Connecting A Bluetooth Device - Subaru Navigation System Owner's Manual

MEDIA OPERATION
NOTE
Depending on the Bluetooth device that is connected to the
system, the music may start playing when selecting
it is paused. Conversely, the music may pause when selecting
while it is playing.
In the following conditions, the system may not function:
The Bluetooth device is turned off.
The Bluetooth device is not connected.
The Bluetooth device has a low battery.
It may take time to connect the phone when Bluetooth audio is
being played.
For operating the portable player, see the instruction manual that
comes with it.
If the Bluetooth device is disconnected due to poor reception
from the Bluetooth network when the ignition switch is turned
to the "ACC" or "ON" position, the system will automatically
reconnect to the portable player.
If the Bluetooth device is disconnected on purpose, such as it
was turned off, this does not happen. Reconnect the portable
player manually.
Bluetooth device information is registered when the Bluetooth
device is connected to the Bluetooth audio system. When
selling or disposing of the vehicle, remove the Bluetooth audio
84

CONNECTING A Bluetooth DEVICE

while To use the Bluetooth audio system, it is necessary to
register a Bluetooth device with the system.
Registering an additional device
1.
Select
Select Device
audio control screen.
2.
Selecting a registered device
1.
Select
Select Device
audio control screen.
2.
(Select Device) on the Bluetooth
(Select Device) on the Bluetooth