Creating A Route - Subaru Navigation System Owner's Manual

3.
Select , if a warning message is displayed, select
which operation to perform.
current position) for the route.
4.
Select the route's start point by using the same method
as selecting the destination.
5.
Set the new start point and then select
The vehicle marker goes clear on the map, indicating
that there is no GPS reception.
If a route is already being navigated, it is recalculated
using the position selected at that time.
To
Turn on GPS
message is displayed, select which operation to
perform.

CREATING A ROUTE

You can create a route for each destination in the saved
routes menu.
1.
Display the "Change Route (Change Route)" screen.
2.
Select
(Go!).
Go!
Create Route
route is not set.
3.
Select
Only one row showing the route's start point (current
position displayed) is displayed in the route point list.
4.
return to standard navigation,
(Turn on GPS), and if a warning
(Create Route).
Create Route
(Create Route) is displayed when a
to select a destination.
ROUTE GUIDANCE
select
8
217