Basic Operation; Turning The Power On; Turning The Power Off; Loading And Ejecting Discs - Pioneer CDJ-900NXS Operating Instructions Manual

Basic Operation

Turning the power on

1 Make all the connections, then plug the power cord
into a power outlet.
= Connections (p.10)
2 Press the [u] switch.
This unit's indicators light and the power turns on.

Turning the power off

Press the [u] switch.
This unit's power turns off.
! Do not disconnect the USB device or turn off this unit's power while
the USB indicator is lit or flashing. Doing so could delete this unit's
management data and damage the USB device, making it impos-
sible to read.

Loading and ejecting discs

! This unit is a one-disc player. Do not insert multiple disc.
! Do not force discs into the disc insertion slot when this unit's power
is off. Doing so could damage the disc and lead to malfunction of
this unit.
! When the disc is being drawn in or ejected, do not apply any force
to the disc in the direction opposite its movement. Doing so could
damage the disc or this unit.
Inserting discs
1 Press the [u] switch to turn this unit's power on.
2 Insert the disc horizontally into the disc insertion slot,
with the printed surface facing up.
Playback starts after the medium's information has been read.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the uppermost
layer.
! When auto cue is turned on, the disc pauses at the audio start posi-
tion. In this case, press the [PLAY/PAUSEf] to start playback.
= For details on auto cue, see Setting auto cue on page 23.
! When a USB device that has previously been connected to this unit
or a to Pioneer DJ player is connected and a disc is inserted, the
number of discs for which disc information is stored is displayed for
several seconds on the main unit display.
Ejecting discs
1 Press the [DISC EJECTh] button to eject the disc.
The disc is ejected from the disc insertion slot.
2 Pull the disc out, being careful not scratch its signal
surface.
! If the [DISC EJECTh] button is pressed accidentally, press the
[PLAY/PAUSEf] button immediately. Disc ejection is canceled
and the unit is reset to as it was directly before the [DISC EJECTh]
button was pressed. (No sound is output during the resetting
process.)
! When [EJECT/LOAD LOCK] on the [UTILITY] menu is set to [LOCK],
discs cannot be ejected during playback. Either set [EJECT/LOAD
LOCK] to [UNLOCK] or press the [PLAY/PAUSEf] button to
pause playback, then press the [DISC EJECTh] button.
 About the resume function
If a disc is ejected during playback, when that same disc is reloaded,
playback resumes from the point playing when the disc was ejected. If
a disc is ejected while pausing, when that disc is reloaded, it pauses at
the same point as when it was ejected. These points are stored in the
memory until this unit's power is turned off or a different disc is loaded.
! This function cannot be used with USB devices.
Connecting and disconnecting USB
devices
Connecting USB devices
1 Press the [u] switch to turn this unit's power on.
2 Connect the USB device to the USB device insertion
slot.
19
En