Pioneer CDJ-900NXS Operating Instructions Manual page 33

Multi player
Hide thumbs Also See for CDJ-900NXS:
Table of Contents

Advertisement

Options
Setting ranges
settings
ON AIR
ON*/OFF
DISPLAY
LANGUAGE
LIBRARY
LIBRARY*/FOLDER
CREATOR
HISTORY
NAME
PLAYER No.
AUTO*, 1 – 4
LINK STATUS
MIDI CHANNEL
1* to 16
DIGITAL OUT
16 bit/24 bit*
AUTO
ON*/OFF
STANDBY
LCD
1 – 3* – 5
BRIGHTNESS
SCREEN SAVER
ON*/OFF
DEFAULT*, ALL,
DUPLICATION
PLAYER1–4
VERSION No.
*: Setting upon purchase
Changing the play mode
1 Display the [UTILITY] screen.
= Displaying the [UTILITY] screen (p.32)
2 Use the rotary selector to select and enter [PLAY
MODE].
3 Use the rotary selector to select and enter
[CONTINUE] or [SINGLE].
CONTINUE: Moving to the previous or following track is possible in all
modes.
SINGLE: The letters [TRACK] on the main unit display switch to [SINGLE]
and it is no longer possible to move to the previous or following track
other than with the track search and search buttons.
! For tracks on music CDs, operation is the same as in the
[CONTINUE] mode, regardless of this setting.
Descriptions
Sets whether or not to display the
tracks' ON AIR status on the main
unit display. When connected by
PRO DJ LINK to a mixer support-
ing the ON AIR DISPLAY function
(e.g. DJM-2000nexus), it is pos-
sible to display the ON AIR status
in association with the operation
of the mixer's channel fader and
crossfader. Also see the operating
instructions of the mixer supporting
the ON AIR DISPLAY function.
Sets the main unit display's
language.
Selects whether or not to display
Pioneer MEP-7000 libraries.
For details, see Setting the playing
history list name on page 33.
Sets this unit's player number. The
player number cannot be changed
when a medium is loaded in this
unit.
When PRO DJ LINK connections
are made, the connection status is
displayed here.
For details, see Changing the MIDI
channel setting on page 36.
This switches the number of bits of
the audio signals output from the
[DIGITAL OUT] terminal.
For details, see Setting the auto
standby mode on page 33.
Sets the main unit display's
brightness.
When set to [ON], the screensaver
starts up in the following cases:
!
When no track is loaded in this
unit for over 5 minutes
!
When no operation is per-
formed for over 100 minutes
while in the pause or cue
standby mode or when [END]
is displayed on the main unit
display.
For details, see Duplicating the set-
tings onto DJ players connected by
PRO DJ LINK on page 34.
Displays this unit's software
version.
Setting the auto standby mode
1 Display the [UTILITY] screen.
= Displaying the [UTILITY] screen (p.32)
2 Use the rotary selector to select and enter [AUTO
STANDBY].
3 Use the rotary selector to select and enter [ON] or
[OFF].
When [AUTO STANDBY] is set to [ON], the auto standby function is
activated and the standby mode is set in the cases described below.
! When absolutely no operation is performed for over 4 hours with no
disc or USB device connected, no PRO DJ LINK connections and no
computer connected to the USB terminal (on this unit's rear panel)
! When this unit is operated, the standby mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
Setting the playing history list name
Names of playing history stored on USB devices can be preset.
1 Display the [UTILITY] screen.
= Displaying the [UTILITY] screen (p.32)
2 Use the rotary selector to select and enter [HISTORY
NAME].
3 Using the rotary selector to input characters.
Only the tracks including the character you have input are displayed.
! When more characters are input, only the tracks including the char-
acter string you have input are displayed.
! When the [BACK] button is pressed, the category selection screen
reappears.
4 Press the rotary selector to enter.
The name is changed to the name you have input.
! When the name of the playing history list is changed, the number
after the playing history list name returns to 001. This number is
incremented each time a playing history list is created.
! The maximum number of characters that can be set for the
[HISTORY] name is 32, including both letters, numbers and symbols.
Changing the language
Select the language to be used for displaying track names and mes-
sages on the screen.
! When the language is changed, the messages on the main unit
display are displayed in the selected language.
! When displaying track names, etc., to display characters written in
local codes other than Unicode, change the [LANGUAGE] setting.
1 Display the [UTILITY] screen.
= Displaying the [UTILITY] screen (p.32)
2 Use the rotary selector to select and enter
[LANGUAGE].
3 Use the rotary selector to select and enter the
language.
The language of the on-screen display is changed.
33
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdj-900nexus

Table of Contents