrounded by the mask is what will be recorded in the movie.
Page 135 k Shooting Movies B About the Information Display Each time you press the button, the information display will change. White balance Movie shooting remaining time/Elapsed time AF point ( Screen settings · h: Stills display · g: Exposure simulation Magnifying frame ·...
Page 136 k Shooting Movies Taking Still Photos During Movie Shooting You can take a still photo at anytime by pressing the shutter button completely, even during movie shooting. The still photo will record the entire screen including the semi- transparent mask. The still photo will be taken at the exposure setting displayed when you press the shutter button halfway.
Page 137: Shooting Function Settings
k Shooting Movies ISO speed for still photos during movie shooting Shooting Mode ISO Speed With C.Fn I -3-0 With C.Fn I -3-1 Auto 100 - 3200 1 C d F Auto 100 - 6400 Auto 100 - 6400 Manual 100 - 6400 100 - 6400, H1 Regarding [8C.Fn I -3: ISO expansion], see page 193.
Page 138: Menu Function Settings
Menu Function Settings During movie shooting, you can still set the menu options. Movie shooting functions are listed below. Under the [6] tab with the [Live View/ Movie func. set.] screen, you can set the following functions. The functions settable in this menu screen only apply during Live View shooting and Movie shooting.
Page 139: Recording Size
3 Menu Function Settings Movie recording size You can select the movie’s image size [****x****] and frame rate [ (frames recorded per second). The (frame rate) switches automatically depending on the [6 Video system] setting. • Image size [1920x1080] : Full HD (Full High-Definition) recording quality. [640x480] : Standard-definition recording quality.
Page 140: Sound Recording
3 Menu Function Settings Sound recording Normally, the built-in microphone will record monaural sound. Stereo sound recording is possible by connecting an external microphone (commercially available) equipped with a stereo mini plug (3.5mm dia.) to the camera’s external microphone IN terminal (p.16). When an external microphone is Level meter connected, the sound recording will...
Page 141 Movie Shooting Cautions Recording and Image Quality When you shoot movies at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. The Image Stabilizer may cause the total movie shooting time or the number of possible shots to decrease.
Page 142 Movie Shooting Cautions Camera’s Internal Temperature Increase If the camera’s internal temperature becomes high, the <E> icon may appear on the screen. When not shooting, turn off the camera. If you take still photos while the <E> icon is displayed on the screen, the image quality may be degraded.
Page 143: Image Playback
Image Playback This chapter explains how to playback and erase photos and movies, how to display images on a TV screen, and other playback-related functions. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.
Page 144: Image Playback
x Image Playback Single Image Display Playback the image. Press the <x> button. The last captured image or last image viewed will appear. Select the image. To playback images starting with the last image, turn the <5> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise.
Page 145: B Shooting Information Display
x Image Playback B Shooting Information Display Protect AF Microadjustment Exposure compensation amount Folder number - File number Flash exposure compensation amount Card Aperture Histogram Shutter speed/ (Brightness/RGB) Recording time Picture Style and Metering mode settings Shooting mode/ ISO speed Movie Highlight tone priority Color temperature if...
Page 146: About The Histogram
x Image Playback About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [4 Histogram] menu. [Brightness] Display Sample Histograms This histogram is a graph showing the...
Page 147: Hi Searching For Images Quickly
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. Turn on the index display. During image playback, press the ...
Page 148 x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, index display, and magnified view, you can turn the <6> dial to jump through the images. Select the jump method. In the [4 Image jump w/6] menu, select the desired jump method from [1 image/10 images/100 images/ Screen/Date/Folder/Movies/Stills],...
Page 149: U/Y Magnified View
u/y Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. Magnify the image. During image playback, press the button. The image will be magnified. To increase the magnification, hold down the button. The image will continue to be magnified until it reaches the maximum magnification.
Page 150: Rotating The Image
b Rotating the Image You can rotate the displayed image to the desired orientation. Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. Select the image. Turn the <5> dial to select the image to be rotated. You can also select an image on the index display.
Page 151: Enjoying Movies
k Enjoying Movies Basically, there are the following three ways to playback the movies you shot. Playback on a TV set (p.157, 158) Use the provided stereo video cable or HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. You can then playback the captured movies and photos on the TV.
Page 152 k Enjoying Movies Playback and Editing with a Personal Computer (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser) The movie files recorded in the card can be transferred to a personal computer and played or edited with ZoomBrowser EX/ImageBrowser (provided software). You can also extract a single frame from a movie and save it as a still photo.
Page 153: Playing Movies
k Playing Movies Playback the image. Press the <x> button to display the image. Select a movie. Turn the <5> dial to select the image. During the single-image display, the <1s> icon displayed on the upper left indicates that it is a movie. During the index display, the perforation on the left edge of the image indicates that it is a movie.
Page 154 k Playing Movies Item Playback Description Exit Returns to the single-image display. Play Pressing <0> toggles between play and stop. Adjust the slow motion speed by turning the <5> dial. The Slow motion slow-motion speed is indicated on the upper right. First frame Displays the movie’s first frame.
Page 155: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. Select [Slide show]. Under the [4] tab, select [Slide show], then press <0>. Select the images to be played Quantity of images for playback back.
Page 156: Start The Slide Show
3 Slide Show (Auto Playback) Set the playback time and repeat option. Turn the <5> dial to select [Set up], then press <0>. For still photos, set the [Play time] and [Repeat] options, then press the <M> button. Play time Repeat Start the slide show.
Page 157: Viewing The Images On Tv
Viewing the Images on TV You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV set, part of the image displayed might be cut off.
Page 158 Viewing the Images on TV Viewing on HD (High-Definition) TV Sets The HDMI Cable HTC-100 (sold separately) is required. Connect the HDMI cable to the camera. Connect the HDMI cable to the camera’s <D> terminal. With the plug’s <dHDMI MINI> logo facing the front of the camera, insert it into the camera’s <D>...
Page 159: K Protecting Images
K Protecting Images Protecting the image prevents it from being erased accidentally. Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. The protect setting screen will appear. Select the image and protect it. Image protect icon Turn the <5>...
Page 160: L Erasing Images
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.159) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect it.
Page 161 L Erasing Images Select [Select and erase images]. Turn the <5> dial to select [Select and erase images], then press <0>. An image will appear. Press the button to display the three-image view. To return to the single-image display, press the button.
Page 162: Changing Image Playback Settings
Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness The LCD monitor’s brightness is adjusted automatically for optimum viewing. You can set the automatic adjustment’s brightness level (brighter or darker) or adjust the brightness manually. Select [LCD brightness]. Under the [6] tab, select [LCD brightness], then press <0>.
Page 163: Setting The Image Review Time
Changing Image Playback Settings 3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off]. Select [Review time].
Page 164: Auto Rotation Of Vertical Images
Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed. Select [Auto rotate]. Under the [5] tab, select [Auto rotate], then press <0>.
Page 165: Sensor Cleaning
In case visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately.
Page 166: Automatic Sensor Cleaning
f Automatic Sensor Cleaning Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not be aware of this operation.
Page 167: Appending Dust Delete Data
Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots.
Page 168: Photograph A Solid-White Object
3 Appending Dust Delete DataN Photograph a solid-white object. At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in the aperture- priority AE mode with an aperture of f/22.
Page 169: Manual Sensor Cleaning
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera.
Page 170 Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor. If smear that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 171: Printing Images And Transferring Images To A Computer
Printing Images and Transferring Images to a Computer Printing (p.172) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. Digital Print Order Format (DPOF) (p.181) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing...
Page 172: Preparing To Print
Preparing to Print The direct printing procedure is done entirely with the camera while looking at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power switch to <2>. Set up the printer. For details, see the printer’s instruction manual.
Page 173 Preparing to Print Playback the image. PictBridge Press the < > button. The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer. The <l> button lamp will light in blue.
Page 174: Wprinting
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon Select the image to be printed. Check that the <w> icon is displayed on the upper left of the LCD monitor.
Page 175 The paper type screen will appear. YSetting the Paper Type Select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used.
Page 176: Set The Printing Effects
wPrinting Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. The screen display may differ depending on the printer. Select the option on the upper right, then press <0>. Select the desired printing effect with the dial, then press <0>.
Page 177: Start Printing
wPrinting Set the date and file number imprinting. Set as necessary. Select < >, then press <0>. Set as desired, then press <0>. Set the number of copies. Set as necessary. Select < >, then press <0>. Set the number of copies, then press <0>.
Page 178 wPrinting e Adjustment of Printing Effects In step 4 on page 176, select the printing effect. When the <e> icon is displayed next to <z>, press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
Page 179: Trimming The Image
wPrinting Trimming the Image You can crop the image and print only Tilt correction the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.
Page 180: Error Messages
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately.
Page 181: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order].
Page 182 W Digital Print Order Format (DPOF) Standard Prints one image on one sheet. Index Multiple, thumbnail images are printed on one sheet. Print type Both Prints both the standard and index prints. Date [On] imprints the recorded date on the print. File number [On] imprints the file No.
Page 183: Print Ordering
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. Press the button to display the three-image view. To return to the single- image display, press the button. After completing the print order, press the <M>...
Page 184: Direct Printing With Dpof
WDirect Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. Preparing to print. See page 172. Follow the “Connecting the Camera to a Printer” procedure up to step 5. Under the [ ] tab, select [Print order]. Select [Print].
Page 185: Transferring Images To A Personal Computer
d Transferring Images to a Personal Computer By connecting the camera to a personal computer, you can transfer images from the camera’s card by operating the camera. This feature is called direct image transfer. Before connecting the camera to a personal computer, be sure to install the provided software (EOS DIGITAL Solution Disk on CD-ROM) in the personal computer.
Page 186: Transferring Images To A Personal Computer
d Transferring Images to a Personal Computer If the [EOS Utility] screen does not appear, see Software Instruction Manual in the CD-ROM. Before disconnecting the cable, turn off the camera. Pull out the cable by grasping the plug (instead of the cord). Transferring Images to a Personal Computer The images sent to the personal computer will be saved in the [My Pictures] folder or [Pictures] folder in subfolders organized according...
Page 187 d Transferring Images to a Personal Computer Options other than [All images] are explained below. To start the image transfer, press the <l> button. New images Images which have not yet been transferred to the personal computer will be selected by the camera automatically and transferred.
Page 188: Selecting The Images To Be Transferred
d Transferring Images to a Personal Computer 3 Selecting the Images to be Transferred Under the [3] tab, you can use [Transfer order] to select the images to be transferred to a personal computer. When you select [Transfer order images] on page 187, you can transfer the images set by the transfer order.
Page 189: Customizing The Camera
Customizing the Camera With Custom Functions, you can change the camera functions according to your preference. Also, the current camera settings can be saved under the Mode Dial’s <w>, <x>, and <y> positions. The features explained in this chapter can be set and used in the following shooting modes: d, s, f, a,...
Page 190: Setting Custom Functions
Setting Custom FunctionsN Select [8]. Turn the <6> dial to select the [8] tab. Select the group. Turn the <5> dial to select C.Fn I - IV, then press <0>. Select the Custom Function Custom Function No. number. Turn the <5> dial to select the Custom Function No., then press <0>.
Page 191: Custom Functions
Custom FunctionsN k Movie z LV C.Fn I: Exposure shooting shooting Exposure level increments ISO speed setting increments In M mode In P, Av, or p.193 B mode ISO expansion In M mode, manually settable Bracketing auto cancel (Still photo) Bracketing sequence (Still photo) Safety shift...
Page 192 3 Custom FunctionsN k Movie z LV C.Fn III: Autofocus/Drive shooting shooting Lens drive when AF impossible With p.197 2, 3, and 5 only Lens AF stop button function (3 enabled only with AF point selection method Superimposed display p.198 With AF-assist beam firing With...
Page 193: Custom Function Settings
Custom Function SettingsN C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
Page 194 3 Custom Function SettingsN C.Fn I -5 Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed. 0: 0, -, + 1: -, 0, + WB Bracketing B/A Direction M/G Direction 0 : Standard exposure 0 : Standard white balance 0 : Standard white balance - : Decreased exposure - : Blue bias - : Magenta bias + : Increased exposure + : Amber bias...
Page 195: C.fn Ii: Image
3 Custom Function SettingsN C.Fn II: Image C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec.
Page 196: Auto Lighting Optimizer
3 Custom Function SettingsN C.Fn II -3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, noise in the shadow areas may be slightly more than usual.
Page 197: C.fn Iii: Autofocus/Drive
3 Custom Function SettingsN C.Fn III: Autofocus/Drive C.Fn III -1 Lens drive when AF impossible If autofocus is executed, but focus cannot be achieved, the camera can either keep trying to focus or stop. 0: Focus search on 1: Focus search off Prevents the camera from becoming grossly out of focus as it attempts to focus again.
Page 198 3 Custom Function SettingsN C.Fn III -3 AF point selection method 0: Normal Press the <S> button, then use <9> or <6/5> dial to select an AF point. 1: Multi-controller direct Without pressing the <S> button first, you can just use the <9> to select the desired AF point.
Page 199 3 Custom Function SettingsN C.Fn III -6 Mirror lockup 0: Disable 1: Enable Prevents camera vibrations caused by the reflex mirror action which can disturb shooting with super telephoto lenses or close-up (macro) shooting. See page 101 for the mirror lockup procedure. C.Fn III -7 AF point area expansion 0: Disable...
Page 200 3 Custom Function SettingsN C.Fn III -8 AF Microadjustment Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved. AF adjustment cannot be done during Live View shooting in Live and Liveu modes. You can make fine adjustments for the AF’s point of focus.
Page 201: C.fn Iv: Operation/Others
3 Custom Function SettingsN C.Fn IV: Operation/Others C.Fn IV -1 Shutter button/AF-ON button 0: Metering + AF start 1: Metering + AF start/AF stop During autofocusing, you can press the button to stop the autofocusing. 2: Metering start/Metering + AF start This is useful for subjects which keep moving and stopping repeatedly.
Page 202 3 Custom Function SettingsN C.Fn IV -3 Assign SET button You can assign a frequently-used function to <0>. When the camera is ready to shoot, you can press <0>. 0: Normal (disabled) 1: Image quality Press <0> to display the image-recording quality setting screen on the LCD monitor.
Page 203 3 Custom Function SettingsN C.Fn IV -5 Focusing Screen If you change the focusing screen, change this setting to match the focusing screen type. This is to obtain the correct exposures. 0: Eg-A 1: Eg-D 2: Eg-S About focusing screen characteristics Eg-A: Standard Precision Matte Standard focusing screen that comes with the camera.
Page 204 3 Custom Function SettingsN C.Fn IV -6 Add original decision data 0: Off 1: On Data for verifying whether the image is original or not is appended to the image automatically. When the shooting information of an image appended with the verification data is displayed (p.145), the <L> icon will appear.
Page 205: Registering My Menu
Registering My MenuN For faster access, you can register up to six menus and Custom Functions whose settings you change frequently. Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. Select [Register]. Turn the <5> dial to select [Register], then press <0>.
Page 206: Register Camera User Settings
w Register Camera User SettingsN Under the Mode Dial’s <w>, <x>, and <y> positions, you can register most of the current camera settings including your preferred shooting mode, menus, Custom Function settings, etc. Select [Camera user setting]. Under the [7] tab, select [Camera user setting], then press <0>.
Page 207: Shooting Functions
w Register Camera User SettingsN Settings Registered Shooting functions Shooting mode + setting, ISO speed, AF mode, AF point, Metering mode, Drive mode, Exposure compensation amount, Flash exposure compensation amount Menu Functions Quality, Beep, Shoot w/o card, Review time, Peripheral illumination correction Exposure compensation/AEB, White balance, Custom WB, WB SHIFT/BKT, Color space, Picture Style...
Page 209: Reference
Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
Page 210: B Checking Camera Settings
B Checking Camera Settings When the camera is ready to shoot, press the button and “Camera settings” and “Shooting functions” screens will appear. When “Shooting functions” is displayed, you can set the shooting functions while looking at the LCD monitor. Display “Camera set.”...
Page 211 B Checking Camera Settings Shooting Functions AE lock Picture Style Aperture ISO speed Highlight tone priority Shutter speed Exposure level/ Flash exposure AEB range compensation Shooting mode Metering mode AF point Drive mode Image-recording quality Possible shots White balance Quick Control icon Battery check AF mode White balance correction...
Page 212: Checking The Battery Information
Checking the Battery Information You can check the battery’s condition on the LCD monitor. The Battery Pack LP-E6 has a unique serial No., and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remaining capacity and operation history.
Page 213: Registration
3 Checking the Battery Information Registering the Battery to the Camera You can register up to six Battery Pack LP-E6’s to the camera. To register multiple battery packs to the camera, do the procedure below for each battery pack. Press the button. With the Battery info.
Page 214 3 Checking the Battery Information Labeling the Serial No. on the Battery Affixing the serial No. onto all the registered Battery Pack LP-E6’s with a label makes it convenient. Write the serial No. on a label. Serial No. Write the serial No. displayed on the battery history screen on a label about 25 mm x 15 mm / 1.0 in.
Page 215 3 Checking the Battery Information Checking the Remaining Capacity of a Registered Battery Pack You can check the remaining capacity of any battery pack (even while not installed) and also when it was last used. Look for the serial No. Serial No.
Page 216: Using A Household Power Outlet
Using a Household Power Outlet With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. Connect the DC plug. Connect the DC Coupler’s plug to the AC adapter’s socket.
Page 217: Replacing The Date/Time Battery
Replacing the Date/Time Battery The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If you turn on the power and the date/ time is reset, replace the back-up battery with a new CR1616 lithium battery as described below.
Page 218: Function Availability Table
Function Availability Table o: Set automatically k: User selectable : Not selectable/Disabled Viewfinder Shooting k Movie z LV Function Shooting Shooting 1 C d s f a F JPEG k k k k k k k Quality (Still photo) k k k k k k k RAW+JPEG k k k k k k k (Other...
Page 219: External Flash
Function Availability Table o: Set automatically k: User selectable : Not selectable/Disabled Viewfinder Shooting k Movie z LV Function Shooting 1 C d s f a Shooting One-Shot With k k k k k AI Servo k k k k k AI Focus o o k k k k k Auto...
Page 220: Menu Settings
Menu Settings 1 Shooting 1 (Red) Page 73 / 83 / 74 / 84 / 76 / 86 Quality 1 / D1 / D2 Beep On / Off – Shoot w/o card On / Off Review time Off / 2 sec. / 4 sec. / 8 sec. / Hold Peripheral illumination Enable / Disable correction...
Page 221 Menu Settings 4 Playback 2 (Blue) Page Highlight alert Disable / Enable AF point display Disable / Enable Histogram Brightness / RGB Select the images, set the Play time and Slide show repeat settings for automatic playback 1 image / 10 images / 100 images / Screen / Image jump w/6 Date / Folder / Movies / Stills 5 Set-up 1 (Yellow)
Page 222: Custom Function (C.fn)
Menu Settings 7 Set-up 3 (Yellow) Page Type, Remaining capacity, Shutter count, Battery info. Recharge performance, Battery registration, Battery history Normal display / Camera settings / Shooting INFO. button function External Speedlite Flash function settings / Flash C.Fn settings / control Clear all Speedlite C.Fn’s Register current camera settings to the Mode...
Page 223: Troubleshooting Guide
Canon Service Center. Power-Related Problems The battery cannot be recharged with the battery charger provided. Do not recharge any battery pack other than genuine Canon Battery Pack LP-E6. The charger’s lamp blinks at high speed. If there is a problem with the battery charger or battery pack or if...
Page 224 Troubleshooting Guide The access lamp still blinks even when the power switch is set to <2>. If the power is cut off while an image is being recorded to the card, the access lamp will light/blink for a few sec. When the image recording is completed, the power will turn off automatically.
Page 225 Troubleshooting Guide No images can be shot or recorded. The card is not properly inserted (p.29). If the card is full, replace the card or delete unnecessary images to make room (p.29, 160). If you try to focus in One-Shot AF mode while the focus confirmation light <o>...
Page 226 The flash does not fire. Make sure the flash (or PC sync cord) is securely attached to the camera. If you use a non-Canon flash with Live View shooting, set [Silent shoot.] to [Disable] (p.104). The flash always fires at full output.
Page 227 Troubleshooting Guide Live View shooting is not possible. For Live View shooting, use a memory card (a hard disk-type card is not recommended). A hard disk-type card requires a lower temperature range for operation than normal memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card’s hard disk.
Page 228 Troubleshooting Guide During movie shooting, the exposure becomes bright momentarily. Changing the aperture during movie shooting is not recommended since changes in the exposure, due to the drive of the lens aperture, will be recorded. If you use a lens whose aperture changes while you zoom, you should not zoom while shooting a movie.
Page 229 Troubleshooting Guide Display & Operation Problems The LCD monitor does not display a clear image. If dust is adhering to the LCD monitor, wipe its surface with a lens cloth or soft cloth. In low or high temperatures, the LCD monitor display may seem slow or might look black.
Page 230 Troubleshooting Guide No image appears on the TV screen. Make sure the stereo video cable or HDMI cable’s plug is connected all the way in (p.157,158). Set the video OUT format (NTSC/PAL) to the same video format as the TV (p.221). Use the stereo video cable that came with the camera (p.157).
Page 231: Error Codes
Communications between the camera and lens is faulty. Clean the lens contacts. Clean the electrical contacts on the camera and lens, use a Canon lens, or have the camera or lens checked or repaired. (p.13,16) There is a problem with the card. Replace the card.
Page 232: System Map
System Map Eyepiece Extender EP-EX15 ST-E2 270EX 430EX II 580EX II Macro Ring Lite Macro Twin Lite MR-14EX MT-24EX Rubber Frame Eb Bundled Accessories E-series Dioptric Adjustment Lenses Focusing Screen Eg-A Eyecup Eb Wide Strap EW-EOS5DMKII Angle Finder C Date / time Battery Pack CR1616 lithium battery Battery Charger...
Page 233 System Map Timer Remote Remote Wireless Remote Remote Controller Controller Controller Switch Controller TC-80N3 RS-80N3 LC-5 RC-6/RC-5 RC-1 EF lenses External microphone HDMI Cable HTC-100 Stereo Video Cable STV-250N TV/Video USB external media Wireless File Transmitter WFT-E4 II A/B/C/D or WFT-E4/E4A USB GPS unit EOS DIGITAL Software Instruction...
Page 234: Specifications
Type I or II CF card, UDMA-compatible Image sensor size: Approx. 36 x 24 mm Compatible lenses: Canon EF lenses (except EF-S lenses) (The effective lens focal length is the same as indicated on the lens) Lens mount: Canon EF mount •...
Page 235 Specifications • Viewfinder Type: Eye-level pentaprism Coverage: Vertical/Horizontal approx. 98% Magnification: Approx. 0.71x (-1 m with 50mm lens at infinity) Eye point: Approx. 21 mm (From eyepiece lens center at -1 m Built-in dioptric adjustment: -3.0 - +1.0 m (dpt) Focusing screen: Interchangeable (2 types sold separately), Eg-A standard focusing screen provided...
Page 236 RAW: Approx. 13 shots (Approx. 14 shots), RAW+JPEG Large/Fine: Approx. 8 shots (Approx. 8 shots) * Figures are based on Canon’s testing standards (ISO 100 and Standard Picture Style) using a 2GB card. * Figures in parentheses apply to an Ultra DMA (UDMA) 2GB card based on Canon’s testing standards.
Page 237 Specifications • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 640x480 (SD) : 30p/25p * 30p: 29.97 fps, 25p: 25.0 fps, 24p: 23.976 fps File size: 1920x1080 (30p/25p/24p): Approx.
Page 238 Specifications • Image Playback Image display formats: Single, Single + Info (Image-recording quality, shooting information, histogram) 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.5x - 10x Image browsing methods: Single image, jump by 10 or 100 images, jump by screen, by shooting date, by folder, by movie, by stills Highlight alert: Overexposed highlights blink...
Page 239 Specifications Battery information: Remaining capacity, Shutter count, and Recharge performance displayed Battery life: With viewfinder shooting: (Based on CIPA At 23°C/73°F, approx. 850 shots. At 0°C/32°F, approx. testing standards) 750 shots. With Live View shooting: At 23°C/73°F, approx. 200 shots. At 0°C/32°F, approx. 180 shots.
Page 240 LP1219 (sold separately) All specifications above are based on Canon’s testing standards. The camera’s specifications and exterior are subject to change without notice. If a problem occurs with a non-Canon lens attached to the camera, consult the respective lens maker.
Page 241 Trademarks Adobe is a trademark of Adobe Systems Incorporated. CompactFlash is a trademark of SanDisk Corporation. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other countries.
Page 242 Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet.
Page 243 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
Page 244 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600 This Class B digital apparatus complies with Canadian ICES-003.
Page 245 4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury. 6. To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.
Page 246 MEMO...
Page 247 MEMO...
Page 248 MEMO...
Page 249 MEMO...
Page 250 MEMO...
Page 251 MEMO...
Page 252 MEMO...
Page 253 MEMO...
Page 254: Index
Index Index 10-sec. or 2-sec. delay ....86 Battery check ......... 28 1920x1080 ........139 Battery Grip ........212 1st-curtain sync......105 Beeper......48, 79, 220 ........139 Black-and-white (printing) .... 176 4- or 9-image index display...147 Black-and-white image..... 60, 62 640x480 ........139 Borders (Yes/No)......175 Bracketing ......
Page 255: Flash Control
Flash exposure compensation ... 103 Direct selection ......198 Flash sync (1st/2nd curtain)..105 Direct transfer .......185 Flash-sync speed..... 104, 194 DPOF ..........181 Non-Canon flash units ..... 104 Drive mode......85, 211 Flash exposure Dust Delete Data......167 compensation ....103, 193, 211 Dynamic range......196 Flash mode........
Page 256 Index Focusing Image AF mode......78, 211 AF point display ....... 145 AF point display......145 Auto rotation ......164 AF point selection..81, 198, 211 Erase ........160 AF-assist beam ......198 Highlight alert......145 Beeper......48, 79, 220 Histogram ........ 146 Difficult-to-focus subjects..84, 121 Index ........
Page 257: Attaching/Detaching
Index LCD monitor........13 Medium (Image-recording quality) ..55 Brightness adjustment ....162 Memory card Card Image playback ......143 Menu Menu settings .....40, 220 Menu settings......220 Shooting functions ....211 My Menu ........205 LCD panel ........18 Setting operation......40 Illumination .........99 3 icon.........
Page 258 Neutral ..........60 Battery info....... 212 Noise reduction......195 Household power..... 216 Nomenclature .........16 Possible shots....28, 55, 112 Non-Canon flash units ....104 Recharge ........24 Normal (Image-recording quality) ...55 Recharge performance .... 212 NR (printing) .........176 Switch ........27 NTSC ........139, 221 Precision matte ......
Page 259 Index System map ......... 232 Safety shift ........194 Safety warnings ......242 Toning effect (Monochrome)... 62 Saturation........61, 178 Trademarks ........241 Self-timer.........86 Transfer order (image) ....188 Sensor cleaning ......165 Trimming (printing) ....... 179 Sepia (Monochrome) ......62 Tripod socket ........17 SET button ........40 Tv (Shutter-priority AE)...
Page 260 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. U.S.A. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON CANADA INC. HEADQUARTERS CANADA 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC.

This manual is also suitable for:

Eos 5d mark ii

Canon EOS 5D Instruction Manual

Getting Started

Basic Shooting

Image Settings

Advanced Operations

Shooting Movies

Sensor Cleaning

Printing Images and Transferring Images to a Computer

Customizing the Camera

Reference

Quick Links

Related Manuals for Canon EOS 5D

Summary of Contents for Canon EOS 5D