Silent Control - Canon EOS-1DC Instruction Manual

Silent Control

3
This function is convenient when you want to change the ISO speed,
sound-recording level, etc., silently while shooting a movie.
If [z5: Silent Control] is set to [Enable h], you cannot adjust the
sound-recording level with the <5> Quick Control dial during movie
shooting.
Even if you change the aperture silently with <h>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on <h>, the touch operation may not work. In
such a case, use a clean cloth to clean <h>. If it still does not work, wait
a while and try again.
Before shooting a movie, you can use <h> to adjust the sound-recording
level in the Quick Control and [Rec. level] screens.
Downloaded From camera-usermanual.com Canon Manuals
42
When [z5: Silent Control] is set to
[Enable h], you can use the touch pad
<h> on the inner ring of the Quick
Control Dial.
You can operate the camera silently just
by touching the top, bottom, left, or right
of <h>.
During movie shooting, you can press
<Q> to display the Quick Control screen
and change the settings below with
<h>.
Settable
Functions
1. Shutter speed
2. Aperture
3. ISO speed
4. Exposure
compensation
5. Sound-
recording level
Shooting Mode
d/B s f
k
– –
– – k
– – –
k k k
k k k
a
k
k
k
–
k