Subaru Navigation System Owner's Manual page 228

SETUP
3.
Select the items to be set.
No. Function
Select to select the display mode from 2D north-up, 2D
heading-up or 3D.
Select to adjust the standard zoom and the angle of tilt.
You can set the level in three stages.
Select to turn the auto zoom function on or off.
Select to automatically reduce the scale of the 2D map
to display the entire route.
226
No. Function
Select to select the screen color used in daytime mode.
Select to select the screen color used in nighttime mode.
Select to select the switches that display on the map.
Select to turn the path log save function on or off (saves
in positional order for each trip).
Select a spot displayed on the map during navigation.
Select the check box to show or hide the spot category.
Select the spot category name to open a sub-category.
(More): Select to save the currently displayed
More
spot position, or read spot displays saved previously.
You can also restore the default display settings.
By turning ON the "Auto Zoom (Auto Zoom)" function,
"Viewpoint (Viewpoint)" and "Automatic Overview
(Automatic Overview)" cannot be set.
UNITS AND FORMATS
Sets the units used by the program to measure distance.
Voice guidance languages do not support all units displayed
in the list.