System Board - HP EliteBook Folio 1020 G1 Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
System boards for use in models without Windows 8:
Equipped with Intel Core M-5Y51 processor
Equipped with Intel Core M-5Y71 processor
System boards for use in Windows 8 models:
Equipped with Intel Core M-5Y51 processor for use in models with Windows 8 Standard
Equipped with Intel Core M-5Y51 processor for use in models with Windows 8 Professional
Equipped with Intel Core M-5Y71 processor for use in models with Windows 8 Standard
Equipped with Intel Core M-5Y71 processor for use in models with Windows 8 Professional
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SSD drive module (see
●
WLAN module (see
●
Heat sink (see
Remove the system board:
1. Disconnect the following cables:
(1): Display panel
(2): Speaker
(3): Webcam
(4): ForcePad
(5): NFC module
(6): Fingerprint reader
60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 56).
SSD drive on page
WLAN module on page
Heat sink on page 54)
32).
41)
43)
Spare part number
790064-001
790065-001
790064-501
790064-601
790065-501
790065-601