Duplicating the settings onto DJ
players connected by PRO DJ LINK
The [UTILITY] settings and other settings can be duplicated onto DJ play-
ers connected by PRO DJ LINK.
! The duplicated settings are as shown below.
— [UTILITY] settings
PLAY MODE, EJECT/LOAD LOCK, AUTO CUE LEVEL, SLIP
FLASHING, ON AIR DISPLAY, LANGUAGE, LCD BRIGHTNESS
— Other settings
TIME MODE (how the time is displayed on the main unit display),
AUTO CUE, JOG MODE, TEMPO RANGE, MASTER TEMPO,
QUANTIZE, SYNC
1 Select [DUPLICATION] and enter.
2 Stop playback on the DJ player(s) on which you want
to reflect the settings.
3 Use the rotary selector to select and enter [PLAYER X]
or [ALL].
[PLAYER1]–[PLAYER4]: The settings are duplicated on the specified DJ
player. Currently playing DJ players cannot be selected.
[ALL]: The settings are duplicated on all the DJ players connected by
PRO DJ LINK. The settings cannot be duplicated on currently playing DJ
players.
[DUPLICATED] is displayed on the specified player’s display and this
unit’s [UTILITY] settings and other settings are duplicated on the speci-
fied player.
[DEFAULT]: Restores this unit’s settings to the settings set upon
purchase.
About the driver software
(Windows)
Installing the driver software
! There is no need to install the driver software when using Mac OS X.
Operating environment
Supported operating systems
1
32-bit version
®
®
Windows
8/Windows
8 Pro
1
1
64-bit version
1
32-bit version
®
Windows
7 Home Premium/Professional/Ultimate
1
1
64-bit version
®
1
32-bit version
Windows Vista
Home Basic/Home Premium/
Business/Ultimate
1
1
64-bit version
®
1
Windows
XP Home Edition/Professional (SP2 or later) 32-bit version
1 When using a 64-bit version of Windows, the driver software can only be used for
32-bit applications.
Before installing the driver software
! Read Software end user license agreement on page 7carefully.
! If you connect this unit to your computer without installing the driver
software first, an error may occur on your computer depending on
the system environment.
! If installation of the driver software is interrupted after it has started,
start the installation procedure over again from the beginning.
1 Press this unit’s u switch, then disconnect the USB
cable connecting this unit to the computer.
2 Log in as the user set as the computer’s administrator.
3 Quit any other programs running on the computer.
4 Insert the CD-ROM into the computer’s optical drive.
The CD-ROM menu is displayed.
En