F Using A Remote Switch; R Remote Control Shooting - Canon EOS 6D Instruction Manual

F Using a Remote Switch

You can connect the Remote Switch RS-80N3, Timer Remote
Controller TC-80N3 (both sold separately), or any EOS accessory
equipped with an N3-type terminal to the camera for shooting (p.354).
To operate the accessory, refer to its instruction manual.

R Remote Control Shooting

Open the terminal cover.
1
Connect the plug to the remote
2
control terminal.


With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
from the camera. You can either shoot immediately or
use a 2-sec. delay.
You can also use Remote Controller RC-1 and RC-5.
Focus the subject.
1
Set the lens focus mode switch to
2
<MF>.

Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
silver part and pull.
You can also shoot with <f>.
167