F Using A Remote Switch; R Remote Control Shooting - Canon EOS 5DS Instruction Manual

F Using a Remote Switch

You can connect the Remote Switch RS-80N3 (sold separately) or
Timer Remote Controller TC-80N3 (sold separately) or any EOS
accessory equipped with an N3-type terminal to the camera for
shooting (p.454).
To operate the accessory, refer to its instruction manual.

R Remote Control Shooting

1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
from the camera. You can either shoot immediately or
use a 2-sec. delay.
You can also use Remote Controller RC-1 and RC-5.
1
Focus on the subject.
2
Set the lens's focus mode switch
to <MF>.
3
Press the <o> button.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
silver part and pull.
You can also shoot with <f>.
(9)
237