Operating Dj Software By Midi Interface; List Of Midi Messages - Pioneer CDJ-900NXS Operating Instructions Manual

Using other brands of
DJ software
Operating DJ software by MIDI
interface
This unit also outputs the operating data for the buttons and controls in
MIDI format. If you connect a computer with a built-in MIDI-compatible
DJ software via a USB cable, you can operate the DJ software on this
unit. The sound of music files being played on the computer can also be
output from the CDJ-900nexus.
To use this unit as an audio device, install the driver software on the
computer beforehand (page 34). This unit must also be selected in
the DJ software's audio output device settings. For details, see your DJ
software's operating instructions.
1 Connect the USB port on this unit to your computer.
For instructions on connecting, see Using other brands of DJ software on
page 13.
2 Press the [BROWSE] button, then press the [LINK]
button.
[Control Mode] and [USB-MIDI] appear on the menu screen.
3 Select [Control Mode] and enter.
The connecting screen is displayed.
4 Select [USB-MIDI] and enter.
This unit switches to the control mode.
5 Launch the DJ software.
Communication with the DJ software starts.
! The DJ software on the computer can be operated using the buttons
and rotary selector on this unit.
! It may not be possible to use some buttons to operate the DJ
software.
! The control mode is canceled when a track is loaded in this unit.
! For messages output by this unit, see List of MIDI Messages on page
36.
Changing the MIDI channel setting
1 Press the [MENU (UTILITY) ] button for over 1 second.
The utility screen appears.
2 Select [MIDI CHANNEL] and enter.
3 Turn the rotary selector.
Select the MIDI channel and change the setting. A setting from 1 – 16
can be selected.
4 Press the rotary selector to enter.
5 Press the [MENU (UTILITY) ] button.
The previous screen reappears.

List of MIDI Messages

SW Name SW Type
JOG (TOUCH) —
TEMPO
VR
SLIDER
36
En
MIDI Messages
Notes
MSB
A linear value corresponding
to the speed, from stop to 4X:
64 for stop, 65 (0.06X) – 127
Bn 10 dd
(4X) in the forward direction,
63 (0.06X) – 0 (4X) in the
reverse direction.
0 – 127, 0 on the – side, 127 on
Bn 1D dd
the + side
MIDI Messages
SW Name SW Type
MSB
TOUCH/
VR Bn
RELEASE
JOG RING — Bn
General
ENCODER Purpose Bn
Controller
PLAY/PAUSE SW 9n
CUE SW 9n
SEARCH FWD SW 9n
SEARCH REV SW 9n
TRACK
SEARCH SW 9n
NEXT
TRACK
SW 9n
SEARCH REV
LOOP IN SW 9n
LOOP OUT SW 9n
RELOOP SW 9n
QUANTIZE SW 9n
MEMORY SW 9n
CALL NEXT SW 9n
CALL PREV SW 9n
DELETE SW 9n
TIME/A.CUE SW 9n
TEMPO
SW 9n
RANGE
MASTER
SW 9n
TEMPO
JOG MODE SW 9n
MASTER SW 9n
SYNC SW 9n
JOG TOUCH SW 9n
REVERSE SW 9n
BEAT DIVIDE
SW 9n
3/4
BEAT DIVIDE
SW 9n
1/3
BEAT DIVIDE
SW 9n
1/2
BEAT DIVIDE
SW 9n
1/4
BEAT DIVIDE
SW 9n
1/8
4 BEAT LOOP SW 9n
SLIP SW 9n
EJECT SW 9n
TAG TRACK SW 9n
BACK SW 9n
ENCODER
SW 9n
PUSH
n is the channel number.
Notes
0 – 127, 0 (min.) on the left
1E dd side, 127 (max.) on the right
side
A linear value correspond-
ing to the speed from 0.5X to
4X: 64 when stopped (under
30 dd 0.49X), 65 (0.5X) to 127 (4X)
in the forward direction, 63
(0.5X) to 0 (4X) in the reverse
direction.
98 – 127, 1 – 30 Difference of
count from previous time is
4F dd
sent (±1 – ±30) When over
±30, set at ±30
00 dd OFF=0, ON=127
01 dd OFF=0, ON=127
02 dd OFF=0, ON=127
03 dd OFF=0, ON=127
04 dd OFF=0, ON=127
05 dd OFF=0, ON=127
06 dd OFF=0, ON=127
07 dd OFF=0, ON=127
08 dd OFF=0, ON=127
09 dd OFF=0, ON=127
0A dd OFF=0, ON=127
0B dd OFF=0, ON=127
0C dd OFF=0, ON=127
0D dd OFF=0, ON=127
0E dd OFF=0, ON=127
10 dd OFF=0, ON=127
11 dd OFF=0, ON=127
12 dd OFF=0, ON=127
1E dd OFF=0, ON=127
1F dd OFF=0, ON=127
20 dd OFF=0, ON=127
21 dd OFF=0, ON=127
23 dd OFF=0, ON=127
24 dd OFF=0, ON=127
25 dd OFF=0, ON=127
26 dd OFF=0, ON=127
27 dd OFF=0, ON=127
2A dd OFF=0, ON=127
2C dd OFF=0, ON=127
2F dd OFF=0, ON=127
30 dd OFF=0, ON=127
32 dd OFF=0, ON=127
33 dd OFF=0, ON=127