HP EliteBook Folio 1020 G1 Service Manual page 54

2. Remove the two Phillips PM2.5×5.2 screws (1) that secure the bracket on the left side of the computer,
and the remove the bracket (2).
The display brackets are available in the Bracket Kit using spare part number 800582-001.
3. Remove the cable from the routing clips in the right display bracket (1).
4. Remove the two Phillips PM2.5×3.4 screws (2) that secure the display bracket to the right side of the
computer, and then remove the bracket (3).
The display brackets are available in the Bracket Kit using spare part number 800582-001.
5. Disconnect the display cable from the system board (1).
6. Remove the WLAN antenna from the clips and routing path built into the computer (2).
7. Disconnect the webcam cable from the system board (3).
8. Remove the three Phillips PM2.5×4.0 screws (4) that secure the display to the computer.
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts